Shushu Zhu

Dr. Shushu Zhu


Research Focus & Metrics

Academic Career Length

11Years (2016-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
26 October 2018 in IEEE Transactions on Industrial Electronics
Verified
Journal Article
Closed access
Kai WangKai Wang
Kai Wang
JLJian Li
Jian Li
SZShushu Zhu
Shushu Zhu
CLChuang Liu
Chuang Liu
This paper presents two novel consequent-pole permanent magnet (PM) (CPM) machines which featuring N-iron-N-iron-N-S-iron-S-iron-S and iron-S-iron-S-iron-iron-N-iron-N-iron sequences. Furthermore, the tangential PMs are embedded into the proposed CPM machines, and thus enhance output torque and reduce the torque ripple. The principle of the elimination of unipolar leakage flux and the performance improvement by hybrid-pole are analyzed based on the simplified PM magnetic circuit. Then, the rotors of proposed CPM and HPM machines are optimized by finite element analyses. Furthermore, the electromagnetic performances of the proposed machines, including the open-circuit airgap flux density, average torque, torque ripple, loss, efficiency, unbalanced magnetic force, demagnetization withstand capability and unipolar leakage flux, are compared with the conventional SPM and CPM machines. It is demonstrated that both the conventional CPM and proposed HPM machines have >20% higher utilization ratio of PM material than the SPM machine. The proposed HPM machine can obtain almost equivalent torque and efficiency when compared to the conventional CPM machine. Moreover, unipolar leakage flux does not exists in the end shaft of the proposed machines, and thus the magnetization of the mechanical components can be effectively eliminated. Finally, a 9-slot/10-pole HPM machine is prototyped and measured to validate the analyses.

18 July 2017 in IEEE Transactions on Energy Conversion
Verified
Journal Article
Closed access
YHYaohua Hu
Yaohua Hu
SZShushu Zhu
Shushu Zhu
CLChuang Liu
Chuang Liu
Kai WangKai Wang
Kai Wang
An interior permanent magnet (IPM) machine with ∇ + U shape rotor topology is proposed and its electromagnetic performance with typical V shape and ∇ shape for electric vehicle (EV) applications are compared. The pole-arc to pole-pitch ratios are optimized to maximize the fundamental air-gap flux density and minimize its total harmonic distortion (THD) of all the three IPM machines by the finite element (FE) method. It can be obtained that ∇ + U shape rotor topology has the lowest THD of the air-gap flux density. The back electromotive force and its THD orders, cogging torque, torque density, torque ripple, d- and q-axis inductances, saliency ratio, and iron loss of three machines are analyzed and compared. It is demonstrated that the ∇ shape IPM machines have the highest average torque, and the torque ripples of the V shape and ∇ shape machines are almost the same. The ∇ + U shape IPM machine has the lowest torque ripple and iron loss with only a little reduction of average torque. Finally, the ∇ + U shape IPM machine is prototyped to verify the results of the FE analysis.

19 June 2018 in IEEE Transactions on Magnetics
Verified
Journal Article
Closed access
SZShushu Zhu
Shushu Zhu
WCWeifang Chen
Weifang Chen
MXMingqiu Xie
Mingqiu Xie
CLChuang Liu
Chuang Liu
Kai WangKai Wang
Kai Wang
Electromagnetic performance of three multi-layered interior permanent magnet (IPM) machines are investigated and compared for electric vehicle applications in this paper. The rotor structure, air-gap field distribution, torque density, torque ripple, core loss, magnet eddy-current loss, and output power are studied with finite-element analysis. It is demonstrated that the two-layered rotor structure with magnets buried deeply has the lower torque density and magnet eddy-current loss due to the utilization of magnets and the block effects of the armature-reaction flux is lower. The three-layered IPM machine has the lower torque ripple and core loss than two-layered IPM machines because the harmonics of air-gap density are reduce by the increase of magnet layers. Finally, an IPM machine with three-layered magnets rotor is prototyped to verify the analysis.

25 May 2021 in IEEE Transactions on Magnetics
Verified
Journal Article
Closed access
YHYaohua Hu
Yaohua Hu
SZShushu Zhu
Shushu Zhu
LXLilin Xu
Lilin Xu
BJBin Jiang
Bin Jiang
Electromagnetic performance of high-speed permanent magnet synchronous machines (PMSMs) is studied for electro-hydrostatic actuator (EHA) applications in this article. The electromotive force (EMF) of different magnet pole-arc to pole-pitch ratios is studied. The no-load air-gap density, cogging torque, average torque, torque ripple, core loss, and rotor eddy current losses are investigated by closed slots design. The rotor eddy current losses of different magnetic retaining sleeve materials such as stainless steel, titanium alloy, and carbon fiber are calculated by finite-element analysis (FEA). The results show that, compared with the opening slot structure, the torque ripple and the rotor eddy current losses of closed slot structure are extremely reduced due to the fact that the 11th and 13th harmonics of air-gap flux density are significantly reduced and the slotting effect are effectively weakened. Increase the closed slot height not only reduce the average torque and increase the core loss but also the torque ripple and the rotor eddy current losses reduction effect is slight. A high-speed PMSM with closed slots design is prototyped to verify the analysis.

20 December 2018 in IEEE Transactions on Industrial Electronics
Verified
Journal Article
Closed access
LZLufeng Zhang
Lufeng Zhang
Kai WangKai Wang
Kai Wang
HSHaiyang Sun
Haiyang Sun
SZShushu Zhu
Shushu Zhu
For the five-phase PM machines with conventional Halbach array rotor, although the third harmonic current is injected into the phase current, the torque density hardly increases due to the absence of the third harmonic air-gap flux density. Hence, a Halbach array considering third harmonic air-gap flux density is proposed in this paper, and the topology is described and compared with the conventional Halbach array. The magnetizing angle of the proposed Halbach array and the stator teeth width are optimized based on the non-linear programing method. The electromagnetic performances of the five-phase PM machines with proposed Halbach array, including open-circuit flux density, back-EMF, flux density under the rated load, cogging torque, average torque, torque ripple, loss and efficiency, are compared with the PM machine with conventional Halbach array by finite element (FE) method. It is demonstrated that the torque density and efficiency of the PM machine with proposed Halbach array are higher than that of the PM machine with conventional Halbach array. Finally, the five-phase 10-slot/8-pole PM machines with proposed Halbach array is manufactured and tested to verify the analysis.

1 April 2016 in IET Electric Power Applications
Verified
Journal Article
Open access
PDF file
SZShushu Zhu
Shushu Zhu
CLChuang Liu
Chuang Liu
KWKai Wang
Kai Wang
YHYaohua Hu
Yaohua Hu
YNYinhang Ning
Yinhang Ning
This paper proposes a novel integrated brushless excitation method (IBEM) for a rotor‐excited generator. IBEM is applied to a rotor‐excited hybrid excitation synchronous generator (HESG) to realise brushless excitation while the key features of the rotor‐excited generator are maintained. The new generator is referred as IBE HESG here. The stator excitation windings are buried in the stator slots. The static excitation field is established in the air gap when there is dc excitation current in the stator excitation windings. The three‐phase armature coils of the rotor induce the static excitation field and provide the dc excitation current for the rotor excitation windings via a rotating rectifier. The operating principles are discussed theoretically. The magnetic field distribution and the operating characteristics are studied by finite‐element analysis. The no‐load, external, regulation and excitation characteristics are analysed. Compared with the brush excitation HESG, the rotor excitation current is able to meet the requirement and the output voltage is conveniently regulated by the stator excitation current. Finally, a 1.5 kVA prototype is fabricated to test the operating characteristics of IBE HESG. It demonstrates that the brushless excitation is realised and the output voltage is regulated by the stator excitation current.