A fundamentally new method is proposed for assessing the plastic response of a material to dynamic loading during tests of cylindrical specimens impacted against a rigid barrier. Unlike the traditional Taylor test, this study considers a temporal yield criterion based on the concept of incubation time. This approach allows for a transition from averaged rate-based estimates to a more accurate and physically grounded description of material behavior over time. Impact tests of cylindrical specimens against a rigid anvil were conducted to determine the yield strength exhibited by the material at various impact velocities. The material behavior under high rate elastoplastic deformation was investigated. The impact-on-anvil test incorporates new dynamic characteristics of the material, which define the rate sensitivity of the yield strength based on the incubation time criterion. The test results are interpreted as a time-dependent yield strength, i.e., the threshold amplitude of the impact load as a function of its duration. It is shown how the parameters that enable prediction of the rate and temporal dependence of the yield strength under arbitrary impact-wave loading can be estimated from a single test.
Coarse-grained and fine-grained M1 copper is experimentally investigated using a new methodology for processing the results of anvil impact tests. Dynamic test data are supplemented by yield strength measurements in static tests and microstructural studies before and after impact testing. Key parameters characterizing the material response to high-speed loading are evaluated within the incubation time approach, which provides new insights into the dynamic behavior of copper with different grain structures. Comparison is made between the results of classical Taylor tests and the data derived within the new approach, which allows the yield strength to be predicted under both impulse and high-speed loading. It is shown that coarse-grained or fine-grained specimens can exhibit higher strength depending on the loading rate.
Unlike conventional polycrystalline alloys, Cu-Al-Ni single crystals exhibit brittleness under quasi-static loading. They show no conventional plasticity and fracture after martensite reorientation. This study demonstrates that the mechanical behavior of a single-crystal Cu-Al-Ni shape memory alloy produced by the Stepanov method is highly sensitive to strain rate. High-strain-rate loading of a Cu-Al-Ni single crystal specimen, conducted using the Split Hopkinson Pressure Bar technique, activates a previously unobserved deformation mechanism that produces significant irreversible plastic-like strain, which is absent under quasi-static conditions. Despite substantial deformation, the material retains its shape memory functionality and exhibits superior recovery strain compared to a reference TiNi shape memory alloy. The formation of a scaly surface structure and internal features resembling slip bands under dynamic loading indicates the activation of a unique plasticity mechanism. Thus, Cu-Al-Ni single crystals undergo a fundamental transition from brittle to plastic-like behavior under high-strain-rate loading, while retaining a superior shape memory effect.