Dominika Stańczak

Mrs. Dominika Stańczak

orcid

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
4 June 2021 in Materials
Verified
Journal Article
Open access
PDF file
Beata JaworskaBeata Jaworska
Beata Jaworska
DSDominika Stańczak
Dominika Stańczak
JTJoanna Tarańska
Joanna Tarańska
JJJerzy Jaworski
Jerzy Jaworski
The generation of energy for the needs of the population is currently a problem. In consideration of that, the biomass combustion process has started to be implemented as a new source of energy. The dynamic increase in the use of biomass for energy generation also resulted in the formation of waste in the form of fly ash. This paper presents an efficient way to manage this troublesome material in the polymer–cement composites (PCC), which have investigated to a lesser extent. The research outlined in this article consists of the characterization of biomass fly ash (BFA) as well as PCC containing this waste. The characteristics of PCC with BFA after 3, 7, 14, and 28 days of curing were analyzed. Our main findings are that biomass fly ash is suitable as a mineral additive in polymer–cement composites. The most interesting result is that the addition of biomass fly ash did not affect the rheological properties of the polymer–cement mortars, but it especially influenced its compressive strength. Most importantly, our findings can help prevent this byproduct from being placed in landfills, prevent the mining of new raw materials, and promote the manufacture of durable building materials.

10 January 2024 in Buildings
Verified
Journal Article
Open access
PDF file
Beata JaworskaBeata Jaworska
Beata Jaworska
DSDominika Stańczak
Dominika Stańczak
PŁPaweł Łukowski
Paweł Łukowski
The subject of this paper is the influence of the partial substitution of cement with mineral additive on the properties of polymer–cement composites (PCCs). Although there is considerable research on the use of perlite in cement concrete, most of the previous studies were conducted with expanded perlite or ground waste perlite, and there is a lack of results evaluating its suitability with polymer–cement composites. To fill this gap, this paper presents the mechanical characteristic of PCC mortars containing waste perlite powder. The modification consisted of replacing part of the cement with waste perlite powder, a byproduct formed during the expansion and fractionation of perlite. The granulometric characteristics of the powder were compiled, and its specific surface area and density were determined. A chemical composition analysis was also carried out. An aqueous dispersion of styrene–acrylic copolymer was used as a polymer modifier. The proportions (by mass) between the contents of the PCC composite components, i.e., cement/polymer (0 to 20%) and cement/mineral powder (0 to 15%), were used as material variables. The technical characteristics tested included the compressive, flexural, and tensile strengths at 28 and 90 days of curing. The compositions of the tested composites were determined using the statistical planning of the experiment. At a low polymer-modifier content in PCC mortars (2.93%), the tested mechanical strengths decreased by five times, with a 6-fold increase in waste content. For mortars containing more than 10% of the polymer modifier, no effect of waste material powder on the flexural strength was observed, while with relatively minor reductions in compressive strength of 2% and 5% and tensile strength of 4% and 2% were observed after 28 and 90 days of curing, respectively. It was shown that it is possible to use waste perlite powder as an ingredient in construction polymer–cement composites, while there is a limiting waste content, above which there is a deterioration in mechanical properties.

9 May 2025 in Materials
Verified
Journal Article
Open access
PDF file
Beata JaworskaBeata Jaworska
Beata Jaworska
DSDominika Stańczak
Dominika Stańczak
RKRafał Kobyłka
Rafał Kobyłka
TGTomasz Golofit
Tomasz Golofit
DZDuo Zhang
Duo Zhang
JKJustyna Kuziak
Justyna Kuziak
To address the challenge of reducing carbon dioxide emissions, this study focuses on carbon dioxide sequestration in calcareous fly ash and its use in mortar and concrete specimens, including reinforced structures. Calcareous fly ash was used in this study because it contains more reactive Ca phases, enabling efficient CO2 capture and long-term storage through mineral carbonation. The research examines the influence of incorporating carbonated fly ash on the protective properties of the concrete cover for steel reinforcement, along with an analysis of the mechanical behavior of the specimens, resistance to weathering carbonation, and the modeling of the service life of reinforced concrete structures. The results indicate that the compressive strength of concrete specimens decreases with the addition of carbonated ash, though by no more than 9% after 90 days. The carbonation rate of concrete increases with the addition of ash; however, a roughly 4% lower rate was observed for carbonated ash compared to non-carbonated ash. No significant impact of ash carbonation on chloride diffusion or the corrosion process of reinforcement in mortars was detected. As a result, the estimated service life of concrete containing both ash and carbonated ash is over 20 times longer than that of the reference concrete.

30 September 2024 in Inżynieria i Budownictwo
Verified
Journal Article
Closed access
DSDominika Stańczak
Dominika Stańczak
Maja KępniakMaja Kępniak
Maja Kępniak
MHMagdalena Horbaczewska
Magdalena Horbaczewska
Beata JaworskaBeata Jaworska
Beata Jaworska
In light of the growing issue of climate change, it is necessary to take actions aimed at reducing the emissions of carbon dioxide (CO2) into the atmosphere. CO2 sequestration, especially in the process of concrete production, can be a crucial step in combating this phenomenon. The study attempted to utilize recycled aggregate for CO2 sequestration and assess its effect on the carbonation depth of the mortar. The loss on ignition analysis of the aggregate showed a 2.9% CO2 absorption. Mortar with carbonated aggregate exhibited the highest degree and depth of carbonation among the tested specimens, albeit eight times lower than the depth typically containing reinforcement bars