Modified halloysite nanotubes (HNTs-Cl) were synthesized by a coupling reaction with (3-chloropropyl) trimethoxysilane (CPTMS). The incorporation of chloro-silane onto HNTs surface creates HNTs-Cl, which has great chemical activity and is considered a good candidate as an active site that reacts with other active molecules in order to create new materials with great applications in chemical engineering and nanotechnology. The value of this work lies in the fact that improving the degree of grafting of chloro-silane onto the HNT’s surface has been accomplished by incorporation of HNTs with CPTMS under different experimental conditions. Many parameters, such as the dispersing media, the molar ratio of HNTs/CPTMS/H2O, refluxing time, and the type of catalyst were studied. The greatest degree of grafting was accomplished by using toluene as a medium for the grafting process, with a molar ratio of HNTs/CPTMS/H2O of 1:1:3, and a refluxing time of 4 h. The addition of 7.169 mmol of triethylamine (Et3N) and 25.97 mmol of ammonium hydroxide (NH4OH) led to an increase in the degree of grafting of CPTMS onto the HNT’s surface.
The binary xerogels TiO2-SiO2 are widely used as catalysts and their carriers in organic synthesis. Characterization and adjustment of the electrostatic properties of the surface and the local acidity inside the pores, are necessary for the further development of TiO2-SiO2 xerogels applications. This research investigates acid–base equilibria in the pores, and the surface electrostatic potential (SEP) of binary TiO2-SiO2 xerogels, by the EPR of stable pH-sensitive nitroxide radicals. These radicals are small enough to penetrate directly into the pores, and to be adsorbed onto the surface of the material under study. This makes it possible to obtain valuable information on the acidic and electrosurface properties of the studied system. The highest negative surface electrical charge associated with surface electrical potential (SEP) was equal to −196 ± 6 mV. It was induced by the surface of the sample with a 7% TiO2 content. The local acidity inside the pores of this sample was found to be higher, by approximately 1.49 pH units, as compared to that in the external bulk solution.
Halloysite is modified with 3-aminopropyltriethoxysilane in various solvents without pretreatment. According to elemental analysis, FTIR spectroscopy, and thermogravimetry, the reaction between 3‑aminopropyltriethoxysilane and halloysite successfully proceeds regardless of the nature of the solvent. The maximum degree of functionalization of interaction products is achieved at the equimolar silane : halloysite ratio; as this value is increased, the degree of functionalization decreases. The magnitude of the degree of hydrolysis changes symbatically with the degree of functionalization.
18 March 2014 in Russian Journal of Inorganic Chemistry
Cohydrolysis of tetrabutoxytitanium and tetraethoxysilane in a desiccator in the presence of water vapor produced a TiO2-SiO2 binary xerogel and its Cu(II)-containing analog. The hydrolysis was performed without using either a solvent, or redox catalysts. The effect of the synthesis conditions on the physicochemical properties of the obtained material was studied.