This research aims to improve the durability of skid resistance of asphalt pavement from the perspective of coarse aggregates based on on-site investigation. Firstly, the skid resistance of six representative actual roads was tested during two years by employing the Dynamic Friction Tester and the attenuation characteristics of skid resistance of different types of asphalt pavements were analyzed. Secondly, core samples were drilled onsite and coarse aggregates were extracted from the surface layer of the core samples. The morphological parameters of coarse aggregates were collected by a “backlighting photography” system and three-dimensional profilometer, and the variation rules of angularity and micro-texture of coarse aggregates were investigated. Finally, the correlation between the morphological characteristics of coarse aggregates and the pavement skid resistance was established based on the grey correlation entropy. The research results show that with the increase in service time, the attenuation rate of skid resistance of asphalt pavement gradually slows down; the angularity of coarse aggregates gradually decreases, and the micro-texture on the wearing surface gradually wears away. The grey correlation entropy between all the micro-texture indexes of coarse aggregates and dynamic friction coefficient, as well as between the roundness and skid resistance is more than 0.7, whereas the correlation between other evaluation indicators and the dynamic friction coefficient is poor, indicating that compared with the angularity of coarse aggregates, the micro-texture affects the skid resistance of actual asphalt pavement more greatly. In engineering applications, the use of coarse gradation, coarse aggregates with high roughness or high anti-wear performance can slow down the attenuation of pavement skid resistance, so that the pavement can maintain superior long-term anti-skidding performance.
In order to solve the problem of difficulties in pavement distress detection in the field of pavement maintenance, a pavement distress detection algorithm based on a new deep learning method is proposed. Firstly, an image data set of pavement distress is constructed, including large-scale image acquisition, expansion and distress labeling; secondly, the FReLU structure is used to replace the leaky ReLU activation function to improve the ability of two-dimensional spatial feature capture; finally, in order to improve the detection ability of this model for long strip pavement distress, the strip pooling method is used to replace the maximum pooling method commonly used in the existing network, and a new method is formed which integrates the FReLU structure and the strip pooling method, named FS-Net in this paper. The results show that the average accuracy of the proposed method is 4.96% and 3.67% higher than that of the faster R-CNN and YOLOv3 networks, respectively. The detection speed of 4 K images can reach about 12 FPS. The accuracy and computational efficiency can meet the actual needs in the field of road detection. A set of lightweight detection equipment for highway pavement was formed in this paper by purchasing hardware, developing software, designing brackets and packaging shells, and the FS-Net was burned into the equipment. The recognition rate of pavement distress is more than 90%, and the measurement error of the crack width is within ±0.5 mm through application testing. The lightweight detection equipment for highway pavement with burning of the pavement distress detection algorithm based on FS-Net can detect pavement conditions quickly and identify the distress and calculate the distress parameters, which provide a large amount of data support for the pavement maintenance department to make maintenance decisions.
22 January 2021 in International Journal of Pavement Engineering
This study developed gradient decision tree boosting (GDTB) models to estimate dynamic moduli ( ) of hot mix asphalt (HMA) mixtures. The GDTB used as input the binder properties, mixture volumetric, and aggregate gradation of the mixtures. The data used for training the GDTB were extracted from a report of the National Cooperative Highway Research Program (NCHRP) project 9-19 [Witczak, M., 2006. Simple performance tests: summary of recommended methods and database. Washington, D.C.: Transportation Research Board, No. 547 in NCHRP Report.]. Totally, 7400 records of data for 346 mixtures were involved, among which 6700 were randomly chosen for training, 200 for validation, and 500 for testing. Comparative analyses were conducted among the GDTB, the two Witczak's equations, and two neural networks (NNs). This study emphasized both the predictive accuracy and computation efficiency of the models. The results indicated that the GDTB achieved predictive accuracy that was significantly higher than the Witczak's models and was in parallel to the more complex NNs. Compared to the Witczak's equations, for the viscosity-based model, the GDTB increased the coefficients of determination ( ) by 51.5% (arithmetic) and 11.5% (logarithmic), respectively; for the based model, it respectively increased the by 22.5% (arithmetic) and 8% (logarithmic). Besides the enhanced predictive accuracy, the GDTB only marginally increased the computing time comparing with the empirical equations.
A new road repair idea has been provided by prefabricated rollable asphalt pavement (Rollpave). In order to meet the need for long-term road performance and special construction technology for Rollpave, an appropriative rollable modified asphalt (RMA) has been developed and used. The road performance of RMA-modified asphalt is tested firstly by three indicators test, and compared with the virgin asphalt and styrene - butadiene - styrene (SBS)-modified asphalt. Then the composition of prefabricated rollable asphalt mixture is designed by modified Marshall test method, and the road performance of prefabricated rollable asphalt mixture is studied by wheel tracking test, −10°C/10°C bending test and immersion Marshall test. Finally, the test section is paved by using prefabricated rollable asphalt pavement. The results showed that the high-temperature properties as well as low-temperature properties and water stability of RMA-modified asphalt mixture are better than that of virgin asphalt mixture and SBS-modified asphalt mixture, and the rollability and road performance of prefabricated rollable asphalt pavement are verified initially by paving the test section.
Pavement surface texture evaluation is mainly analyzed based on elevation data in previous research, and attention also need to be paid to wavelength information. Furthermore, a well-established relationship model between surface texture and skid resistance for real road sections still needs further investigation to help provide useful information on appropriate maintenance time considering skid resistance attenuation. In this research, the macro-texture of asphalt pavement was evaluated from different aspects, including elevation, wavelength information, and geometry, and the relationship models between the macro-texture and skid resistance (at both low and high speeds) were established and compared using the multiple linear regression (MLR) and back propagation (BP) neural network to recommend a suitable one. In order to achieve this, this study monitored anti-skidding performance and the macro-texture of six road sections for 18 months. Firstly, the Dynamic Friction Coefficient (DFC) test and core drilling were conducted on site at three different service times. Additionally, a laboratory accelerated loading test was carried out on specimens prepared by similar material composition to one of the road sections, and the British Pendulum Number (BPN) was tested after different passes of loading. Secondly, 3D laser scanning was carried out on core samples from road sections and laboratory specimens after different passes of loading. The correlation degree between macro-texture indexes and anti-skidding performance was analyzed with the grey correlation entropy analysis method. Finally, the relationship models between the anti-skidding performance at high and low speeds and macro-texture were established based on the MLR and BP neural network. The results indicate that the macro-texture indexes calculated based on elevation data to characterize vertical irregularities have a good correlation with the skid resistance despite the different service times and pavement types. Compared with the BP neural network model, the MLR model has low correlation and noticeable error. The relationship model between F60 (DFC at the speed of 60 km/h) and macro-texture could be well established by the BP neural network. In addition, the relationship between F20, BPN, and pavement surface macro-texture is poor, making it impossible to establish a model with good correlation. Generally, it is recommended to use the BP neural network to establish the relationship model between macro-texture and skid resistance.
26 November 2018 in Road Materials and Pavement Design
The polishing resistance performance and abrasion resistance performance of aggregate affect the long-term skid resistance and durability of the pavement, but there is still a lack of a comprehensive evaluation method to evaluate the aggregate performance in all aspects. This paper presents a study to develop a comprehensive evaluation method based on the assessments of four types of common aggregates in pavement engineering. The Wehner/Schulze polishing test and Micro-Deval abrasion test are used to respectively analyse the polishing resistance performance and abrasion resistance performance of the four aggregates. A comprehensive method for evaluating aggregate properties is proposed based on a laboratory test, the slope of the linear fitting line of the test results and the distribution of the results in the coordinate plot can reflect the performance of different aggregates, thus the coordinate plot is separated into four quadrants, aggregates falling into different quadrants are evaluated as good, fair and poor, respectively, so that to provide reference for aggregate screening or aggregate blending in pavement engineering.