Floods are among the most frequent and destructive natural hazards worldwide, with increasingly severe socioeconomic consequences due to rapid urbanization, land use changes, and climate variability. While the combination of Geographic Information Systems (GIS) with models such as HEC-RAS has been extensively explored for flood risk management, many existing studies remain limited to one-dimensional (1D) models or use coarse-resolution terrain data, often underestimating flood risk and failing to produce critical multivariate flood characteristics in densely built urban areas. This study applies a two-dimensional (2D) hydraulic modeling framework in HEC-RAS combined with GIS-based spatial analysis, using a high-resolution (1 × 1 m) LiDAR-derived Digital Terrain Model (DTM) and a hybrid mesh refined between 2 × 2 m and 8 × 8 m, with the main contributions represented by the specific application context and methodological choices. A key methodological aspect is the direct integration of synthetic hydrographs with defined exceedance probabilities (10%, 1%, and 0.1%) into the 2D model, thereby reducing the need for extensive hydrological simulations and defining a data-driven approach for resource-constrained environments. The primary novelty is the application of this high-resolution urban modeling framework to a Romanian urban–peri-urban setting, where detailed hydrological observations are scarce. Unlike previous studies in Romania, this approach applies detailed channel and floodplain discretization at high spatial resolution, explicitly incorporating anthropogenic features like buildings and detailed land use roughness for the accurate representation of local hydraulic dynamics. The resulting outputs (inundation extents, depths, and velocities) support risk assessment and spatial planning in the Ungheni locality (Iași County, Romania), providing a practical, transferable workflow adapted to data-scarce regions. Scenario results quantify vulnerability: for the 0.1% exceedance probability scenario (with a calibration accuracy of ±15–30 min deviation for peak flow timing), the flood risk may affect 882 buildings, 42 land parcels, and 13.5 km of infrastructure. This framework contributes to evidence-based decision-making for climate adaptation and disaster risk reduction strategies, improving urban resilience.

Hazards associated with natural factors annually result in significant human and economic losses. An accurate and up-to-date assessment of various hazards can limit their impact and bring benefits both in the modeling phase and mostly in the risk mitigation plan stage. The article presents the results of a multi-hazard analysis that considers floods, landslides, and earthquakes carried out in the Ungheni area, located in the eastern part of Romania at the border with the Republic of Moldova. The research focused on producing harmonized hazard maps for the two countries since the area spreads jointly between the two countries. Common geospatial data were used for modeling and risk assessment, such as airborne laser scanners, global navigation satellite systems, rasters, and vectors from analog and digital sources. Among hazards, the flood maps for the studied area, Ungheni, were designed using 2D hydraulic modeling in HECRAS software (version 6.3.1); the landslide maps considered the ArcGis platform following Romanian methodology; and the seismic analysis collected onsite measurements on the built environment. The shared use of geospatial data in modeling the three hazards led to high accuracy of the results and determined their spatial homogeneity. It was observed that only two areas, Mînzătești and Coada Stîncii villages from Ungheni Areal, are highly vulnerable to all three hazards. The research findings, along with mitigation recommendations, have contributed to the development of a more precise action plan for natural hazards events by local authorities and decision-makers.

Hydrodynamic modeling and hazard mapping are essential tools for urban flood mitigation and spatial planning. Leveraging software like HEC-RAS (Hydrologic Engineering Center - River Analysis System) and ArcGIS, this study aimed to map flood-prone areas along the Jijia River in the Ungheni administrative unit of Iasi County. Human-induced environmental changes and global climate shifts have heightened flood risks worldwide, particularly in urbanized areas. Hydrological and hydraulic modeling anticipate and assess flood events, while hydrodynamic modeling accurately simulates flow propagation, in-forming flood extent, timing, and volume. Flood hazard maps offer essential insights into flooded areas, water depths, and velocities, assisting in risk assessment and mitigation strategies. Through the use of different scenarios, river modeling aims to accurately replicate real-world conditions. This study focuses on Ungheni commune in Iasi County, Romania, situated along the Prut River's eastern bank. Utilizing a combination of fixed-grid and irregular mesh elements in modeling al-lows for fine-tuning of flow details and optimization of simulation times. Model accuracy, particularly regarding peak river levels, hinges on hydrograph duration. While a 30-minute error is typically accepted, greater tolerances may apply to river basins with longer response times. The extraction and processing of model results, including maximum water depths, flood extents, and velocity maps, are facilitated by ArcGIS, providing valuable data for effective flood management strategies.

This paper analyzes the flood that occurred between 11^th and 13^th of September 2013 in the upper catchment of the river Geru. The flood was simulated using the program Mike by DHI with the Unitary Hydrograph Method. As input data, we used the precipitation measured at the Automated Hydrological Sensor Station Cudalbi and radar precipitations. We analyzed the importance of accuracy for input data on the simulation results and the direct influence of setting the proper time steps in achieving the simulated discharge hydrograph. It appears that radar precipitations used as input data lead to a discharge hydrograph with low errors for amplitude and phase of the runoff peak. The model can be used in the future to reproduce the floods produced in the analyzed catchment and to study the influence of physical and geographical characteristics of the hillslopes.