Despite significant progress, malapposed or overlapped stents are a complication that affects daily percutaneous coronary intervention (PCI) procedures. These malapposed stents affect blood flow and create a micro re-circulatory environment. These disturbances are often associated with a change in Wall Shear Stress (WSS), Time-averaged WSS (TAWSS), relative residence time (RRT) and oscillatory character of WSS and disrupt the delicate balance of vascular biology, providing a possible source of thrombosis and restenosis. In this study, 2D axisymmetric parametric computational fluid dynamics (CFD) simulations were performed to systematically analyze the hemodynamic effects of malapposition and stent overlap for two types of stents (drug-eluting stent and a bioresorbable stent). The results of the modeling are mainly analyzed using streamlines, TAWSS, oscillatory shear index (OSI) and RRT. The risks of restenosis and thrombus are evaluated according to commonly accepted thresholds for TAWSS and OSI. The small malapposition distances (MD) cause both low TAWSS and high OSI, which are potential adverse outcomes. The region of low OSI decrease with MD. Overlap configurations produce areas with low WSS and high OSI. The affected lengths are relatively insensitive to the overlap distance. The effects of strut size are even more sensitive and adverse for overlap configurations compared to a well-applied stent.
(2019). Impact of collateral flow on true FFR prediction for left main coronary stenoses with downstream lesions. Computer Methods in Biomechanics and Biomedical Engineering: Vol. 22, 44th Congress of the Société de Biomécanique, pp. S25-S27.
The present study is aimed to investigate the effect of the 3D printing temperature on the mechanical behavior of polymer materials. For this purpose, three levels of 3D printing temperature were chosen according to the polymer melting temperature range. The commercial polylactic acid PLA 3D870 was used as polymer filaments. The effect of the processing temperature on the mechanical elasticity and resistance was studied using 3-point bending test. In addition, two other process parameters were taken into account to determine the interaction effect of each of them with the printing temperature. The experimental results show a considerable effect of temperature on the stiffness and strength of printed polymer parts. The mechanical properties were maximum for the low temperature levels. Moreover, the resistance presents a significant interaction effect between temperature and feed rate on the one hand, and deposit angle on the other hand. For the rigidity, no significant interaction was found.