In this work, we report on solution-based p-i-n-type planar-structured CH₃NH₃PbI₃perovskite photovoltaic (PV) cells, in which precrystallized NiO nanoparticles (NPs) without post-treatment are used to form a hole transport layer (HTL). X-ray diffraction and high-resolution transmission electron microscopy showed the crystallinity of the NPs, and atomic force microscopy and scanning electron microscopy confirmed the uniform surfaces of the resultant NiO thin film and the subsequent perovskite photoactive layer. Compared to the conventional poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) HTL, the NiO HTL had excellent energy-level alignment with that of CH₃NH₃PbI₃and improved electron-blocking capability, as analyzed by photoelectron spectroscopy and diode modeling, resulting inV_oc~0.13 V higher than conventional PEDOT:PSS-based devices. Consequently, a power conversion efficiency (PCE) of 15.4% with a high fill factor (FF, 0.74), short-circuit current density (J_sc, 20.2 mA·cm⁻²), and open circuit voltage (V_oc, 1.04 V) having negligible hysteresis and superior air stability has been achieved.

We demonstrate carbon nanotube (CNT) composite-based optoacoustic transmitters that generate strong and high frequency ultrasound. The composite consists of CNTs grown on a substrate, which are embedded in elastomeric polymer used as an acoustic transfer medium. Under pulsed laser excitation, the composite generates very strong optoacoustic pressure: 18 times stronger than a Cr film reference and five times stronger than a gold nanoparticle composite with the same polymer. This enhancement persists over a broadband frequency range of up to 120 MHz and is confirmed by calculation. We suggest the CNT-polymer composites as highly efficient optoacoustic transmitters for high resolution ultrasound imaging.