Noah Thibodeaux

Mr. Noah Thibodeaux


Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
18 October 2021 in Fibers
Verified
Journal Article
Open access
PDF file
NTNoah Thibodeaux
Noah Thibodeaux
DGDaniel Guerrero
Daniel Guerrero
JLJose Lopez
Jose Lopez
MBMatthew J. Bandelt
Matthew J. Bandelt
MAMatthew Adams
Matthew Adams
Fiber-reinforced cementitious composites (FRCC) are a class of materials made by adding randomly distributed fibers to a cementitious matrix, providing better material toughness through the crack bridging behavior of the fibers. One of the primary concerns with FRCCs is the behavior of the fiber when a crack is formed. The fibers provide a stress-bridging mechanism, which is largely determined by the bond that exists between the concrete and the fiber’s outer surface. While many studies have determined the properties of FRCCs and potential benefits of using specific fiber types, the effects of low temperature or cold plasma treatment of polymer fibers on the mechanical behavior of the composite material are limited. Polymer fibers are notable for their low density, ductility, ease of manufacture, and cost-effectiveness. Despite these advantages, the surface properties of polymers do not enable the bonding potential given by steel or glass fibers when used in untreated FRCC, resulting in pull-out failures before the full displacement capacity of the fiber is utilized. For this reason, modification of the surface characteristics of polymer fibers can aid in higher bonding potential. Plasma treatment is a process wherein surfaces are modified through the kinetics of electrically charged and reactive species in a gaseous discharge environment. This paper is a preliminary study on the use of atmospheric pressure plasma generated at approximately room temperature. This atmospheric, cold plasma treatment is a method for improving the mechanical properties of FRCC using polymeric fibers. In this study, polypropylene and polyvinyl-alcohol fibers were cold plasma treated for 0, 30, 60, and 120 s before being used in cementitious mortar mixtures. Compression and flexure tests were performed using a displacement-based loading protocol to examine the impact of plasma treatment time on the corresponding mechanical performance of the fiber-reinforced cementitious composite. The experimental results obtained from this study indicate that there is a positive correlation between fiber treatment time and post-peak load-carrying capacity, especially for specimens subjected to flexural loading.

22 January 2025 in Construction Materials
Verified
Journal Article
Open access
PDF file
NTNoah Thibodeaux
Noah Thibodeaux
MHMd Maruf Hasan
Md Maruf Hasan
MBMatthew J. Bandelt
Matthew J. Bandelt
MAMatthew Adams
Matthew Adams
Rapid repair materials (RRMs) have been used in concrete overlay systems to rehabilitate infrastructure for many years. The bond performance between RRMs and a concrete substrate is crucial for maintaining the desired performance and can deteriorate due to freeze–thaw action. In the case of partial depth repairs (PDRs), the mechanical and durability properties at the interface between the substrate and repair materials have not been thoroughly studied resulting in frequent failures. There is limited research on the freeze–thaw durability of RRM overlay–substrate interface, and no standardized test methods exist for evaluating the performance under freeze–thaw cycling. The proposed experimental procedure combines freeze–thaw cycling of an overlay–substrate specimen with pull-off testing of the overlay. Three RRM overlay systems were used consisting of calcium sulfoaluminate cement and ordinary Portland cement (PC), and a ternary blend of PC, calcium aluminate cement, and calcium sulfate cement. A correlation between tensile bond strength and fundamental transverse frequency in composite specimens was observed, and the results demonstrated that RRMs can maintain robust adhesion following 300 cycles of freeze–thaw exposure. Furthermore, the employed testing methodology elicited bond-only failures, underscoring the necessity for continued investigation into optimal conditioning intervals and substrate integrity to enhance the durability of repair systems.