An open-source tool that allows for a fast and precise analytical calculation of multi-layer planar coils self-inductance, without any geometry limitation is proposed here. The process of designing and simulating planar coils to achieve reliable results is commonly limited on accuracy and or geometry, or are too time-consuming and expensive, thus a tool to speed up this design process is desired. The model is based on Grover equations, valid for any geometry. The validation of the tool was performed through the comparison with experimental measurements, Finite Element Model (FEM) simulations, and the main analytical methods usually used in literature, with errors registered to be below , when compared to standard FEM simulations, and when compared to experimental measurements they are below in the case of the 1-layer coils, and below in the 2-layer coils (without taking into consideration the coil connectors). The proposed model offers a new approach to the calculation of the self-inductance of planar coils of several layers that combines precision, speed, independence of geometry, easy interaction, and no need for extra resources.
This paper proposes an open-source tool for a fast and precise calculation of the inductance of planar coils in the presence of conductive targets. This tool, based on Grover equations, is versatile to any coil and target geometries. The performance of this tool has been validated by comparing the analytical results with experimental data and Finite Element Model (FEM) simulations. When compared with the experimental measurements, the developed analytical model and the FEM simulation retrieved similar results, with differences below 4%. The proposed tool, in addition to requiring less computing resources, is significantly faster than FEM simulations. This shows the effectiveness of the proposed approach for the analytical calculation of the inductance of planar coils in the presence of conductive plates. It combines accuracy, versatility, speed, and no need for high computational resources.