In aerostatic thrust bearings (ATBs), a high-pressure gas film with a certain bearing capacity and stiffness is formed by passing high-pressure gas between the moving surface and the static surface. Aerostatic bearings have outstanding advantages in the following aspects: high precision, high speed, and long service life, etc. They are widely used in many fields, such as high-speed air spindles, precision machine tools, air-bearing guideways, turbine machinery, and high-speed drills. With the pursuit of higher efficiency and high-precision machining machinery, there is an increasing demand for high-performance ATBs. Much effort has been spent on the study of ATBs, such as improvements in load capacity and stiffness, and the enhancement of stability. Some significant progress has been achieved. In this paper, the research developments of ATBs are summarized from several aspects, such as theoretical models and experimental methods, static performance, dynamic performance, and applications. In addition, insights on the breakthrough and development trends of ATBs are put forward. It is hoped that this paper can provide some guidance for the design and application of ATBs.
Gas foil bearing has been widely used in high-speed turbo machinery due to its oil-free, wide temperature range, low cost, high adaptability, high stability and environmental friendliness. In this paper, state-of-the-art investigations of gas foil bearings are reviewed, mainly on the development of the high-speed turbo machinery in China. After decades of development, progress has been achieved in the field of gas foil bearing in China. Small-scale applications of gas foil bearing have been realized in a variety of high-speed turbo machinery. The prospects and markets of high-speed turbo machinery are very broad. Various high-speed turbomachines with gas foil bearings have been developed. Due to the different application occasions, higher reliability requirements are imposed on the foil bearing technology. Therefore, its design principle, theory, and manufacturing technology should be adaptive to new application occasions before mass production. Thus, there are still a number of inherent challenges that must be addressed, for example, thermal management, rotor-dynamic stability and wear-resistant coatings.
11 June 2022 in International Journal of Hydrogen Energy
In high-speed motors, there is a huge amount of heat generation from core and winding losses, which may result in thermal failures or motor performance deterioration. In the prevention of heat accumulation, efficient cooling technology is critical for smooth and reliable motor movement. This paper summarizes the diverse application of high-speed motor and thermal requirements, such as in electrical devices, turbo-machinery, and high-precision machine tools. Three paths of case convection—cooling, internal ventilation cooling and spindle core cooling—are analyzed. Methods for configuring thermal resistance and improving cooling efficiency are summarized. Among them, coolant flow characteristics and flow channel shapes, gas supply ventilation systems, and methods to reduce air resistance, as well as axial cooling and integrated heat pipe structures, are extensively investigated. Finally, the development prospects of high-speed motor cooling are also forecasted. At present, the primary research directions are to reduce the heat generated by the heat source, utilize the latent heat of the coolant, optimize the cooling flow path of the shell, design an axial air-cooling circulation system, and enhance the heat dissipation of the spindle.
The liquefaction of hydrogen is considered to be a crucial process in the large-scale utilization of hydrogen energy. In hydrogen liquefaction, hydrogen turbo-expander is a key refrigerating machine for high liquefaction efficiency. Performance of the turbo-expander is directly affected by the hydrogen gas bearings. To obtain a deep understanding of the performance characteristics of hydrogen gas bearings, the static and dynamic characteristics of herringbone grooved journal bearings under hydrogen and other lubricating gases were numerically calculated and compared. The bearing load capacity and critical mass of hydrogen gas bearings were slightly lower than those of helium-, air- and nitrogen-lubricated bearings. To improve the performance of the hydrogen gas bearings used in high-speed turbo-machinery, the influence of working conditions was analyzed. It is found that the load capacity of hydrogen gas bearings can be improved by increasing the ambient pressure, reducing the gas film clearance, and raising the bearing eccentricity ratio. Meanwhile, the critical mass increases, and the bearing dynamic stability is enhanced.
The hydrogen hydrostatic thrust bearing (HHTB) is a key component of hydrogen liquefaction that impacts turbo-expander characteristics. To analyze the feasibility of using the HHTB in this application, characteristics of HHTBs were calculated using a CFD model. To upgrade the performance of the HHTB, the impacts of bearing structure and operating parameters on static performance were investigated. Dynamic characteristics of the HHTB were studied using the dynamic grid method. It was found that the load capacity of the HHTB is less than that of helium-lubricated bearings but higher than that of air- and methane-lubricated bearings. The turbulent kinetic energy of hydrogen is higher than that of other gases. Load capacity can be enhanced through boosting supplied pressure, expanding the diameter of supply orifices, reducing gas film clearance, increasing the orifices quantity and setting a circumferential groove. A reduction in disturbance amplitude slightly increased the bearing’s dynamic stiffness. The dynamic stability of the HHTB was improved by a small film clearance in response to disturbance.