We propose the Point Cloud Tree Species Classification Network (PCTSCN) to overcome challenges in classifying tree species from laser data with deep learning methods. The network is mainly composed of two parts: a sampling component in the early stage and a feature extraction component in the later stage. We used geometric sampling to extract regions with local features from the tree contours since these tend to be species-specific. Then we used an improved Farthest Point Sampling method to extract the features from a global perspective. We input the intensity of the tree point cloud as a dimensional feature and spatial information into the neural network and mapped it to higher dimensions for feature extraction. We used the data obtained by Terrestrial Laser Scanning (TLS) and Unmanned Aerial Vehicle Laser Scanning (UAVLS) to conduct tree species classification experiments of white birch and larch. The experimental results showed that in both the TLS and UAVLS datasets, the input tree point cloud density and the highest feature dimensionality of the mapping had an impact on the classification accuracy of the tree species. When the single tree sample obtained by TLS consisted of 1024 points and the highest dimension of the network mapping was 512, the classification accuracy of the trained model reached 96%. For the individual tree samples obtained by UAVLS, which consisted of 2048 points and had the highest dimension of the network mapping of 1024, the classification accuracy of the trained model reached 92%. TLS data tree species classification accuracy of PCTSCN was improved by 2–9% compared with other models using the same point density, amount of data and highest feature dimension. The classification accuracy of tree species obtained by UAVLS was up to 8% higher. We propose PCTSCN to provide a new strategy for the intelligent classification of forest tree species.

Automatic power line extraction from aerial images of unmanned aerial vehicles is one of the key technologies of power line inspection. However, the faint power line targets and complex image backgrounds make the extraction of power lines a greater challenge. In this paper, a new power line extraction method is proposed, which has two innovative points. Innovation point one, based on the introduction of the Mask RCNN network algorithm, proposes a block extraction strategy to realize the preliminary extraction of power lines with the idea of “part first and then the whole”. This strategy globally reduces the anchor frame size, increases the proportion of power lines in the feature map, and reduces the accuracy degradation caused by the original negative anchor frames being misclassified as positive anchor frames. Innovation point two, the proposed connected domain group fitting algorithm solves the problem of broken and mis-extracted power lines even after the initial extraction and solves the problem of incomplete extraction of power lines by background texture interference. Through experiments on 60 images covering different complex image backgrounds, the performance of the proposed method far exceeds that of commonly used methods such as LSD, Yolact++, and Mask RCNN. DSC_PL, TPR, precision, and accuracy are as high as 73.95, 81.75, 69.28, and 99.15, respectively, while FDR is only 30.72. The experimental results show that the proposed algorithm has good performance and can accomplish the task of power line extraction under complex image backgrounds. The algorithm in this paper solves the main problems of power line extraction and proves the feasibility of the algorithm in other scenarios. In the future, the dataset will be expanded to improve the performance of the algorithm in different scenarios.

With the continuous development of surface observation methods and technologies, we can acquire multiple sources of data more effectively in the same geographic area. The quality and availability of these data have also significantly improved. Consequently, how to better utilize multi-source data to represent ground information has become an important research question in the field of geoscience. In this paper, a novel model called multi-modal transformer cascaded fusion net (MMTCFN) is proposed for fusion and classification of multi-modal remote sensing data, Hyperspectral Imagery (HSI) and LiDAR data. Feature fusion and feature extraction are the two stages of the model. First, in the feature extraction stage, a three-branch cascaded Convolutional Neural Network (CNN) framework is employed to fully leverage the advantages of convolutional operators in extracting shallow-level local features. Based on this, we generated multi-modal long-range integrated deep features utilizing the transformer-based vectorized pixel group transformer (VPGT) module during the feature fusion stage. In the VPGT block, we designed a vectorized pixel group embedding that preserves the global features extracted from the three branches in a non-overlapping multi-space manner. Moreover, we introduce the DropKey mechanism into the multi-head self-attention (MHSA) to alleviate overfitting caused by insufficient training samples. Finally, we employ a probabilistic decision fusion strategy to integrate multiple class estimations, assigning a specific category to each pixel. This model was experimented on three HSI-LiDAR datasets with balanced and unbalanced training samples. The proposed model outperforms the other seven SOTA approaches in terms of OA performance, proving the superiority of MMTCFN for the HSI-LiDAR classification task.

UAV transmission tower inspection is the use of UAV technology for regular inspection and troubleshooting of towers on transmission lines, which helps to improve the safety and reliability of transmission lines and ensures the stability of the power supply. From the traditional manual tower boarding to the current way of manually selecting target camera shooting points from 3D point clouds to plan the inspection path of the UAV, operational efficiency has drastically improved. However, indoor planning work is still labor-consuming and expensive. In this paper, a deep learning-based point cloud transmission tower segmentation (PCTTS) model combined with the corresponding target point localization algorithm is proposed for automatic segmentation of transmission tower point cloud data and automatically localizing the key inspection component as the target point for UAV inspection. First, we utilize octree sampling with unit ball normalization to simplify the data and ensure translation invariance before putting the data into the model. In the feature extraction stage, we encode the point set information and combine Euclidean distance and cosine similarity features to ensure rotational invariance. On this basis, we adopt multi-scale feature extraction, construct a local coordinate system, and introduce the offset-attention mechanism to enhance model performance further. Then, after the feature propagation module, gradual up-sampling is used to obtain the features of each point to complete the point cloud segmentation. Finally, combining the segmentation results with the target point localization algorithm completes the automatic extraction of UAV inspection target points. The method has been applied to six kinds of transmission tower point cloud data of part segmentation results and three kinds of transmission tower point cloud data of instance segmentation results. The experimental results show that the model achieves mIOU of 94.1% on the self-built part segmentation dataset and 86.9% on the self-built instance segmentation dataset, and the segmentation accuracy outperforms that of the methods for point cloud segmentation, such as PointNet++, DGCNN, Point Transformer, and PointMLP. Meanwhile, the experimental results of UAV inspection target point localization also verify the method’s effectiveness in this paper.

Tree species identification is a critical component of forest resource monitoring, and timely and accurate acquisition of tree species information is the basis for sustainable forest management and resource assessment. Airborne hyperspectral images have rich spectral and spatial information and can detect subtle differences among tree species. To fully utilize the advantages of hyperspectral images, we propose a double-branch spatial–spectral joint network based on the SimAM attention mechanism for tree species classification. This method achieved high classification accuracy on three tree species datasets (93.31% OA value obtained in the TEF dataset, 95.7% in the Tiegang Reservoir dataset, and 98.82% in the Xiongan New Area dataset). The network consists of three parts: spectral branch, spatial branch, and feature fusion, and both branches make full use of the spatial–spectral information of pixels to avoid the loss of information. In addition, the SimAM attention mechanism is added to the feature fusion part of the network to refine the features to extract more critical features for high-precision tree species classification. To validate the robustness of the proposed method, we compared this method with other advanced classification methods through a series of experiments. The results show that: (1) Compared with traditional machine learning methods (SVM, RF) and other state-of-the-art deep learning methods, the proposed method achieved the highest classification accuracy in all three tree datasets. (2) Combining spatial and spectral information and incorporating the SimAM attention mechanism into the network can improve the classification accuracy of tree species, and the classification performance of the double-branch network is better than that of the single-branch network. (3) The proposed method obtains the highest accuracy under different training sample proportions, and does not change significantly with different training sample proportions, which are stable. This study demonstrates that high-precision tree species classification can be achieved using airborne hyperspectral images and the methods proposed in this study, which have great potential in investigating and monitoring forest resources.

Arc sag is an important parameter in the design and operation and maintenance of transmission lines and is directly related to the safety and reliability of grid operation. The current arc sag measurement method is inefficient and costly, which makes it difficult to meet the engineering demand for fast inspection of transmission lines. In view of this, this paper proposes an automatic spacer bar segmentation algorithm, CM-Mask-RCNN, that combines the CAB attention mechanism and MHSA self-attention mechanism, which automatically extracts the spacer bars and calculates the center coordinates, and combines classical algorithms such as beam method leveling, spatial front rendezvous, and spatial curve fitting, based on UAV inspection video data, to realize arc sag measurement with a low cost and high efficiency. It is experimentally verified that the CM-Mask-RCNN algorithm proposed in this paper achieves an AP index of 73.40% on the self-built dataset, which is better than the Yolact++, U-net, and Mask-RCNN algorithms. In addition, it is also verified that the adopted approach of fusing CAB and MHSA attention mechanisms can effectively improve the segmentation performance of the model, and this combination improves the model performance more significantly compared with other attention mechanisms, with an AP improvement of 2.24%. The algorithm in this paper was used to perform arc sag measurement experiments on 10 different transmission lines, and the measurement errors are all within ±2.5%, with an average error of −0.11, which verifies the effectiveness of the arc sag measurement method proposed in this paper for transmission lines.