Pliable and lightweight thin-film magnets performing at room temperature are indispensable ingredients of the next-generation flexible electronics. However, conventional inorganic magnets based on f-block metals are rigid and heavy, while the emerging organic/molecular magnets are yet inferior regarding their magnetic characteristics. Here we fuse the best features of the two worlds, by tailoring ε-Fe2O3-terephthalate superlattice thin films with inbuilt flexibility due to the thin organic layers intimately embedded within the ferrimagnetic ε-Fe2O3 matrix; these films are also sustainable as they do not contain rare heavy metals. The films are grown with sub-nm scale accuracy from gaseous precursors using the atomic/molecular layer deposition (ALD/MLD) technique. Tensile tests confirm the expected increased flexibility with increasing organic content reaching a threefold decrease in critical bending radius (2.4±0.3 mm) as compared to ε-Fe2O3 thin film (7.7±0.3 mm). Most remarkably, these hybrid ε-Fe2O3-terephthalate films do not compromise the exceptional intrinsic magnetic characteristics of the ε-Fe2O3 phase, in particular the ultra-high coercive force (~2 kOe) even at room temperature.
18 July 2019 in Angewandte Chemie International Edition
Lithium phosphorus oxynitride (LiPON) is a state-of-the-art solid electrolyte material for thin-film microbatteries. These applications require conformal thin films on challenging 3D surface structures, and among the advanced thin-film deposition techniques, atomic layer deposition (ALD) is believed to stand out in terms of producing appreciably conformal thin films. Here we quantify the conformality (i.e., the evenness of deposition) of thin ALD-grown LiPON films using lateral high-aspect-ratio test structures. Two different lithium precursors, lithium tert-butoxide (LiOtBu) and lithium bis(trimethylsilyl)amide (Li-HMDS), were investigated in combination with diethyl phosphoramidate as the source of oxygen, phosphorus, and nitrogen. The results indicate that the film growth proceeded significantly deeper into the 3D cavities for the films grown from LiOtBu, while the Li-HMDS-based films grew more evenly initially, right after the cavity entrances. These observations can be explained by differences in the precursor diffusion and reactivity. The results open possibilities for the use of LiPON as a solid electrolyte in batteries with high-surface-area electrodes. This could enable faster charging and discharging as well as the use of thin-film technology in fabricating thin-film electrodes of meaningful charge capacity.
The combined atomic/molecular layer deposition (ALD/MLD) technique is emerging as a state-of-the-art synthesis route for new metal–organic thin-film materials with a multitude of properties by combining those of the inorganic and the organic material. A major part of the studies so far reported have focused on aluminum or zinc alkyls, so-called alucone and zincone films, typically grown from trimethyl aluminum (TMA) or diethyl zinc (DEZ) as the metal-bearing precursor, and a simple aliphatic bi-functional alcohol molecule such as ethylene glycol (EG) as the organic precursor. However, these common precursors possess certain disadvantages: both TMA and DEZ are pyrophoric, DEZ being additionally thermally unstable, while EG has a strong tendency for various unideal reaction modes. Here we report novel ALD/MLD processes for alucone and zincone films based on non-pyrophoric bis-diisopropylamido-[3-(N,N-dimethylamino)propyl] aluminum(III) [Al(NiPr2)2(DMP)] and bis-3-(N,N-dimethylamino)propyl zinc(II) [Zn(DMP)2] precursors in combination with hydroquinone (HQ) as the organic precursor. We demonstrate that the [Al(NiPr2)2(DMP)] + HQ and [Zn(DMP)2] + HQ ALD/MLD processes work even at record low deposition temperatures (140 °C and 60 °C, respectively) yielding high-quality and relatively stable Al-HQ and Zn-HQ thin films with appreciably high growth rates (2.8 Å / cycle and 3.2 Å / cycle, respectively). Moreover, these ALD/MLD processes are compatible with the corresponding ALD processes, i.e. [Al(NiPr2)2(DMP)] + H2O and [Zn(DMP)2] + H2O, for the Al2O3 and ZnO films, thus opening up new horizons for the fabrication of novel metal–oxide : organic superlattice structures for e.g. flexible gas-barrier coatings or wearable thermoelectrics.
Atomic/molecular layer deposition (ALD/MLD) allows for the direct gas-phase synthesis of crystalline metal-organic framework (MOF) thin films. Here, we show for the first time using krypton and methanol physisorption measurements that ALD/MLD-fabricated copper 1,4-benzenedicarboxylate (Cu-BDC) ultrathin films possess accessible porosity matching that of the corresponding bulk MOF.