In this article, we present a system to measure current in the range of 0 to 10 $\mathsf{\mu }$A with high-voltage isolation up to 5 kV. This current monitor consists of three ammeters connected in series, to improve the resolution in the measurement. The design features several innovative elements such as using low voltage to provide power to the devices to measure the current and digitize it with a sampling frequency of 1 KHz, it is generated based on a DC-DC converter that produces three voltages, +12 V, −12 V, and 5 V, from a conventional 10 V source. The three voltages are referenced to the same floating ground. The DC-DC converter has a high voltage insulation up to 5 kV and four optocouplers with an insulation up to 20 kV are used to read the digitized data. The introduction of a DC-DC converter contributed to reduce the noise level in the analog part of the circuit which has been resolved implementing shields inside the board. In particle physics, several systems are used to detect particles in high-energy physics experiments such as Gas Electron Multiplier (GEM), micromegas, etc. GEMs suffer small deteriorations due to discharges in constant operation and require monitoring the current consumption at high frequency (1 kHz). In this work, we present the design and operation of a 0 to 10 $\mathsf{\mu }$A auto scale ammeter. The results obtained by monitoring the current in a 10 × 10 cm${}^2$ GEM are shown.

The sphericity distribution in minimum bias events obtained with PYTHIA event generator, incorporating different parton distribution functions is presented. The results show that for minimum bias pp collisions the sphericity distribution for different parameters like the mean transverse momentum and multiplicity exhibit strong sensitivity on the parton distribution function used. The results indicate that early data at the LHC could be used in this type of analysis to fix the gluon distribution function in the proton.

A simple afterburner including radial flow to the randomized transverse momentum obtained from event generators, Pythia and Hijing, has been implemented to calculate the $p/\pi$ ratios and compare them with available data. A coherent trend of qualitative agreement has been obtained in $pp$ collisions and in $Au+Au$ for various centralities. Those results indicate that the radial flow does play an important role in the so called baryon puzzle anomaly.