Porosity is an important parameter for characterizing the microstructure of solids that corresponds to the volume of the void space, which may contain fluid or air, over the total volume of the material. Many materials of natural and technically manufactured origin have a large number of voids in their internal structure, relatively small in size, compared to the characteristic dimensions of the body itself. Thus, porosity is an important feature of industrial materials, but also of biological ones. The porous structure affects a number of material properties, such as sorption capacity, as well as mechanical, thermal, and electrical properties. Porosity of materials is an important factor in research on biomaterials. The most popular materials used to rebuild damaged tooth tissues are composites and ceramics, whilst titanium alloys are used in the production of implants that replace the tooth root. Research indicates that the most comprehensive approach to examining such materials should involve an analysis using several complementary methods covering the widest possible range of pore sizes. In addition to the constantly observed increase in the resolution capabilities of devices, the development of computational models and algorithms improving the quality of the measurement signal remains a big challenge.

Enamel, dentin and cementum apatite has a complex composition. The lack of complete reports on the chemical composition of all tooth tissues together and the need to create a modern biomaterial that reproduces the correct ratio of individual tooth mineral components prompted the authors to undertake the research. A detailed evaluation of the micro- and macro-elements of tooth powder, using various methods of chemical analysis was conducted. All four groups of human sound teeth were crushed using the grinder. A fine powder was implemented for the FTIR (Fourier Transform Infrared Spectroscopy), ICP (Inductively Coupled Plasma Optical Emission Spectometry) and for the potentiometric titration, SEM and mercury porosimetry analyses. The obtained studies indicate that there is no significant correlation in chemical composition between the different teeth types. This proves that every removed, crushed tooth free of microorganisms can be a suitable material for alveolar augmentation. It is essential to know the chemical profiles of different elements in teeth to develop a new class of biomaterials for clinical applications.

The aim of this work was to investigate selected biological and toxicity properties of cured epoxy resin-based compounds based on a bisphenol A epoxy resin, cold-cured by a polyamide and containing two types of metal powders (aluminum and copper). This study involved cytotoxicity analysis, pH measurements, absorbance measurements and sterilization. The cytotoxicity analysis was conducted to determine the harmful degree of the cured epoxy resin. Aimed at identifying toxic agents in cured compounds, the cytotoxicity analysis involved absorbance measurements in an entire wavelength range. Cytotoxicity and absorbance results demonstrated that the extracts of all the tested resin samples had no cytotoxic effects on the cells of living organisms. The absorbance values obtained over the entire wavelength range did not point to the formation of aggregations, which proved that no toxic agents harmful to living organisms were extracted from the resin samples. Based on the results obtained, it can be concluded that all tested compounds, based on epoxy resins, which are also used as adhesives in various applications, are essentially safe materials when using such formulations in a cured state.

This paper presents a detailed analysis to directly compare the morphology and chemistry of human tooth layers using advanced scanning electron microscopy (SEM) techniques together with supporting data from energy dispersive spectroscopy (EDS) measurements. The aim of this study was to visualise and evaluate the structural and microanalytical differences of the mineralised hard tissues of human teeth. The extracted sound teeth without any pathologies were divided into the following groups: incisors, canines, premolars, and molars. Tooth samples were broken vertically to preserve the primary structures and to visualise individual tooth tissues. Specimens were also used to find variations in the elemental composition of tissues for different tooth groups. The average thickness of the enamel in the tooth groups studied was 1.1 mm and the average width of the enamel prisms was 4.2 µm, with the highest values observed for molars. The analysis of the chemical composition of the enamel showed that Ca and P were among the predominant elements. The average dentine thickness was 1.87 mm, with the highest values determined for molars, and the lowest for canines. The width of the dentinal tubules was less than 2 µm, for molars being significantly smaller. The analysis of the chemical composition of the dentine showed the highest O content of the all tooth tissues analyzed, while a lower P and Ca content was observed compared to the enamel. The cementum thickness averaged 0.14 mm, with the highest values observed for molars and the lowest for incisors. The analysis of the chemical composition of the cementum showed the lowest average O and P content, and the highest average C and N content, compared to the enamel and the dentine. Increasingly accurate imaging and analysis of dental hard tissue structures provides the opportunity for multifactorial evaluation in terms of their clinical application.

The dentin-enamel junction (DEJ) is known for its special role in teeth. Several techniques were applied for the investigation of the DEJ in human sound molar teeth. The electron (EPMA) and proton (PIXE) microprobes gave consistent indications about the variability of elemental concentrations on this boundary. The locally increased and oscillating concentrations of Mg and Na were observed in the junction, in the layer adhering to the enamel and covering roughly half of the DEJ width. The chemical results were compared with the optical profiles of the junction. Our chemical and optical results were next compared with the micromechanical results (hardness, elastic modulus, friction coefficient) available in the world literature. A strong correlation of both result sets was proven, which testifies to the self-affinity of the junction structures for different locations and even for different kinds of teeth and techniques applied for studies. Energetic changes in tooth strictly connected with crystallographic transformations were calculated, and the minimum energetic status was discovered for DEJ zone. Modeling of both walls of the DEJ from optical data was demonstrated. Comparing the DEJ in human teeth with the same structure found in dinosaur, shark, and alligator teeth evidences the universality of dentin enamel junction in animal world. The paper makes a contribution to better understanding the joining of the different hard tissues.

The oral cavity has a specific microenvironment, and structures such as teeth are constantly exposed to chemical and biological factors. Although the structure of the teeth is permanent, due to exposure of the pulp and root canal system, trauma can have severe consequences and cause the development of local inflammation caused by external and opportunistic pathogens. Long-term inflammation can affect not only the local pulp and periodontal tissues but also the functioning of the immune system, which can trigger a systemic reaction. This literature review presents the current knowledge on root canal infections and their impact on the oral microenvironment in the context of immune system disorders in selected diseases. The result of the analysis of the literature is the statement that periodontal-disease-caused inflammation in the oral cavity may affect the development and progression of autoimmune diseases such as rheumatoid arthritis, systemic lupus erythematosus, or Sjogren’s syndrome, as well as affecting the faster progression of conditions in which inflammation occurs such as, among others, chronic kidney disease or inflammatory bowel disease.