Supported metal catalysts are essential to a plethora of processes in the chemical industry. The overall performance of these catalysts depends strongly on the interaction of adsorbates at the atomic level, which can be manipulated and controlled by the different constituents of the active material (i.e., support and active metal). The description of catalyst activity and the relationship between active constituent and the support, or metal–support interactions (MSI), in heterogeneous (thermo)catalysts is a complex phenomenon with multivariate (dependent and independent) contributions that are difficult to disentangle, both experimentally and theoretically. So-called “strong metal–support interactions” have been reported for several decades and summarized in excellent review articles. However, in recent years, there has been a proliferation of new findings related to atomically dispersed metal sites, metal oxide defects, and, for example, the generation and evolution of MSI under reaction conditions, which has led to the designation of (sub)classifications of MSI deserving to be critically and systematically evaluated. These include dynamic restructuring under alternating redox and reaction conditions, adsorbate-induced MSI, and evidence of strong interactions in oxide-supported metal oxide catalysts. Here, we review recent literature on MSI in oxide-supported metal particles to provide an up-to-date understanding of the underlying physicochemical principles that dominate the observed effects in supported metal atomic, cluster, and nanoparticle catalysts. Critical evaluation of different subclassifications of MSI is provided, along with discussions on the formation mechanisms, theoretical and characterization advances, and tuning strategies to manipulate catalytic reaction performance. We also provide a perspective on the future of the field, and we discuss the analysis of different MSI effects on catalysis quantitatively.
Recent developments in heteroatom-doped Cu-based catalysts for CO2 electroreduction into C2+ products are highlighted. The design strategies for doped catalysts and in situ technologies for CO2 electroreduction are discussed.
Utilizing CO2 as a sustainable carbon source to form valuable products requires activating it by active sites on catalyst surfaces. These active sites are usually in or below the nanometer scale. Some metals and metal oxides can catalyze the CO2 transformation reactions. On metal oxide-based catalysts, CO2 transformations are promoted significantly in the presence of surface oxygen vacancies or surface defect sites. Electrons transferable to the neutral CO2 molecule can be enriched on oxygen vacancies, which can also act as CO2 adsorption sites. CO2 activation is also possible without necessarily transferring electrons by tailoring catalytic sites that promote interactions at an appropriate energy level alignment of the catalyst and CO2 molecule. This review discusses CO2 activation on various catalysts, particularly the impacts of various structural factors, such as oxygen vacancies, on CO2 activation.
17 November 2022 in Applied Catalysis B: Environment and Energy
The fluid catalytic cracking (FCC) technology is one of the pillars of the modern petroleum industry which converts the crude oil fractions into many commodity fuels and platform chemicals, such as gasoline. Although the FCC field is quite mature, the research scope is still enormous due to changing FCC feedstock, gradual shifts in market demands and evolved unit operations. In this review, we have described the current status of FCC technology, such as variation in the present day feedstocks and catalysts, and particularly, great attention is paid to the effects of various contaminants of the FCC catalysts of which the latter part has not been sufficiently documented and analyzed in the literature yet. Deposition of various contaminants on cracking catalyst during FCC process, including metals, sulfur, nitrogen and coke originated from feedstocks or generated during FCC reaction constitutes a source of concern to the petroleum refiners from both economic and technological perspectives. It causes not only undesirable effects on the catalysts themselves, but also reduction in catalytic activity and changes in product distribution of the FCC reactions, translating into economic losses. The metal contaminants (vanadium (V), nickel (Ni), iron (Fe) and sodium (Na)) have the most adverse effects that can seriously influence the catalyst structure and performance. Although nitrogen and sulfur are considered less harmful compared to the metal contaminants, it is shown that pore blockage by the coking effect of sulfur and acid sites neutralization by nitrogen are serious problems too. Most recent studies on the deactivation of FCC catalysts at single particle level have provided an in-depth understanding of the deactivation mechanisms. This work will provide the readers with a comprehensive understanding of the current status, related problems and most recent progress made in the FCC technology, and also will deepen insights into the catalyst deactivation mechanisms caused by contaminants and the possible technical approaches to controlling catalyst deactivation problems.
Developing high-performance Pt-based catalysts with low Pt loading is crucial but challenging for CO oxidation at temperatures below 100 °C. Herein, we report a Pt-based catalyst with only a 0.15 wt% Pt loading, which consists of Pt–Ti intermetallic single-atom alloy (ISAA) and Pt nanoparticles (NP) co-supported on a defective TiO2 support, achieving a record high turnover frequency of 11.59 s–1 at 80 °C and complete conversion of CO at 120 °C. This is because the coexistence of Pt–Ti ISAA and Pt NP significantly alleviates the competitive adsorption of CO and O2, enhancing the activation of O2. Furthermore, Pt single atom sites are stabilized by Pt–Ti ISAA, resulting in distortion of the TiO2 lattice within Pt–Ti ISAA. This distortion activates the neighboring surface lattice oxygen, allowing for the simultaneous occurrence of the Mars-van Krevelen and Langmuir–Hinshelwood reaction paths at low temperatures.