Powder materials are used in all corners of materials science, from additive manufacturing to energy storage. Scanning electron microscopy (SEM) has developed to meet morphological, microstructural and bulk chemical powder characterization requirements. These include nanoscale elemental analysis and high-throughput morphological assays. However, spatially localized powder surface chemical information with similar resolution to secondary electron (SE) imaging is not currently available in the SEM. Recently, energy filtered (EF-) SEM has been used for surface chemical characterization by secondary electron hyperspectral imaging (SEHI). This review provides a background to existing powder characterization capabilities in the low voltage SEM provided by SE imaging, EDX analysis and BSE imaging and sets out how these capabilities could be extended for surface chemical analysis by applying SEHI to powders, with particular emphasis on air and beam sensitive powder surfaces. Information accessible by SEHI, its advantages and limitations, is set into the context of other chemical characterization methods that are commonly used for assessing powder surface chemistry such as by Auger electron spectroscopy (AES) and X-ray photoelectron spectroscopy (XPS). The applicability of existing powder preparation methods for SEM to SEHI is also reviewed. An alternative preparation method is presented alongside first examples of SEHI characterization of powder surfaces. The commercial powder materials used as examples were carbon-fiber/polyamide composite powder feedstock (CarbonMide®) used in additive manufacturing and powders consisting of lithium nickel cobalt oxide (NMC). SEHI is shown to differentiate bonding present at carbonaceous material surfaces and extract information about the work function of metal oxide surfaces. The surface sensitivity of SEHI is indicated by comparison of pristine powders to those with surface material added in preparation. A minimum spatial localization of chemical information of 55 nm was achieved in differentiating regions of NMC surface chemistry by distinct SE spectra.
Palladium films hold signicance due to their remarkable affinity for hydrogen diffusion, rendering them valauble for the seperation and purification of hydrogen in membrane reactors. However, palladium is expensive, and its films can become brittle after only a few cycles of hydrogen separation. Alloying with silver has been shown to overcome the problem of palladium embrittlement. Palladium‐silver films have been produced via several methods but all have drawbacks, such as difficulties controlling the alloy composition. This study explores two promising jet printing methods: Inkjet and Aerosoljet. Both methods offer potential advantages such as direct patterning, which reduces waste, enables thin film production, and allows for the control of alloy composition. For the first time, palladium‐silver alloys have been produced via inkjet printing using a palladium‐silver metal organic decomposition (MOD) ink, which alloys at a temperature of 300 °C with nitrogen. Similarly, this study also demonstrates a pioneering approach for Aerosol Jet printing, showing the potential of a novel room‐temperature method, for the deposition of palladium‐silver MOD inks. This low temperature approach is considered an important development as palladium‐silver MOD inks are originally designed for deposition on heated substrates.
Energy storage technologies such as lithium‐ion batteries (LIBs) incorporate carbon components key to their function. Graphite and carbon binder components in LIB electrodes are engineered to deliver critical electrical and mechanical properties, as are the surface chemistry and morphology of carbon blacks (CBs) in LIBs and catalysts. The challenge of relating surface chemistry to morphology is complicated by the numerous forms of carbon bonding and potential for surface functional groups. Furthermore, materials processing can influence bonding and structure of carbon at multiple length scales, as seen in mechanochemical functionalization of CBs. To understand the nature of carbon surfaces, secondary electron hyperspectral imaging (SEHI) is introduced as a spatially resolved analysis bridging the nano to microscale. The ability to provide novel insights is demonstrated three example applications: observation of nanoscale “satellite” particles of amorphous hydrogenated carbon on graphitic CB particles, differentiation between graphitic and amorphous hydrogenated nano‐thickness carbon coatings on particles of lithium iron phosphate, and differentiation between graphitic carbon active material and carbon binder domain in a LIB anode material. SEHI analysis using peak fitting models for graphitic and disordered carbons is developed based on reference materials and standard spectroscopic methods: Raman spectroscopy and X‐ray photoelectron spectroscopy.