The environmental control system (ECS) is one of the most important systems in the aircraft used to regulate the pressure, temperature and humidity of the air in the cabin. This study investigates the influences of different architectures on the thermal performance and network structure of ECS. The refrigeration and pressurization performances of ECS with four different architectures are analyzed and compared by the endoreversible thermodynamic analysis method, and their external and internal responses have also been discussed. The results show that the connection modes of the heat exchanger have minor effects on the performance of ECSs, but the influence of the air cycle machine is obvious. This study attempts to abstract the ECS as a network structure based on the graph theory, and use entropy in information theory for quantitative evaluation. The results provide a theoretical basis for the design of ECS and facilitate engineers to make reliable decisions.
Air cycle systems (ACSs) are primarily used in aircraft environmental control systems (ECSs) to provide a suitable cabin temperature and pressure environment for passengers and avionics. It comprises heat exchangers, compressors, turbines, water separators, and various other components that are interconnected to form an information-transmission network. Traditional research on ACSs has focused primarily on their thermal performance. This study abstracted ACSs into network graphs based on their information-transmission characteristics, determined the weight of each information-transmission route using the fuel weight penalty method, calculated and compared the order degree of different ACSs using the structure entropy method, and measured the importance of each component using centrality for the first time. The results showed that the order degree of the ACSs gradually increased with an increase in the number of wheels in the air cycle machine (ACM), and ACSs with high-pressure water separation had a higher order degree under wet conditions than under dry conditions. Moreover, based on the centrality of each vertex in the graphs, the ACM and secondary heat exchanger in the ACS were fundamentally important and should be focused on during the system design. The methodology proposed in this study provides a theoretical basis for the evaluation of the ACS organizational structure and the design performance of components.
Humidification and dehumidification are among the most important desalination technologies, in which humidifiers and dehumidifiers are the key components. Previous research has mainly focused on overall system improvement, but few studies have focused on the thermodynamic limitations of the humidification and dehumidification processes. By introducing temperature and enthalpy effectiveness, the thermodynamic limits have been explored. It was successfully established that there are three operating states for the humidifier and dehumidifier. The analytical expressions of enthalpy and temperature effectiveness boundary values in each state were obtained. The results of visualizing the influence of mass flow ratio, inlet temperature, inlet and outlet relative humidity, and pressure on the feasible range of enthalpy and temperature effectiveness were presented. This study explores the thermodynamic limits of heat and mass transfer equipment that can be applied to other types of humidification and dehumidification equipment.
29 April 2023 in International Journal of Aerospace Engineering
The landing phase of an airdrop process is prone to accidents, and thus, it is important to assess the landing reliability for an airdrop system. However, full field tests to assess the reliability are unacceptable due to their cost and the time required. As such, it is necessary to estimate the reliability in the design stage. To address this problem, a method based on vine-Bayesian Network (vine-BN) is proposed to assess the landing reliability by fusing multisource information. First, the network structure is determined by the relationship between data of simulation or ground tests and failure modes. Then, nodes are defined as random variables on [0, 1] based on the definition of the performance metric. Finally, the dependence between nodes is quantified by expert opinions. To illustrate the effectiveness of the method, a particular ground test or simulation is chosen to establish a network for a typical heavy cargo airdrop system (HCADS). Forward and backward propagation is carried out on the network. The forward analysis predicts the landing reliability in the design stage through multisource information fusion. Beta distribution is applied to fit the fusion result, so Bayesian inference is made to perform field test times decision-making. The backward analysis works to identify the key performance metrics related to landing reliability. The results and analysis manifest that vine-BN is feasible for fusing multisource information. Through the network, the reliability of the current design can be predicted effectively, and the field test times can be remarkably reduced. This method plays a crucial role in airdrop system design and reducing test time and labor.
Organ dose calculations performed using human phantoms can provide estimates of astronauts' health risks due to cosmic radiation. However, the characteristics of such phantoms strongly affect the estimation precision. To investigate organ dose variations with body size and posture in human phantoms, a non-uniform rational B-spline boundary surfaces model was constructed based on cryosection images. This model was used to establish four phantoms with different body size and posture parameters, whose organs parameters were changed simultaneously and which were voxelised with 4 × 4 × 4 mm3 resolution. Then, using Monte Carlo transport code, the organ doses caused by ≤500 MeV isotropic incident protons were calculated. The dose variations due to body size differences within a certain range were negligible, and the doses received in crouching and standing-up postures were similar. Therefore, a standard Chinese phantom could be established, and posture changes cannot effectively protect astronauts during solar particle events.