Over the past few years, the research community has witnessed a burgeoning interest in biomimetics, particularly within the marine sector. The study of biomimicry as a revolutionary remedy for numerous commercial and research-based marine businesses has been spurred by the difficulties presented by the harsh maritime environment. Biomimetic marine robots are at the forefront of this innovation by imitating various structures and behaviors of marine life and utilizing the evolutionary advantages and adaptations these marine organisms have developed over millennia to thrive in harsh conditions. This thorough examination explores current developments and research efforts in biomimetic marine robots based on their propulsion mechanisms. By examining these biomimetic designs, the review aims to solve the mysteries buried in the natural world and provide vital information for marine improvements. In addition to illuminating the complexities of these bio-inspired mechanisms, the investigation helps to steer future research directions and possible obstacles, spurring additional advancements in the field of biomimetic marine robotics. Considering the revolutionary potential of using nature’s inventiveness to navigate and thrive in one of the most challenging environments on Earth, the current review’s conclusion urges a multidisciplinary approach by integrating robotics and biology. The field of biomimetic marine robotics not only represents a paradigm shift in our relationship with the oceans, but it also opens previously unimaginable possibilities for sustainable exploration and use of marine resources by understanding and imitating nature’s solutions.

The selection of process parameters is crucial in 3D printing for product manufacturing. These parameters govern the operation of production machinery and influence the mechanical properties, production time, and other aspects of the final product. The optimal process parameter settings vary depending on the product and printing application. This study identifies the most suitable cluster of process parameters for producing rotating components, specifically impellers, using carbon-reinforced Polyether Ether Ketone (CF-PEEK) thermoplastic filament. A mathematical programming technique using a rating method was employed to select the appropriate process parameters. The research concludes that an infill density of 70%, a layer height of 0.15 mm, a printing speed of 60 mm/s, a platform temperature of 195 °C, an extruder temperature of 445 °C, and an extruder travel speed of 95 mm/s are optimal process parameters for manufacturing rotating components using carbon-reinforced PEEK material.

The article reviews the progress made on bronze alloys processed through various casting techniques, and focuses on enhancements in the microstructural characteristics, hardness, tensile properties, and tribological behaviour of Cu-Sn and Cu-Sn-Ti alloys. Copper and its alloys have found several applications in the fields of automobiles, marine and machine tools specifically for propellers in submarines, bearings, and bushings. It has also been reported that bronze alloys are especially used as an anti-wear and friction-reducing material to make high performance bearings for roller cone cock bits and warships for defence purposes. In these applications, properties like tensile strength, yield strength, fatigue strength, elongation, hardness, impact strength, wear resistance, and corrosion resistance are very important; however, these bronze alloys possess only moderate hardness, which results in low wear resistance, thereby limiting the application of these alloys in the automobile industry. The major factor that influences the properties of bronze alloys is the microstructure. Morphological changes in these bronze alloys are achieved through different manufacturing techniques, such as casting, heat treatment, and alloy addition, which enhance the mechanical, tribological, and corrosion characteristics. Alloying of Ti to cast Cu-Sn is very effective in changing the microstructure of bronze alloys. Reinforcing the bronze matrix with several ceramic particles and surface modifications also improves the properties of bronze alloys. The present article reviews the techniques involved in changing the microstructure and enhancing the mechanical and tribological behaviours of cast Cu-Sn and Cu-Sn-Ti alloys. Moreover, this article also reviews the industrial applications and future scope of these cast alloys in the automobile and marine industries.