This study aimed to modify poly(ε‐caprolactone) (PCL) membranes with sodium heparin (SH) and essential fatty acids (EFA) for later application in wound healing. The electrospinning technique was used to prepare the membranes containing the maximum concentration of SH and EFA, which were then sterilized with ozone. Microbiological tests confirmed effective sterilization. The membrane characterization included scanning electron microscopy for morphological analysis, contact angle determination for wettability studies, Fourier‐transform infrared spectroscopy (FT‐IR) analysis, and thermogravimetry for thermal analysis. Results indicated that the average diameter membrane of PCL, PCL + SH, and PCL + EFA nanofibers was 1.16 ± 0.99 μm, 0.98 ± 0.66 μm and 1.53 ± 0.92 μm, respectively. Adding SH and EFA affected the fiber diameter, with PCL + SH fibers having a smaller diameter than pure PCL and PCL + EFA fibers. The contact angle of the membrane is 123° (PCL), 102° (PCL + SH), and 95° (PCL + EFA). Wettability analysis demonstrated modified surface properties with reduced contact angles. Sterilization of PCL membranes modified with SH and EFA has shown effectiveness in eliminating bacteria and other microorganisms, increasing the permeability of the membranes. Morphological analysis showed well‐formed and randomly distributed fibers, although the PCL + SH membrane exhibited beads on its fibers. FT‐IR analysis showed slight contributions of SH and EFA in the modified PCL membranes, while thermal analysis revealed no substantial changes in thermal stability. In conclusion, PCL membranes modified with SH and EFA can potentially accelerate wound healing, presenting an innovative and cost‐effective approach to treating skin injuries.
20 August 2025 in International Journal of Polymer Analysis and Characterization
Kahoot is an application designed for polling and learning assessment. It introduces gamification-based learning into the classroom. This article, of a bibliographical and descriptive nature, intends to present the Kahoot application as a means of stimulating and engaging students in the teaching-learning process. It analyzes some implications of learning with a mobile device, in addition to highlighting the advantages of using Kahoot in the classroom.
1 January 2025 in International Journal of Biomaterials
This study focuses on developing and characterizing electrospun polycaprolactone (PCL) membranes as scaffolds for cell growth, leveraging their ability to mimic the extracellular matrix and promote cell proliferation. The membranes were fabricated by electrospinning and sterilized using ozone at room temperature. Comprehensive characterization techniques, including scanning electron microscopy (SEM), contact angle measurements, ultraviolet–visible spectroscopy (UV–Vis), differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), Fourier transform infrared (FTIR) spectroscopy, Raman spectroscopy, and in vitro biocompatibility assays with MRC‐5 cells, were employed. The electrospun membranes exhibited uniform fibers with an average diameter of 403 ± 100 nm and demonstrated sterility, with no microbial growth observed after incubation. Contact angle measurements revealed values of 123 ± 0.42° and 123 ± 0.25° for nonsterilized and sterilized membranes, respectively, indicating consistent hydrophobicity. Thermal analyses confirmed the structural stability of PCL membranes, while UV–Vis studies validated their controlled degradation and release kinetics. FTIR and Raman spectroscopy confirmed that ozone sterilization preserved the chemical integrity of the membranes, with no new organic functions observed. Biocompatibility assays demonstrated high cell viability (> 97%) and effective adhesion on the membranes, highlighting their compatibility and suitability for supporting cell proliferation. These results demonstrate the efficacy of ozone sterilization and the potential of electrospun PCL membranes for a wide range of biomedical applications, including tissue engineering, wound healing, and drug delivery systems.
1 January 2026 in Anais da Academia Brasileira de Ciências
Gold nanoparticles (AuNPs) exhibit remarkable optical, electrical, and biological properties, making them highly desirable for biomedical applications. This study compared two distinct AuNPS synthesis routes: the Turkevich method, employing sodium citrate as a reducing agent, and a green synthesis method using tannic acid. UV-Vis spectroscopy and FTIR confirmed successful synthesis, revealing spherical, monodisperse AuNPs. Sodium citrate-synthesized AuNPs exhibited an average diameter of 19.40 ± 2.34 nm and demonstrated lower cytotoxicity, with cell viability of approximately 85.89%, suggesting suitability for drug delivery. In contrast, tannic acid-synthesized AuNPs had an average diameter of 9.56 ± 2.66 nm and reduced cell viability to approximately 40.56%, making them potential candidates for targeted anticancer therapies. Antibacterial assays revealed no significant activity for either type of AuNPs against tested bacteria, consistent with studies indicating that higher concentrations or larger particle sizes may be necessary for antibacterial effects. These findings emphasize the importance of tailoring AuNPs properties based on their intended biomedical use, with implications for enhancing sustainability and functionalization approaches.
26 July 2024 in Revista Brasileira da Educação Profissional e Tecnológica
As urgências ambientais atravessam e mobilizam a Educação Profissional e Tecnológica (EPT) no que diz respeito à necessidade de um agir ético. A Ética do Cuidado emerge como modo de atuar no mundo e agir profissionalmente. O artigo em cena, tem por finalidade se constituir como uma provocação à EPT diante das questões ambientais e apontar algumas pistas reflexivas acerca de seu processo. Para tanto, estrutura-se a partir de uma pesquisa bibliográfica e documental que articulam o fenômeno investigado, ressaltando os elementos que baseiam a noção do cuidado. Como resultado apresenta três provocações da Ética do Cuidado à EPT: reconhecimento de si e do fazer; compreensão como processo e responsabilidade para com nossa casa-comum.