A unified viscoplastic constitutive model based on internal physical variables was proposed to predict the viscoplastic mechanical behavior and microstructure evolution of metals during hot forging. Based on the phase transformation theory of materials under the effect of temperature, the evolution mechanism of residual stress during the cooling process after hot forging and stamping was explored. The determined unified viscoplastic constitutive equation was written in the VUMAT subroutine and employed for the explicit FE analysis of the hot forging and stamping process of thin-walled spherical shells. In the data transfer process, the stress field, temperature field, and deformation characteristics calculated during the high-temperature transient of the hot forging and stamping process were inherited. Meanwhile, the thermoplastic constitutive equation considering the influence of phase transformation was written in the UMAT subroutine and utilized for the implicit FE analysis of the cooling process of thin-walled spherical shells. Through comparison with the measured stress results of the spherical shells after actual forging, it was shown that the proposed constitutive model can effectively predict the microstructural evolution and the final residual stress distribution pattern of medium-carbon steel during the hot forging process.
12 March 2024 in Journal of Manufacturing Science and Engineering
Fly cutting is widely used in manufacturing of large-scale, high-precision optical components. However, the discontinuity of fly cutting machining leads to significant relative vibrations between the tool and the workpiece. The cutting process generates periodic waves along the cutting direction, which will deteriorate the wavefront characteristics of optical components. Based on the machining dynamics, this paper proposes a direct integration method to predict the waviness error of the machined surface. The cutting force model of fly cutting is established. The multi-mode characteristics of the spindle-tool system are measured by the experimental method. Then, the influence of uncertainties on the calculation results is analyzed by the variance-based sensitivity analysis method. Finally, the plane cutting experiment verifies that the direct integration method effectively predicts the waviness error and its variation trend, and the waviness prediction research is important for optimization of the machining parameters.