In the era of 5G and the Internet of things (IoTs), various human–computer interaction systems based on the integration of triboelectric nanogenerators (TENGs) and IoTs technologies demonstrate the feasibility of sustainable and self-powered functional systems. The rapid development of intelligent applications of IoTs based on TENGs mainly relies on supplying the harvested mechanical energy from surroundings and implementing active sensing, which have greatly changed the way of human production and daily life. This review mainly introduced the TENG applications in multidiscipline scenarios of IoTs, including smart agriculture, smart industry, smart city, emergency monitoring, and machine learning-assisted artificial intelligence applications. The challenges and future research directions of TENG toward IoTs have also been proposed. The extensive developments and applications of TENG will push forward the IoTs into an energy autonomy fashion.
Low temperature processed, metal-oxide free planar perovskite solar cells (PSCs) were fabricated using polyetherimide (PEI) modified poly(3,4-ethylenedioxylenethiophene):poly(styrene sulfonate) (PEDOT:PSS) as the cathode.
In this study, we introduced alcohol based vapor annealing of a poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) layer for fabricating high-performance inverted perovskite solar cells. Atomic force microscopy measurements and atomistic theoretical simulations indicated that phase separation between PEDOT and PSS was enhanced by this annealing, improving the hole conductivity at the PEDOT:PSS layer. As a result of using methanol, the short-circuit current density improved from 20.7 to 21.6 mA cm−2; consequently, the power conversion efficiency (PCE) improved from 16.1 to 17.3%. However, using ethanol or isopropanol yielded a smaller performance improvement. The PCEs of the best sample in this study under forward and reverse scans were 17.7 and 18.0%, respectively, indicating that the PSC had a small hysteresis. Our results suggest that alcohol vapor annealing is a simple and effective method of developing high-performance inverted perovskite solar cells.
For an iron-chromium redox flow battery (ICRFB), sulfonated poly(ether ether ketone) (SPEEK) membranes with five various degrees of sulfonation (DSs) are studied. To select the SPEEK membrane with the ideal DS for ICRFB applications, the physicochemical characteristics and single-cell performance are taken into consideration. Following all the investigations, it has been determined that the SPEEK membrane, which has a DS of 57% and a thin thickness of 25 μm, is the best option for replacing commercial Nafion 212 in ICRFB. Firstly, it exhibits a better cell performance according to energy efficiency (EE) and coulombic efficiency (CE) at the current density range between 40 mA cm−2 and 80 mA cm−2. Additionally, it has a more stable EE (79.25–81.64%) and lower discharge capacity decay rate (50%) than the Nafion 212 (EE: 76.74–81.45%, discharge capacity decay: 76%) after 50 charge–discharge cycles, which proves its better oxidation stability as well. In addition, the longer self-discharge time during the open-circuit voltage test further demonstrates that this SPEEK membrane could be employed for large-scale ICRFB applications.