Frying is an old method of processing food, especially fish. Mackerel is one of the most consumed fish worldwide because of its high nutritional value. Previously, only a study on the effects of deep frying of fried mackerel has been performed. However, no study has been conducted on the effects of different frying methods on the physiochemical and nutritional properties of chub mackerel. Therefore, in this study, we evaluated the physiochemical and nutritional characteristics of deep fried, vacuum fried, and air fried chub mackerel. Thawing methods were compared and the best method was selected. High frequency defrosting (HFD) was used to thaw frozen fillet mackerel before frying. Response surface methodology (RSM) was used to optimize the temperature and frying time of the three frying methods. The physiochemical and nutritional characteristics, including volatile basic nitrogen (VBN), thiobarbituric acid-reactive substances (TBARS), pH, overall acceptance, proximate, fatty acid, and amino acids of fried mackerel were investigated. The HFD exhibited the lowest number of drips with a short thawing time. The RSM showed that the optimum temperature and frying time for deep, vacuum, and air frying were 165 °C for 3 min, 95 °C for 7 min, and 160 °C for 15 min, respectively. Vacuum frying showed the lowest increase in VBN, TBARS, and pH, and significantly (p < 0.05) differed from the others. It also resulted in increased amino acid and preserved fatty acid content. These findings suggest that vacuum frying is the best frying method which has little oxidation and can maintain nutrition. The results of this study could be applied in the fisheries industry to produce the best fried mackerel and preserve its high nutritive value.

Phlorotannins have been proven to contain numerous bioactive compounds that have potential to be applied in variety industries, including cosmetics, functional foods, nutraceuticals, environmental management, and medicine. The larvicidal and growth-inhibiting properties of phlorotannins have been extensively studied in various organisms. However, the toxicity of the phloroglucinol oligomer of phlorotannin is unclear, especially in Artemia salina, Daphnia magna, Lactuca sativa, and Chlorella vulgaris, which are commonly used in many bioassays. Therefore, research using these four organisms should be designed to provide basic information about the toxic effects of phlorotannins and phloroglucinol. This study aimed to evaluate the larvicidal and inhibitory properties of phlorotannins and phloroglucinol on A. salina, D. magna, L. sativa, and C. vulgaris. Phlorotannin extract and phloroglucinol were administered at various concentrations to each test organism. The survival rate of A. salina nauplii and D. magna neonates was observed every 24 h to 72 h, whereas the L. sativa seed germination and inhibition rate of C. vulgaris were observed up to 96 h. The results showed that the 24 h LC50 of phlorotannin on A. salina and D. magna were 10.67 and 1.32 mg/mL, respectively. The germination inhibition of L. sativa was 53.3% with a seed growth of less than 4 mm after 96 h upon exposure to 1 mg/mL of phlorotannin. Freshwater and seawater C. vulgaris experienced yield inhibition of 39.47 and 43.46%, respectively, when 2 mg/mL of phlorotanin was added. These results indicate that phlorotannin affects the survival and growth of the test organisms, so its use as a pesticide, herbicide, and algaecide agent for environmental and aquaculture applications can be further studied.

The seafood processing industry generates significant waste, including mackerel heads (MH), constituting 20–32% of total waste. This study explored the potential of utilizing MH as a feed source for black soldier fly larvae (BSF larvae). BSF larvae are known for their ability to efficiently convert organic materials into nutrient-rich biomass. Five concentrations of MH (0, 10, 20, 30, 40, and 50% in chicken feed) were fed to BSF larvae for eight days. After harvesting, their growth, MH conversion efficiency, nutritional content, and heavy metals reduction potential were measured. BSF larvae showed optimal growth when fed with a feed containing 20% MH, resulting in a 14.36-fold increase in weight compared to the control group, as determined by the Fisher’s Least Significant Difference Test. BSF larvae maintained a survival rate of 99.33%. With the lowest feed conversion ratio (FCR) of 2.09 at 20% MH, feed efficiency was improved by up to 65.15%, and feed reduction up to 73.53%. MH enhanced lipid and protein content in BSF larvae. Furthermore, BSF larvae in this study showed higher polyunsaturated fatty acids (PUFA), including eicosapentaenoic acid (EPA) and docosahexaenoic acid (DHA), as well as other amino acids which are required for breeding animals. The current study highlights the potential of MH as a feed source for BSF larvae, improving nutritional biomass. It also suggests BSF larvae as an eco-friendly option for handling seafood processing waste and as an alternative feed source for animals.

Seaweeds are a major source of functional foods, nutraceuticals, and pharmaceuticals. Seaweed can be sustainably harvested through callus culture, which yields homogenous cells and bioproducts under controlled conditions. Callus induction is a crucial early step in callus culture and is influenced by several abiotic factors. This review aims to discuss the influence of abiotic factors on callus induction in seaweeds, a prerequisite for the application and development of seaweed callus culture. We used three online databases (Springer, Science Direct, and Wiley) to search for the literature on seaweed callus induction published between 1987 and 2020. Thirty-three articles for review were identified and analyzed using the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) guidelines. The analysis covers 56 seaweed species (3% Chlorophyta, 44% Phaeophyta, and 53% Rhodophyta) under various abiotic treatments, including light irradiance (23%), temperature (15%), media type (21%), plant growth regulators (26%), gelling conditions (9%), and other factors (6%). The information on these abiotic factors is intended to be a practical reference and to foster the further study of the callus culture of seaweed. More studies are needed to determine how to maintain and increase callus mass in suspension culture for the industrial production of seaweed and its metabolites.

Studies have reported the impact of frying on the nutritional and sensory properties of mackerel. However, no study has reviewed this topic. This study reviewed the effects of different frying processes on the nutritional and sensory characteristics of mackerel, with and without batter, marinade, and spice. MEDLINE, Web of Science, PubMed, and ScienceDirect were used as online databases to find relevant articles. We found that the nutritional, physicochemical, and sensory properties of fried mackerel without treatment were influenced by frying methods. Deep frying affected the oxidation of lipids and degradation of proteins, while air frying increased the overall acceptance score. Frying can reduce perfluorinated compounds (PFCs), eliminate some toxins, lower the trypsin inhibitor (TI), and increase the sensory parameters of mackerel with batter, marinade, and spice treatment. The different ingredients of minced mackerel products preserved their nutritional and sensory parameters after frying. Interestingly, vacuum frying resulted in lower oxidation and maintenance of nutritional and sensory parameters of fried mackerel (with or without treatment) and minced mackerel products. Further research is needed to reveal the effectiveness of vacuum frying in maintaining the nutritional and sensory properties of fried and minced mackerel products.