In order to solve the problem of difficulties in pavement distress detection in the field of pavement maintenance, a pavement distress detection algorithm based on a new deep learning method is proposed. Firstly, an image data set of pavement distress is constructed, including large-scale image acquisition, expansion and distress labeling; secondly, the FReLU structure is used to replace the leaky ReLU activation function to improve the ability of two-dimensional spatial feature capture; finally, in order to improve the detection ability of this model for long strip pavement distress, the strip pooling method is used to replace the maximum pooling method commonly used in the existing network, and a new method is formed which integrates the FReLU structure and the strip pooling method, named FS-Net in this paper. The results show that the average accuracy of the proposed method is 4.96% and 3.67% higher than that of the faster R-CNN and YOLOv3 networks, respectively. The detection speed of 4 K images can reach about 12 FPS. The accuracy and computational efficiency can meet the actual needs in the field of road detection. A set of lightweight detection equipment for highway pavement was formed in this paper by purchasing hardware, developing software, designing brackets and packaging shells, and the FS-Net was burned into the equipment. The recognition rate of pavement distress is more than 90%, and the measurement error of the crack width is within ±0.5 mm through application testing. The lightweight detection equipment for highway pavement with burning of the pavement distress detection algorithm based on FS-Net can detect pavement conditions quickly and identify the distress and calculate the distress parameters, which provide a large amount of data support for the pavement maintenance department to make maintenance decisions.
An outstanding calibration algorithm is the most important factor that affects the precision of attitude measurement. This study proposes a non‐linear optimisation algorithm to refine the solutions of the initial guess obtained using the Zhang's technique, the Bouget's technique, or the Hartley's algorithm. Large sets of point correspondences were adopted to test the validity of the proposed method. Extensive practical experiments demonstrated that the proposed method can significantly improve the accuracy of calibration and ultimately obtains higher measurement precision. The error of the reprojection in the proposed method was <0.13 px. At a range of 1 m, the error rate was 0.5% for the length test and about 3% for the angle test. This study proposes a new method to calibrate the relationship between laser radar and the camera. Binocular vision was used to reconstruct the point cloud of the non‐cooperative target. At the same time, data was also obtained using laser radar. Finally, the two groups of systems were fused. Accurate and dense three‐dimensional information of the target was obtained. It could not only obtain the dense pose information of the target surface but also the texture and colour feature information of the target surface.
The precision of the camera calibration is one of the key factors that affect attitude measurement accuracy in many computer vision tasks. This study proposes a new calibration approach for binocular cameras. Firstly, based on singular value decomposition, the best transformation matrix to the essential matrix is approximated as the initial guess, which is solved in using the Frobenius norm. Secondly, the initial guess is refined through maximum likelihood estimation. A new calculating expression is derived for computing the relative position matrix of the binocular cameras. The Levenberg–Marquardt algorithm is then implemented to refine the initial guess. Large sets of synthesised and real point correspondences were tested to demonstrate the validity of the proposed method. Extensive experiments demonstrated that the proposed method outperforms the state‐of‐the‐art methods. The error rate of the proposed method was 0.5% for the length test and about 1% for the angle test at a range of 1 m. This method can advance three‐dimensional (3D) computer vision one additional step from laboratory environments to real‐world use.
Non‐rigid point set registration is a key component in many computer vision and pattern recognition tasks. In this study, the authors propose a robust non‐rigid point set registration method based on high‐dimensional representation. Their central idea is to map the point sets into a high‐dimensional space by integrating the relative structure information into the coordinates of points. On the one hand, the point set registration is formulated as the estimation of a mixture of densities in high‐dimensional space. On the other hand, the relative distances are used to compute the local features which assign the membership probabilities of the mixture model. The proposed model captures discriminative relative information and enables to preserve both global and local structures of the point set during matching. Extensive experiments on both synthesised and real data demonstrate that the proposed method outperforms the state‐of‐the‐art methods under various types of distortions, especially for the deformation and rotation degradations.
With the rapid advancement of medical imaging technology, medical image segmentation has become increasingly crucial in disease diagnosis, treatment planning, and intraoperative navigation. In this paper, we propose a novel convolutional module, AdaptiveConv2d, that is designed to address the limitations of traditional convolutions and advance convolutional techniques in medical image processing. This approach targets the unique challenges associated with medical images, including complex tissue structures, irregular boundaries, low contrast, and high noise levels. The AdaptiveConv2d module integrates adaptive feature extraction, an optimized receptive field, enhanced sensitivity to details and boundaries, and an innovative feature fusion mechanism to significantly improve segmentation accuracy and robustness. By dynamically adjusting the convolution operations, the module adapts flexibly to medical images with varying shapes and boundaries, leading to more precise feature extraction. Experimental results indicate that the AdaptiveConv2d module outperforms several existing methods across multiple medical image segmentation tasks, highlighting its potential as an effective tool for medical image analysis. Furthermore, the highly modular design of AdaptiveConv2d allows for seamless integration into existing neural network architectures, offering a versatile and adaptable solution for a range of medical image segmentation applications.
30 June 2022 in Mathematical Problems in Engineering
Accurate three-dimensional measurement of potholes is a significant concern in road maintenance. However, the assessment of road potholes still relies heavily on human inspectors to make maintenance suggestions. To realize full-field measurement of pavement pothole automatically, a high-precision volume measurement method based on second-order Taylor expansion is proposed, where the second-order Taylor estimation of each point is converted into a convolution operation. On the one hand, this method discards the second-order fitting of the surface, which greatly reduces the computational complexity. On the contrary, the second-order Taylor estimation is not restricted by the surface shape because it only depends on the distribution of the adjacent points. Experiments on synthesized and real point sets demonstrate that the proposed method outperforms the state-of-the-art methods under various point cloud shapes.