As solar energy is a variable power source, solar power plants are facing transients that are not experienced in conventional power plants such as nuclear or fossil ones. It is thus of primary importance to be able to simulate the dynamic behavior of the solar plants for their design and operation. The regulation modes have to be decided and the operation strategy has to be optimized. Using concentrated solar energy enables to convert solar power into heat before running thermodynamic cycles. Thermal inertia of the systems along with possible heat thermal storages help to smooth solar variations provided that these systems can be managed dynamically. Two solar power plants (with oil or water/steam as heat transfer fluid) are simulated with Dymola using Modelica code. The solar power plant using oil as heat transfer fluid is already running and preliminary results are compared with simulated data. Concerning the solar steam power plant, the model is run to investigate the regulation scheme of the plant that will be commissioned at the end of 2013. For both plant a DNI perturbation is tested and results are discussed concerning the system response and possible improvements
The present paper deals with both the modeling and the dynamic control of a solar hybrid thermochemical reactor designed to produce syngas through the high-temperature steam gasification of biomass. First, a model of the reactor based on the thermodynamic equilibrium is presented. The Cantera toolbox is used. Then, a model-based predictive controller (MPC) is proposed with the aim of maintaining the reactor’s temperature at its nominal value, thus preserving the reactor’s stability. This is completed by adjusting the mirrors’ defocusing factor or burning a part of the biomass to compensate for variations of direct normal irradiance (DNI) round the clock. This controller is compared to a reference controller, which is defined as a combination of a rule-based controller and an adaptive proportional–integral–derivative (PID) controller with optimized gains. The robustness of the MPC controller to forecast errors is also studied by testing different DNI forecasts: perfect forecasts, smart persistence forecasts and image-based forecasts. Because of a high optimization time, the Cantera function is replaced with a 2D interpolation function. The results show that (1) the developed MPC controller outperforms the reference controller, (2) the integration of image-based DNI forecasts produces lower root mean squared error (RMSE) values, and (3) the optimization time is significantly reduced thanks to the proposed interpolation function.