In this study, a comprehensive overview of the available autonomous ground platforms developed by universities and research groups that were specifically designed to handle agricultural tasks was performed. As cost reduction and safety improvements are two of the most critical aspects for farmers, the development of autonomous vehicles can be of major interest, especially for those applications that are lacking in terms of mechanization improvements. This review aimed to provide a literature evaluation of present and historical research contributions toward designing and prototyping agricultural ground unmanned vehicles. The review was motivated by the intent to disseminate to the scientific community the main features of the autonomous tractor named BOPS-1960, which was conceived in the 1960s at the Alma Mater Studiorum University of Bologna (UNIBO). Jointly, the main characteristics of the modern DEDALO unmanned ground vehicle (UGV) for orchard and vineyard operations that was designed recently were evaluated. The basic principles, technology and sensors used in the two UNIBO prototypes are described in detail, together with an analysis of UGVs for agriculture conceived in recent years by research centers all around the world.

A tractor losing lateral stability starts to rollover. It is a matter of fact that tractor lateral rollover accidents are one of the most frequent causes of death and injuries for farmers. Consequently, tractors are fitted with a specific protective structure to minimize the consequences for the driver during the rollover (ROPS). The narrow-track tractor, designed to operate in vineyards and orchards, is a tractor category with a very narrow track width and the risk of rollover is higher. The aim of the study was to evaluate the compact narrow-track tractor types commercially available, designed to mount a cantilever engine in the forward position with effects on the Center of Gravity (CoG) because more than 50% of the tractor weight is loaded on the front axle, and, specifically, the articulated narrow-track tractors where the stability is affected by the pivot point connecting the two tractor bodies. As a consequence of the typical tractor design of articulated tractors, during the steering action the line passing through the front and rear tire contact points on the ground changes, influencing the tractor’s stability. The approach of the research was based on reproducing the lateral stability tractor condition by developing a kinematic model, with the goal to virtually simulate the tractor behavior and to calculate the lateral stability angle for articulated tractors. The innovative contribution of this paper was the tractor articulation joint modeling, assuming a virtual pivot point to reproduce two relatives’ rotations between the front and rear bodies of the tractor: vertical (yaw angle) and longitudinal (roll angle) rotations. The lowest value of the stability angle was 39.3°, measured at −35° yaw angle. The model at the tractor design stage will allow adjusting of the tractor parameters to improve the lateral stability performance.

Precision farming is the newest agricultural approach in countries with highly mechanized field operations, and the role of unmanned ground vehicles (UGVs) in smart farming is becoming increasingly prominent. This work aimed to evaluate the stability of the DEDALO UGV developed by the University of BOLOGNA for precision orchard and vineyard management. The driving part of the machine is somewhat peculiar; it moves autonomously in the field combined with a tank to store water and pesticide mixture for crop protection, with an additional structure to carry agricultural implements. The study aimed to evaluate the stability of the agricultural unladen UGV, and mulcher and sprayer mounted configurations. In the case of the sprayer, the stability behavior was evaluated with an empty and full tank. The machine, in terms of stability, was studied both laterally and longitudinally. A theoretical model was developed based on the upstream side forces measured during experimental tipping tests. The results of the experimental data were compared with the theoretical predicted results to validate the model. In the lateral test, the average value of the limit stability angle was 48 degrees, while in the longitudinal test, it was 49 degrees. The results of the model were statistically correlative (R² > 95) and denoted that the most stable condition occurred in the case of the UGV fitted with the mulcher in the longitudinal tipping position (56 degrees), while the most unstable condition was the case of the unladen UGV in the longitudinal tipping position (40 degrees). Although the stability problem is not directly connected with the operator, as these machines do not require a driver, the lack of stability can lead to the UGV overturning with consequent risks for the surrounding environment and damage to the UGV body.

As agricultural tractors function under various soil and environmental conditions, optimising their design and paraameter settings for enhanced traction performance is essential for maximising their operational efficiency. This study aimed to assess the traction capabilities of standard tractors, ensuring effective operations even under highly demanding conditions. A traction load measurement system was refined to collect performance data, and standardised tests were conducted on a concrete track to evaluate key traction metrics. The analysis considered drawbar pull, traction force, travel reduction (slip), and net traction ratio. Two tractors from the same model series, featuring similar design characteristics but differing in engine power, were compared. Three primary parameters—tractor mass, tyre pressure, and engine power—were evaluated across six distinct operating conditions. Results recorded at forward speeds below 6 km/h indicated that lower tyre pressure led to an increased net traction ratio due to the enhanced drawbar pull. Additionally, an increase in tractor mass contributed to a higher drawbar pull, which, in turn, improved traction force across all speed ranges. The maximum traction force was not significantly affected between 66 kW and 86 kW tractors at speeds up to 4 km/h. Meanwhile, the traction force remained high up to velocities of 6 km/h in the 86 kW tractor. The efficiency (i.e., the ratio between measured and declared power) varied between 64% and 70% for the 66 kW tractor and between 70% and 74% for the 86 kW tractor. The travel reduction was mainly affected by the power of the tractor. The slip caused a reduction close to 4 and 6 km/h for the 66 kW and 86 kW agricultural tractors, respectively. Overall, the proper adjustment of tractor parameters significantly impacted their traction performance, and the findings provide valuable insights for improving tractor designs and field applications.

In order to better understand the complexities of modern tractor rollover, this paper investigates the energy absorbed by a Roll-Over Protective Structure (ROPS) cab during controlled lateral rollover testing carried out on a modern narrow-track tractor with a silent-block suspended ROPS cab. To investigate how different tractor set-ups may influence ROPS and energy partitioning, tests were conducted with two different wheel configurations, wide (equivalent to normal ‘open field’ operation) and narrow (equivalent to ‘orchard/vineyard’ operation), and refer to both the width of the tires and the corresponding track. Dynamic load cells and displacement transducers located at the ROPS-ground impact points provided a direct measurement of the energy absorbed by the ROPS cab frame. A trilateration method was developed and mounted onboard to measure load cell trajectory with respect to the cab floor in real-time. The associated video record of each rollover event provided further information and opportunity to explain the acquired data. The narrow tire configuration consistently subjected the ROPS cab frame to more energy than the wide tire arrangement. To better evaluate the influence of the ROPS cab silent-blocks in lateral rollover, static and dynamic tests were performed. The results confirm that tires influence the energy partition significantly and that further understanding of silent-blocks’ dynamic performance is warranted.