An image processing technique is developed to automatically determine both average and instantaneous detonation wave properties within a rotating detonation rocket engine (RDRE) using high-speed imaging. This method entails segmenting the imaged RDRE annulus into 200 azimuthal bins and tracking integrated pixel intensity in each bin. By combining individual pixel intensity temporal histories across the azimuthal bins, this provides what is termed a detonation surface that visualizes the propagation of the individual detonation fronts azimuthally around the annulus. Average detonation modal properties including wave speed , operational frequency fdet, and the number of waves m are determined automatically through a two-dimensional Fourier analysis of the detonation surface data. Also, instantaneous wave speeds Uwv for each individual detonation are determined by taking the numerical derivative of each waves’ angular position temporal history from the detonation surface. This provides useful insight into wave-to-wave variability for an operating condition, as well as denoting modal transitions and mode stability. For the flow conditions investigated, the number of waves ranges from 2 to 14, with varying between 900 and 1700 m/s, corresponding to 33%–71% of the ideal Chapman-Jouguet detonation speed; these modes exhibit an operational frequency of 20–45 kHz, with an average of 40 kHz. Overall, these measurements advance the understanding of RDRE’s and may lead to performance gains above those achievable from constant pressure engines.
A rotating detonation rocket engine (RDRE) with various convergent nozzles and chamber lengths is investigated. Three hundred hot-fire tests are performed using methane and oxygen ranging from equivalence ratio equaling 0.5–2.5 and total propellant flow up to 0.680 kg/s. For the full-length (76.2 mm) chamber study, three nozzles at contraction ratios = 1.23, 1.62 and 2.40 are tested. Detonation is exhibited for each geometry at equivalent conditions, with only fuel-rich operability slightly increased for the = 1.62 and 2.40 nozzles. Despite this, counter-propagation, i.e., opposing wave sets, becomes prevalent with increasing constriction. This is accompanied by higher number of waves, lower wave speed and higher unsteadiness. Therefore, the most constricted nozzle always has the lowest . In contrast, engine performance increases with constriction, where thrust and specific impulse linearly increase with for equivalent conditions, with a 27% maximum increase. Additionally, two half-length (38.1 mm) chambers are studied including a straight chamber and = 2.40 nozzle; these shortened geometries show equal performance to their longer equivalent. Furthermore, the existence of counter-propagation is minimized. Accompanying high-fidelity simulations and injection recovery analyses describe underlying injection physics driving chamber wave dynamics, suggesting the physical throat/injector interaction influences counter-propagation.
16 November 2022 in Proceedings of the Combustion Institute