The medium-frequency error on the surface of ultraprecision flycutting has an important effect on the performance of the optical crystal. In this paper, firstly, the characteristic phenomenon of “knife-like grain” in the medium frequency surface of the square and circular optical crystal machined by ultraprecision fly-cutting is revealed. Besides, the error traceability is realized and the results show that the periodic low-frequency fluctuation of 0.3 Hz between the tool tip and the workpiece is the cause of the medium frequency error of “knife-like grain”. Secondly, through the frequency domain waterfall diagram of vibration signal and the analysis of spindle speed signal, it is proved that the surface shape characteristic is caused by the fluctuation of spindle speed during the cutting process. Then, the variation rule of the cutting amount caused by the fluctuation of spindle speed is explored theoretically and experimentally, and the formation mechanism of medium frequency error in flycutting is revealed. Finally, in order to reduce the medium frequency error of “knife-like grain”, the control parameters of the aerostatic spindle are reasonably optimized based on the analysis of the mechanical and electrical coupling control performance of the spindle, so that the RMS values in the medium frequency band of the workpiece are greatly improved after machining.
Laser powder bed fusion (LPBF) technology offers an effective approach for fabricating high-performance superelastic NiTi alloys. This study achieved Ni51.9Ti48.1 alloys with outstanding superelastic properties through a triple optimization design of the initial powder composition, printing process parameters, and post-processing. The phase transformation behavior and microstructure of the alloys were systematically investigated. The results indicate that as energy density increases, the size and quantity of pore defects in LPBF-fabricated Ni51.9Ti48.1 alloys increase, phase transformation temperatures rise, and hardness conversely decreases. Ni51.9Ti48.1 alloys produced at lower energy densities exhibit fewer dislocations. After annealing at 600 °C, Ni4Ti3 and R phases form internally, resulting in a maximum superelasticity of 6.64%. Conversely, Ni51.9Ti48.1 alloys produced at higher energy densities exhibited a large number of dislocations and formed subgrains after annealing at 600 °C. Additionally, due to the high void volume fraction, they demonstrated deteriorated superelasticity.
The application range of potassium dihydrogen phosphate (KDP) crystals can be expanded by enhancing their surface quality properties. Therefore, a method for controlling the surface-temperature field of various materials was developed to expand the plastic zone to overcome the difficulty in processing KDP crystals. The ductile/brittle transition depth of the KDP crystals was determined using a 38 nm nanoindentation experiment. The nanoscratch experiment revealed the rules of how the transformation depth of the KDP crystals changes with temperatures, and the effect of temperature on the microstructure of the KDP crystals was studied. Finally, KDP crystal surfaces were processed using a UPDFC machine at elevated temperatures. According to our experiments, the surface roughness of the KDP crystal reached 5.275 nm as temperature increased, thus enhancing its surface quality. This method could be applied to other brittle materials.
4 December 2025 in The International Journal of Advanced Manufacturing Technology
A unified viscoplastic constitutive model based on internal physical variables was proposed to predict the viscoplastic mechanical behavior and microstructure evolution of metals during hot forging. Based on the phase transformation theory of materials under the effect of temperature, the evolution mechanism of residual stress during the cooling process after hot forging and stamping was explored. The determined unified viscoplastic constitutive equation was written in the VUMAT subroutine and employed for the explicit FE analysis of the hot forging and stamping process of thin-walled spherical shells. In the data transfer process, the stress field, temperature field, and deformation characteristics calculated during the high-temperature transient of the hot forging and stamping process were inherited. Meanwhile, the thermoplastic constitutive equation considering the influence of phase transformation was written in the UMAT subroutine and utilized for the implicit FE analysis of the cooling process of thin-walled spherical shells. Through comparison with the measured stress results of the spherical shells after actual forging, it was shown that the proposed constitutive model can effectively predict the microstructural evolution and the final residual stress distribution pattern of medium-carbon steel during the hot forging process.