A rotating detonation rocket engine (RDRE) with various convergent nozzles and chamber lengths is investigated. Three hundred hot-fire tests are performed using methane and oxygen ranging from equivalence ratio equaling 0.5–2.5 and total propellant flow up to 0.680 kg/s. For the full-length (76.2 mm) chamber study, three nozzles at contraction ratios = 1.23, 1.62 and 2.40 are tested. Detonation is exhibited for each geometry at equivalent conditions, with only fuel-rich operability slightly increased for the = 1.62 and 2.40 nozzles. Despite this, counter-propagation, i.e., opposing wave sets, becomes prevalent with increasing constriction. This is accompanied by higher number of waves, lower wave speed and higher unsteadiness. Therefore, the most constricted nozzle always has the lowest . In contrast, engine performance increases with constriction, where thrust and specific impulse linearly increase with for equivalent conditions, with a 27% maximum increase. Additionally, two half-length (38.1 mm) chambers are studied including a straight chamber and = 2.40 nozzle; these shortened geometries show equal performance to their longer equivalent. Furthermore, the existence of counter-propagation is minimized. Accompanying high-fidelity simulations and injection recovery analyses describe underlying injection physics driving chamber wave dynamics, suggesting the physical throat/injector interaction influences counter-propagation.
Rotating detonation rocket engines (RDREs) exhibit various unsteady phenomena, including modal transitions, that significantly affect their operation, performance and stability. The dynamics of the detonation waves are studied during a descending modal transition (DMT) where four co-rotating detonations waves decrease to three in a gaseous methane-oxygen RDRE. Detonation wave tracking is applied to capture, visualize and analyze unsteady, 3D detonation wave dynamics data within the combustion chamber of the RDRE. The mechanism of a descending modal transition is the failure of a detonation wave in the RDRE, and in this study, the failing wave is identified along with its failure time. The regions upstream of each relative detonation show the mixture and flow-field parameters that drive detonation failure. Additionally, it is shown that descending modal transitions encompass multiple phases of detonation decay and recovery with respect to RDREs. The results show high upstream pressure, heat release and temperature, coupled with insufficient propellants, lead to detonation wave failure and non-recovery of the trailing detonation wave during a descending modal transition. Finally, the Wolanski wave stability criterion regarding detonation critical reactant mixing height provides insight into detonation failure or sustainment.