This study presents an optimized and comparative investigation of four intelligent energy management strategies—Proportional–Integral–Derivative (PID), Fuzzy Logic Control (FLC), Equivalent Consumption Minimization Strategy (ECMS), and Artificial Neural Network (ANN)—applied to a photovoltaic–fuel cell–battery hybrid electric vehicle (PV–FC–HEV). A high-fidelity MATLAB/Simulink model integrates a 6 kW proton-exchange membrane fuel cell (PEMFC), a 500 W photovoltaic subsystem with MPPT, and a lithium-ion battery (LiB) pack. While 1000 W/m2 represents Standard Test Conditions (STC), the level of 400 W/m2 was specifically selected to simulate average cloudy conditions common in urban driving environments, rather than standard NOCT (800 W/m2), to test the EMS’s robustness under significantly reduced PV support and stressed battery conditions (initial SOC = 30%). While surface contamination and the resulting performance degradation significantly impact real-world results, this study assumes a clean surface to establish an idealized performance baseline for the control algorithms. However, the authors acknowledge that contaminant accumulation is a key factor; future work will incorporate a degradation factor (e.g., a 10–15% efficiency penalty) to evaluate the reliability of these EMS strategies under actual operating conditions. ECMS achieved the lowest hydrogen consumption, saving up to 10 L compared with PID, while ANN maintained the most stable state of charge (SOC > 80%), minimizing deep discharge cycles and improving operational stability. FLC provided balanced operation under fluctuating irradiance. Overall, ANN offered the most harmonized energy flow and dynamic stability, whereas ECMS maximized fuel economy. The findings provide practical guidance for designing sustainable and intelligent control systems in next-generation hybrid electric vehicles.
1 April 2025 in Journal of the Egyptian Society of Tribology
The brake system is one of the important systems in vehicles because of its importance in stopping the car in the shortest stopping distance. Some appropriate systems help the brake system work to reduce the stopping distance. These systems include an anti-lock brake system. The Anti-Lock Braking System (ABS) is one of the most important safety features in modern vehicles because it helps the driver control his vehicle and stability. It is a device integrating complicated electronic systems, hydraulic systems, and mechanical components, as it prevents the wheels from locking up when applying the brake, which reduces the braking time and stops distance. It is possible to produce faults in these systems due to extreme vehicle operating conditions, which may lead to the failure of the ABS and stop operating. In this paper, much previous research which discussed the different types of faults, control techniques used in this system, and the components of these systems.