A comprehensive review concerning the geometry, the manufacturing technologies, the materials, and the numerical techniques, adopted for the analysis and design of wideband and ultrawideband (UWB) antennas for wireless applications, is presented. Planar, printed, dielectric, and wearable antennas, achievable on laminate (rigid and flexible), and textile dielectric substrates are taken into account. The performances of small, low-profile, and dielectric resonator antennas are illustrated paying particular attention to the application areas concerning portable devices (mobile phones, tablets, glasses, laptops, wearable computers, etc.) and radio base stations. This information provides a guidance to the selection of the different antenna geometries in terms of bandwidth, gain, field polarization, time-domain response, dimensions, and materials useful for their realization and integration in modern communication systems.

A novel high-gain dielectric resonator antenna (DRA), featuring a peak realized gain of 11.3 dBi over a fractional bandwidth of 16.6% around 30 GHz, is presented. The proposed antenna structure, excited by a slot coupled microstrip line, is composed of a cylindrical dielectric resonator and of a truncated plastic-based conical horn useful to enhance the gain. An annular perturbation notch is realized in the dielectric horn to achieve a better focusing of the RF energy along the antenna boresight direction, while reducing the side-lobe levels (SSLs). The presented antenna design achieves SSLs below -10 dB for both the E- and H-plane so to meet the requirements of next-generation 5G wireless communication protocols and of low-cost satellite and mobile systems.

Compact high-gain wideband antenna systems for through-the-wall imaging and wireless communications, featuring 160% fractional bandwidth, are presented. Each radiating system, consisting of two orthogonal Vivaldi antennas forming a cross-shaped configuration so to excite linear (horizontal/vertical) and circular polarization (CP), is equipped with a top-mount spherical-axicon dielectric lens. The optimized shaping of the lens and of the outer edge Vivaldi arms allow achieving gain levels exceeding 15dBi with good front-to-back-ratio. The proposed antenna features a broadside gain diagram with stable radiation pattern and wideband impedance matching in the frequency range between 650 MHz and 6 GHz. CST Microwave Studio®, implementing a full-wave locally conformal finite integration technique (FIT), was employed to design and characterize the antenna and to guide its physical realization. Two-port equivalent circuits were developed to characterize parasitic coupling effects between the Vivaldi antennas ports, while a full-wave analysis allowed characterizing their frequency and time domain behaviors. The numerical results concerning the antennas parameters, illustrating the suitability of the proposed antennas to support narrow and ultra-wideband signal waveforms, are found to be in good agreement with the experimental measurements performed on an antenna prototype.

Microwave imaging is an active area of research that has garnered interest over the past few years. The main desired improvements to microwave imaging are related to the performances of radiating systems and identification algorithms. To achieve these improvements, antennas suitable to guarantee demanding requirements are needed. In particular, they must operate in close proximity to the objects under examination, ensure an adequate bandwidth, as well as reduced dimensions and low production costs. In addition, in near-field microwave imaging systems, the antenna should provide an ultra-wideband (UWB) response. Given the relevance of the foreseen applications, many UWB antenna designs for microwave imaging applications have been proposed in the literature. In this paper, a comprehensive review of different UWB antenna designs for near-field microwave imaging is presented. The antennas are classified according to the manufacturing technology and radiative performances. Particular attention is also paid to the radiation mechanisms as well as the techniques used to reduce the size and improve the bandwidth.

A high-gain mushroom-shaped dielectric resonator (DR) antenna for wideband wireless applications, featuring 65% fractional bandwidth, is proposed. The antenna consists of a low-permittivity hollow cylindrical DR provided with a top-mount spherical cap lens and a metal reflector, excited by means of coaxial probes. Suitable shaping of lens and reflector yields high gain (exceeding 14 dBi) and limited back radiation. The proposed antenna features a broadside radiation diagram with stable radiation patterns and wideband impedance matching. Its potential applications include access points for indoor/outdoor wireless multimedia systems as well as satellite terminal receivers. CST Microwave Studio, implementing a full-wave locally conformal finite integration technique, is employed to design and characterize the antenna, while the singularity expansion method is adopted to express the antenna response to arbitrary excitation waveforms. The numerical results concerning the antenna parameters are found to be in good agreement with the experimental measurements performed on an antenna prototype.

A fast low-cost through-the-wall radar imaging (TWRI) system, based on a vector network analyzer (VNA), a couple of switches and an array of Vivaldi antennas, has been designed, realized, and tested. To solve the TWRI inversion problem, an original theoretical modeling for a class of TWRI techniques whose basic functions are the cross-range Fourier transform (FT) of the scattered field and its covariance operator has been proposed. Using these functions, four conventional algorithms, namely the delay and sum (DAS), the FT, the multiple signal classification (MUSIC), the hybrid DAS-MUSIC and a new algorithm, the hybrid FT-MUSIC, have been derived. All these techniques have been implemented and their accuracy and field of view have been tested on canonical scatterers. Then, the algorithms have been applied to measured data collected in different scenarios constituted by a metallic bar or a human subject in the absence and in the presence of a wall between the antenna and the considered targets. Using the proposed TWRI system, it has been possible to detect a subject located up to 5-m away from the radar antenna array through a tuff wall. The proposed FT-MUSIC algorithm has evidenced performances similar to those of the DAS-MUSIC but with significantly lower execution times. Finally, FT-MUSIC performances in terms of field of view and immunity to disturbances are better compared to those of the MUSIC algorithm.