It is well known that carbon present in scanning electron microscopes (SEM), Focused ion beam (FIB) systems and FIB-SEMs, causes imaging artefacts and influences the quality of TEM lamellae or structures fabricated in FIB-SEMs. The severity of such effects depends not only on the quantity of carbon present but also on its bonding state. Despite this, the presence of carbon and its bonding state is not regularly monitored in FIB-SEMs. Here we demonstrated that Secondary Electron Hyperspectral Imaging (SEHI) can be implemented in different FIB-SEMs (ThermoFisher Helios G4-CXe PFIB and Helios Nanolab G3 UC) and used to observe carbon built up/removal and bonding changes resulting from electron/ion beam exposure. As well as the ability to monitor, this study also showed the capability of Plasma FIB Xe exposure to remove carbon contamination from the surface of a Ti6246 alloy without the requirement of chemical surface treatments.

Lithium-ion batteries (LIBs) can considerably improve their lifespan by optimising operating conditions. This may entail ensuring optimal operating temperature, limiting the state-of-charge (SoC) window, reducing cycling current, and changing the physical orientation of the uncompressed LIB cell. In this study, we examine how these four conditions and some of their combinations impact degradation in both 1st life as well as in second life. The cell analysed in this investigation was the Xalt 31 HE cell, an energy-optimised Li-ion pouch cell with a capacity of 31 Ah and an NMC433-graphite chemistry. As a follow-up study of previously reported results, a total of 18 cells were investigated. We report results focusing on improving cycle life and ensuring safety before second life. The optimal conditions for first-life cycling in the full SoC window were found at room temperature, when cycled with a lower current and the cells oriented horizontally. We observed that under the same cycling conditions, a vertical alignment of cells resulted in an increased degradation rate compared to horizontal alignment. The best second-life capacity retention was found for cells initially cycled at room temperature, then later cycled with a reduced SoC window, at a lower current and in a horizontal orientation. If the cells were cycled at an elevated temperature in first life, the second-life compatibility was reduced considerably. An incremental capacity analysis (ICA) of the first-life ageing data revealed a possible indicator for ensuring safety and cycleability into second-life use.