In this paper, we present a model to simulate accurately the Dark Count Rate (DCR) for Single-Photon Avalanche Diodes (SPAD) in Complementary Metal-Oxide Semiconductor (CMOS) technology. The model development has been driven by the necessity to comply with the specifications of SPAD used for future space LIDAR applications. To evaluate the DCR, the model is based on a combination of measurements to acquire data related to trap population, Technology Computer-Aided Design (TCAD) simulations and a Matlab routine.
Single-Photon Avalanche Diodes (SPAD) in Complementary Metal-Oxide Semiconductor (CMOS) technology are potential candidates for future “Light Detection and Ranging” (Lidar) space systems. Among the SPAD performance parameters, the Photon Detection Probability (PDP) is one of the principal parameters. Indeed, this parameter is used to evaluate the SPAD sensitivity, which directly affects the laser power or the telescope diameter of space-borne Lidars. In this work, we developed a model and a simulation method to predict accurately the PDP of CMOS SPAD, based on a combination of measurements to acquire the CMOS process doping profile, Technology Computer-Aided Design (TCAD) simulations, and a Matlab routine. We compare our simulation results with a SPAD designed and processed in CMOS 180 nm technology. Our results show good agreement between PDP predictions and measurements, with a mean error around 18.5%, for wavelength between 450 and 950 nm and for a typical range of excess voltages between 15 and 30% of the breakdown voltage. Due to our SPAD architecture, the high field region is not entirely insulated from the substrate, a comparison between simulations performed with and without the substrate contribution indicates that PDP can be simulated without this latter with a moderate loss of precision, around 4.5 percentage points.
13 February 2026 in IEEE Transactions on Applied Superconductivity
The X-IFU (X-ray Integral Field Unit), on the future European X-ray observatory NewAthena, will perform high-resolution imaging spectroscopy over an array of 1,504 transition-edge sensors operated at 55 mK. Its readout is performed via time-division multiplexing (TDM) at a few MHz, which relies on fast (but not instantaneous) switching between pixels of the same column. Differences in the currents of consecutive rows lead to signal-dependent transients in the readout. These transients, and how they settle before sampling of the final row signal, are in turn governed by the open-loop bandwidths in the system. Limitations of the bandwidths smear the transients and contaminate the settling of photon pulses, resulting in a frequency- and amplitude-dependent error on the output signal. Switching transients have thus ultimately a direct impact on the instrument's energy scale. Although the origin of these perturbations is well-understood, quantifying their end-to-end impact on performance remains challenging. We compare here experimental data with simulations to assess the accuracy of numerical predictions. We also present an end-to-end analysis of nonlinearity in the X-IFU energy scale due to switching transients, and compare it against current performance budget allocations. These simulations show that the X-IFU can meet its energy scale requirements.