Due to their lightweight properties, fiber-reinforced composites are well suited for large and fast rotating structures, such as fan blades in turbomachines. To investigate rotor safety and performance, in situ measurements of the structural dynamic behaviour must be performed during rotating conditions. An approach to measuring spatially resolved vibration responses of a rotating structure with a non-contact, non-rotating sensor is investigated here. The resulting spectra can be assigned to specific locations on the structure and have similar properties to the spectra measured with co-rotating sensors, such as strain gauges. The sampling frequency is increased by performing consecutive measurements with a constant excitation function and varying time delays. The method allows for a paradigm shift to unambiguous identification of natural frequencies and mode shapes with arbitrary rotor shapes and excitation functions without the need for co-rotating sensors. Deflection measurements on a glass fiber-reinforced polymer disk were performed with a diffraction grating-based sensor system at 40 measurement points with an uncertainty below 15 rad and a commercial triangulation sensor at 200 measurement points at surface speeds up to 300 m/s. A rotation-induced increase of two natural frequencies was measured, and their mode shapes were derived at the corresponding rotational speeds. A strain gauge was used for validation.
In-situ measurements of the deformation and of the structural dynamical behavior of moving composite structures, such as rotors made of glass fiber reinforced polymers (GFRP), are necessary in order to validate newly developed simulation models. Local methods like strain gauges and fiber Bragg gratings lack spatial resolution, while contactless optical methods like image correlation or speckle interferometry suffer from noise effects in the presence of fast rigid body movements. A novel compact sensor – based on the diffraction grating method – is introduced for spatially and temporally resolved strain measurement. The use of a line camera allows the measurement of vibrations up to several tens of kHz. With a scanning movement, strain fields at submillimeter resolution can be recorded. The use of two diffraction orders and an objective lens reduces cross sensitivities to rigid body movements on the strain measurement by two to three orders of magnitude. A validation on a GFRP probe was conducted in a quasi-static tensile test with an optical extensometer up to 14500 µϵ. Furthermore, a strain measurement on a moving rotor at surface speeds up to 75 m/s was performed and the results were compared with those of strain gauges as a gold standard. The statistical standard deviation was around 10 µϵ and independent of the rotational speed.
Lens-based endoscopes offer high lateral resolution, but suffer from rigid imaging properties, such as a fixed focal plane. We present a miniaturized 0.5 mm diameter endoscope in which the objective lens is replaced by an optical diffuser. The intensity information of the object space is scattered and passed to a camera via a coherent fibre bundle. The image is reconstructed by a neural network. The field of view and resolution depend on the object distance. 3D-single-shot imaging up to video rate can be enabled. The approach shows great potential for applications like robust 3D fluorescence imaging.