Dario Di Santo

Dr. Dario Di Santo

orcid

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
30 June 2021 in Atmosphere
Verified
Journal Article
Open access
PDF file
CCCarlo Cintolesi
Carlo Cintolesi
DSDario Di Santo
Dario Di Santo
FBFrancesco Barbano
Francesco Barbano
SSSILVANA DI SABATINO
SILVANA DI SABATINO
Anabatic flows are common phenomena in the presence of sloping terrains, which significantly affect the dynamics and the exchange of mass and momentum in the low-atmosphere. Despite this, very few studies in the literature have tackled this topic. The present contribution addresses this gap by utilising high-resolved large-eddy simulations for investigating an anabatic flow in a simplified configuration, commonly used in laboratory experiments. The purpose is to analyse the complex thermo-fluid dynamics and the turbulent structures arising from the anabatic flow near the slope. In such a flow, three main dynamic layers are identified and reported: the conductive layer close to the surface, the convective layer where the most energetic motion develops, and the outer region, which is almost unperturbed. The analysis of instantaneous fields reveals the presence of thermal plumes, which are stable turbulent structures enhancing vertical transport and mixing of momentum and temperature. Such structures are generated by thermal instabilities in the conductive layer that trigger the rise of the plumes above them. Their evolution along the slope is described, identifying three regions responsible for the plumes generation, stabilisation, and merging. To the best of the authors’ knowledge, this is the first numerical experiment describing the along-slope behaviour of the thermal plumes in the convective layer.

27 January 2025 in Geoscientific Model Development
Verified
Journal Article
Open access
PDF file
DSDario Di Santo
Dario Di Santo
Cenlin HeCenlin He
Cenlin He
FCFei Chen
Fei Chen
LGLorenzo Giovannini
Lorenzo Giovannini
The accurate calibration of parameters in atmospheric and Earth system models is crucial for improving their performance but remains a challenge due to their inherent complexity, which is reflected in input–output relationships often characterised by multiple interactions between the parameters, thus hindering the use of simple sensitivity analysis methods. This paper introduces the Machine Learning-based Automated Multi-method Parameter Sensitivity and Importance analysis Tool (ML-AMPSIT), a new tool designed with the aim of providing a simple and flexible framework to estimate the sensitivity and importance of parameters in complex numerical weather prediction models. This tool leverages the strengths of multiple regression-based and probabilistic machine learning methods, including LASSO (see the list of abbreviations in Appendix B), support vector machine, classification and regression trees, random forest, extreme gradient boosting, Gaussian process regression, and Bayesian ridge regression. These regression algorithms are used to construct computationally inexpensive surrogate models to effectively predict the impact of input parameter variations on model output, thereby significantly reducing the computational burden of running high-fidelity models for sensitivity analysis. Moreover, the multi-method approach allows for a comparative analysis of the results. Through a detailed case study with the Weather Research and Forecasting (WRF) model coupled with the Noah-MP land surface model, ML-AMPSIT is demonstrated to efficiently predict the effects of varying the values of Noah-MP model parameters with a relatively small number of model runs by simulating a sea breeze circulation over an idealised flat domain. This paper points out how ML-AMPSIT can be an efficient tool for performing sensitivity and importance analysis for complex models, guiding the user through the different steps and allowing for a simplification and automatisation of the process.

21 May 2025
Verified
Conference Paper
Open access
GGGiulia Ravizza Garibaldi
Giulia Ravizza Garibaldi
PMPaolo Monti
Paolo Monti
ECElena Conigliaro
Elena Conigliaro
DSDario Di Santo
Dario Di Santo
LGLorenzo Giovannini
Lorenzo Giovannini
The combined effect of global climate change and rapid urban growth makes people living in cities more vulnerable to several environmental hazards such as extreme weather and climate conditions. Considering this, it is important to understand how the urban texture affects the surface energy budget to improve knowledge essential for planning strategies aiming at enhancing the livability of built environments. To this aim, a great effort has been made in the last decades to couple urban canopy models (UCMs) with numerical weather prediction (NWP) models. The need for a more accurate morphological description of urban areas has led to the development of 3D urban parametrizations such as the Three-Dimensional Urban Canopy Model (3DUCM) (Conigliaro, 2021). The latter considers the actual three-dimensional nature of the urban texture: every single building of the city is considered. 3DUCM has also been employed to investigate how buildings with different morphological characteristics and construction materials can lead to different thermal fields at the building scale. In this context, this work proposes a simplified and clear methodology to obtain the relevant urban morphological information. Starting from the shapefile of the area of interest, this procedure provides a set of specific geometrical information about each building of the urban area, including height, width, length, angle of orientation with respect to the North direction and centroids coordinates. In addition, a unit composed of each building and the nearest ones in a delimited area (one to the East and one to the North) is created. To each of these units a Local Climate Zone (Oke, 2012) is associated, assigning, for each building, standardized values of geometrical and surface cover, thermal and radiative properties. This set of information, used as input values for UCMs in NWP models, can contribute to the improvement of the accuracy of surface energy budget simulations.

2 May 2026 in Journal of Geophysical Research: Atmospheres
Verified
Journal Article
Open access
DSDario Di Santo
Dario Di Santo
Cenlin HeCenlin He
Cenlin He
FCFei Chen
Fei Chen
AZAndrea Zonato
Andrea Zonato
LGLorenzo Giovannini
Lorenzo Giovannini
This study investigates the sensitivity of numerical simulations of atmospheric processes over complex terrain to land surface model (LSM) parameters, focusing on thermally driven circulations in an idealized valley. The sensitivity analysis is performed using the Weather Research and Forecasting model coupled with the Noah‐MP LSM, for forest and grassland land cover classes. An ensemble of 400 simulations for mixed forest and grassland is emulated with a suite of machine‐learning regressors, and variance‐based global sensitivity indices are computed from the surrogates. Sensitivity is evaluated for near‐surface wind, potential temperature, turbulent kinetic energy (TKE), and surface heat fluxes at representative valley locations. Results clearly discriminate influential and non‐influential parameters, providing guidance in identifying those that most affect model results and therefore should be treated with the most care. Over forests, stomatal minimum resistance ( RS ) is the most influential parameter overall, followed by canopy height ( HVT ), with importances intensifying during the night. Near‐infrared leaf reflectivity ( RHOL_NIR ), leaf area index, and optimal transpiration temperature ( TOPT ) also result as important parameters. Over grasslands, by contrast, both leaf and stem ( SAI ) area indices dominate, followed by RHOL_NIR . The roughness length ( Z0MVT ) is the most important parameter affecting turbulent kinetic energy during daytime, while RS and HVT are largely non‐influential. The results highlight that the proposed approach, integrating variance‐based global sensitivity analysis with machine learning, represents a reliable framework to perform sensitivity analyses for complex numerical models, providing valuable insights into the dynamic interactions between land surface parameters and atmospheric conditions over complex terrain.

27 March 2022
Verified
Conference Paper
Open access
LGLorenzo Giovannini
Lorenzo Giovannini
AZAndrea Zonato
Andrea Zonato
DSDario Di Santo
Dario Di Santo
andrea bisignanoandrea bisignano
andrea bisignano
DZDino Zardi
Dino Zardi
This contribution aims at presenting results from the project “Atmospheric boundary-layer modeling over complex terrain”, a collaboration between the University of Trento, the University of Bolzano and the University of Innsbruck with the objective to evaluate the performance of turbulence and land surface parameterizations over mountainous terrain and to identify potential issues that have a large impact on model results and consequently on the quality of weather forecasts.A set of Reynolds-averaged Navier-Stokes (RANS) simulations at 1 km horizontal resolution is performed in an idealized three-dimensional valley-plain topography, using typical geometrical features of a north-south Alpine valley, with ridges up to 1500 m above the valley floor and a distance of 20 km from crest to crest. Simulations are initialized with a linear and stable vertical profile of potential temperature, dry air and an atmosphere at rest. The aim of the modeling experiment is to evaluate the sensitivity of model results to planetary boundary layer (PBL) parameterizations, exploring the performance of the PBL schemes implemented in the Weather Research and Forecasting (WRF) model, including a newly developed k-ε closure. Results from the RANS simulations are compared against a large-eddy simulation (LES) with a resolution of 100 m, which is taken as the benchmark. A full diurnal cycle has been considered for the evaluation of numerical results, focusing on the development of along- and cross-valley thermally-driven circulations and on the associated thermal field both in the nighttime and in the daytime phases. The sensitivity of model results to the change of the PBL scheme is assessed using as key metrics the strength and the timing of the thermally-driven circulations, as well as the vertical profiles of mean and turbulent quantities, when available. Results show that in most cases there is a good agreement between RANS simulations and the LES considering the main features of both along- and cross-valley circulations and the diurnal evolution of the thermal stratification. In particular, the intensity of the along-valley wind is generally well-reproduced by all the RANS simulations, while higher discrepancies are found for the timing of the evening transition. On the other hand, RANS simulations are in good agreement with the LES considering the timing of slope winds, whereas the simulation of their intensity presents much more variability, especially during nighttime.

27 March 2022
Verified
Conference Paper
Open access
DSDario Di Santo
Dario Di Santo
AZAndrea Zonato
Andrea Zonato
LGLorenzo Giovannini
Lorenzo Giovannini
Land surface models (LSMs), i.e. parameterization schemes for evaluating surface-atmosphere exchange implemented in meteorological models, usually prove inadequate over complex terrain,where orography strongly influences atmospheric processes and their interaction with the surface. In particular, LSMs use several parameters to suitably describe the surface and its interaction with the atmosphere, whose determination is often affected by many uncertainties. To this date, the sensitivity of meteorological model results to these parameters has not yet been studied systematically in complex terrain.The purpose of this work, which lies in the context of the TEAMx-related project ASTER, funded by the EGTC European Region Tyrol-South Tyrol-Trentino, is to evaluate the sensitivity of simulations with the Weather Research and Forecasting (WRF) meteorological model to variation of parameters describing land cover. Specifically, an idealized three-dimensional topography consisting of a valley-plain system is adopted and the analysis of the results focuses on the development of thermally-driven circulations. The analysis considers both the sensitivity to the type of vegetation cover and to the systematic variation of surface parameters based on typical values found in the literature. In particular, this analysis is carried out using the Global Sensitivity Analysis (GSA) methodology in order to quantify the uncertainty associated with the variation of each parameter evaluated and to estimate the optimal computational effort required for this type of study. The outcome of this analysis allows to evaluate which are the parameters that most influence model results and therefore should be estimated with particular attention in order to obtain reliable simulations over complex terrain.