Yaohua Hu

Yaohua Hu


Research Focus & Metrics

Academic Career Length

11Years (2016-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
18 July 2017 in IEEE Transactions on Energy Conversion
Verified
Journal Article
Closed access
YHYaohua Hu
Yaohua Hu
SZShushu Zhu
Shushu Zhu
CLChuang Liu
Chuang Liu
Kai WangKai Wang
Kai Wang
An interior permanent magnet (IPM) machine with ∇ + U shape rotor topology is proposed and its electromagnetic performance with typical V shape and ∇ shape for electric vehicle (EV) applications are compared. The pole-arc to pole-pitch ratios are optimized to maximize the fundamental air-gap flux density and minimize its total harmonic distortion (THD) of all the three IPM machines by the finite element (FE) method. It can be obtained that ∇ + U shape rotor topology has the lowest THD of the air-gap flux density. The back electromotive force and its THD orders, cogging torque, torque density, torque ripple, d- and q-axis inductances, saliency ratio, and iron loss of three machines are analyzed and compared. It is demonstrated that the ∇ shape IPM machines have the highest average torque, and the torque ripples of the V shape and ∇ shape machines are almost the same. The ∇ + U shape IPM machine has the lowest torque ripple and iron loss with only a little reduction of average torque. Finally, the ∇ + U shape IPM machine is prototyped to verify the results of the FE analysis.

5 July 2017 in IEEE Transactions on Industrial Electronics
Verified
Journal Article
Closed access
SZShushu Zhu
Shushu Zhu
YHYaohua Hu
Yaohua Hu
CLChuang Liu
Chuang Liu
Kai WangKai Wang
Kai Wang
An interior permanent magnet (IPM) machine with ∇+U shape rotor topology is proposed for electric vehicle applications whose iron loss and efficiency are compared to that of typical V shape and ∇ shape machines. The air-gap flux density, flux-density waveform, and its harmonics on stator core and rotor core are analyzed. It can be obtained that ∇+U shape rotor topology has the lowest total harmonic distortion. The torque ripple, core loss, core loss density, PM eddy-current loss, d- and q-axis inductances, saliency ratio, characteristic current, and efficiency of three IPM machines are analyzed and compared. It is demonstrated that the efficiency of ∇+U shape IPM machine is higher than V shape and ∇ shape machines, particularly under high-speed operation, because the iron loss of the ∇+U shape machine is the lowest. With the increase of PM layer, the PM eddy-current loss is increased, PM segmentation can effectively reduce the PM eddy-current loss. Finally, the ∇+U shape IPM machine is prototyped to verify the results of the finite element analysis.

3 May 2017 in IEEE Transactions on Magnetics
Verified
Journal Article
Closed access
YHYaohua Hu
Yaohua Hu
SZShushu Zhu
Shushu Zhu
CLChuang Liu
Chuang Liu
The magnet eddy-current losses of six interior permanent magnet (IPM) machines are investigated for electric vehicle applications in this paper. The armature field, eddy-current density of magnet, the influence of PM depth, the distance of PM layers, and the number of PM segmentation are studied by finite-element analysis. It is demonstrated that increasing the PM depth of first layer and the distance of PM layers can provide more soft iron space for the armature-reaction flux, which can reduce the magnet eddy-current loss. PM segmentation can effectively reduce the PM eddy-current loss, because the eddy-current paths are divided into smaller loops, increasing the effective resistance. An IPM machine with segmented PM is prototyped to verify the analysis.

18 March 2020 in IEEE Transactions on Energy Conversion
Verified
Journal Article
Closed access
SZShushu Zhu
Shushu Zhu
YHYaohua Hu
Yaohua Hu
CLChuang Liu
Chuang Liu
Kai WangKai Wang
Kai Wang
JYJunyue Yu
Junyue Yu
BJBin Jiang
Bin Jiang
The static excitation part of a brushless wound rotor hybrid excitation generator without an exciter (brushless WRHEG) is analyzed in this paper. The DC stator excitation windings and rotor harmonic coils are placed in the iron core as the excitation part, so that the brushless excitation for a wound rotor hybrid excitation generator (WRHEG) can be realized. In this study, the selection of stator excitation windings and rotor harmonic coils, which are essential for achieving of the brushless excitation, is providing. The effect of the static magnetic field on the air-gap magnetic field is studied theoretically. The harmonic content of the air-gap magnetic field is analyzed by Fourier series form and the effect of harmonics on the output voltage is also investigated. The influence of the static excitation field on the iron loss is also considered. A 1.5kVA prototype is fabricated to verify the validity of the theoretical and Finite Element (FE) analysis. The output voltage under the no-load and the rated load conditions are measured. The field regulation capacity and the efficiency of the brushless WRHEG are tested. It shows that the brushless excitation is achieved by remaining the operating performance of WRHEG unchanged.

30 October 2020 in IEEE Transactions on Magnetics
Verified
Journal Article
Closed access
SZShushu Zhu
Shushu Zhu
YHYaohua Hu
Yaohua Hu
CLChuang Liu
Chuang Liu
Bin JiangBin Jiang
Bin Jiang
The shaping of the air-gap of a V-typed fractional slot concentrated windings interior permanent magnet synchronous machines (IPMSM) is investigated for compressed-air systems (CAS) applications in this paper. The harmonics of no-load air-gap density, average torque, torque ripple, and iron losses are studied by the finite element analysis (FEA). The results show that the air-gap shaping of V-typed IPMSM can be effectively used to reduce the torque ripple and stator core loss. It is because that the low order harmonics of air-gap flux density can be reduced with the little decrease of the average torque. The proposed air-gap shaping methods have the advantages of simple design and simple manufacture. A V-typed IPMSM with air-gap shaping is prototyped to verify the correctness of the analysis results.

2 August 2018 in IEEE Transactions on Magnetics
Verified
Journal Article
Closed access
SZShushu Zhu
Shushu Zhu
YHYaohua Hu
Yaohua Hu
CLChuang Liu
Chuang Liu
Kai WangKai Wang
Kai Wang
WCWeifang Chen
Weifang Chen
Stator core loss of four interior permanent magnet (IPM) machines is studied for electric vehicle applications in this paper. The no-load air-gap density, core loss density, core loss harmonics, and the segregation of hysteresis and eddy current losses are investigated with finite-element analysis. The results show that the rotor surface shaping of a single-layered IPM machine and increasing the rotor magnet layers can reduce the stator core loss due to the harmonics of the rotor magnetomotive force. The stator core loss reduction effectiveness of rotor surface shaping is similar to a two-layered magnet configuration, but the reduction effectiveness is less than that the magnet layers increased to three numbers. An IPM machine with three-layered magnets rotor is prototyped to verify the analysis.