Hao Zan

Dr. Hao Zan

Jiangsu University of Science and Technology

Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
29 October 2022 in Machines
Verified
Journal Article
Open access
PDF file
JZjunlong Zhang
junlong Zhang
YHYin Hu
Yin Hu
JJJie Jiang
Jie Jiang
HZHao Zan
Hao Zan
In order to understand the damping effect and energy dissipation mechanism of the obstacle grid particle dampers, we conduct experimental and simulated studies. In this paper, the obstacle grid particle dampers are applied to the cantilever beam structure. The effect of filling ratio, particle size, particle material and excitation amplitude of the obstacle grid particle damper on the vibration characteristics of the cantilever beam is studied experimentally and compared with the conventional particle damper for damping effect. A simulation model of the particle damper was developed and experimentally validated using the discrete element method. The experimental results show that the vibration acceleration response of the obstacle grid particle damper decreases by 10.4 dB compared with the conventional particle damper at 90% filling ratio. The obstacle grid particle damper increases the area of energy transfer between the external vibration energy and the particles. It makes the particles, which originally have almost no contribution to the energy dissipation, produce violent motion and participate in the energy dissipation process, thus effectively improving the damping performance of the particle dampers.

1 January 2022 in Thermal Science
Verified
Journal Article
Open access
PDF file
MCMantang Chen
Mantang Chen
YHYin Hu
Yin Hu
ZHZhixiong Han
Zhixiong Han
ZPZilong Peng
Zilong Peng
HZHao Zan
Hao Zan
The cooling channel of a scramjet is the fundamental structure of the active thermal protection for an engine. Till now, studies have focused mainly on the steady-state flow and heat transfer process in the cooling channel. However, the vibration intensity of an engine increases sharply as the flight speed increases, because of which, the flow and heat exchange mechanisms based on the cooling channel under stable conditions cannot be applied under vibration. In this study, experimental methods are used to study the characteristics of the forced vibration of a cooling channel on the flow and heat transfer of hydrocarbon fuel at supercritical pressure. In addition, the influences of different vibration frequencies and vibration amplitudes on the flow and heat transfer are analyzed. The research results show that at supercritical pressure, when the fuel temperature is below the critical temperature and the inner wall temperature is above the critical temperature, external vibrations would enhance the heat transfer characteristics of the cooling channel. However, when the pressure and temperature are unstable, the forced vibration of the cooling channel would suppress the instability of temperature and pressure while strengthening the heat exchange.

1 January 2023 in Thermal Science
Verified
Journal Article
Open access
PDF file
YHYuxiang Han
Yuxiang Han
MCMantang Chen
Mantang Chen
ZPZilong Peng
Zilong Peng
ZHZhixiong Han
Zhixiong Han
HZHao Zan
Hao Zan
In this study, experimental methods are used to investigate the effects of different vibration and pressure parameters on heat transfer performance are analyzed. The results show that at a subcritical pressure (0.1 MPa), the external vibration begins to affect the heat transfer when the fuel passes the phase-change point and becomes gaseous. At a near-critical pressure (3 MPa), the external vibration de-teriorates the heat transfer of fuel across the critical-temperature zone. At the su-percritical pressure (5 MPa), the external vibration intensifies the heat transfer in the hot end of the channel only when the fuel is below the critical temperature and the internal wall is above the critical pressure. Combined with data analysis, it can be seen that the external vibration mainly acts on the temperature bounda-ry layer of the fuel oil to affect the wall temperature and heat transfer coefficient.

6 July 2024 in Sensors
Verified
Journal Article
Open access
PDF file
FHFuji Huang
Fuji Huang
LYLiang Yan
Liang Yan
CHABI CHRISTIAN MONSIACHABI CHRISTIAN MONSIA
CHABI CHRISTIAN MONSIA
XHxiang yu Han
xiang yu Han
JLJiabao Liu
Jiabao Liu
HZHao Zan
Hao Zan
This study examines the impact of axial clearance variations on the performance characteristics of a dual-rotor flowmeter (DRT-FM) through numerical simulations, with the validity of the numerical results verified by calibration experiments. The results indicate that within the range of 200 L/h to 1600 L/h, the K factors of different groups increase as clearance increases. The K factor of the 0.80 mm group is the largest, showing an average increase of around 6% compared to that of the 0.50 mm group. Additionally, Linearity E also decreased, with a minimum of 1.07% in the 0.65 mm group, significantly lower than the 3.33% in the 0.50 mm group. Furthermore, the pressure loss increased slightly, with the 0.65 mm group having the largest pressure loss; however, at a flow rate of 1600 L/h, the pressure loss only increases by 0.186 kPa compared to that of the 0.50 mm group. Flow field analysis reveals that changes in axial clearance predominantly affect pressure distribution. Larger clearances reduce low-pressure regions on upstream and downstream transition surfaces, thereby reducing energy loss due to pressure changes. Entropy analysis further demonstrates that higher axial clearance decreases energy loss in the upstream and downstream stationary domains, optimizing the DRT-FM’s energy characteristics.

26 June 2024 in Processes
Verified
Journal Article
Open access
PDF file
JLJiabao Liu
Jiabao Liu
ZZZhibin Zhang
Zhibin Zhang
BWBing Wang
Bing Wang
XHxiang yu Han
xiang yu Han
FHFuji Huang
Fuji Huang
HZHao Zan
Hao Zan
Flow meters are extensively utilized in fields such as chemical engineering, petroleum, and aerospace, and are an indispensable component of modern industry. This paper examines the metrological properties of a dual-rotor turbine flow meter within its measurable flow range through experimental approaches and investigates the cavitation flow dynamics within the flow meter using numerical methods. First, the flow characteristics curve of the dual-rotor turbine flow meter was established experimentally, and the accuracy of numerical simulation results was validated. Secondly, the transient characteristics of the cavitation cavity were revealed using the Z-G-B cavitation model and dynamic mesh technology. Finally, entropy production theory was applied to investigate the energy losses caused by cavitation, analyzing the contributions of different types of energy losses during the cavitation process. Flow calibration experiments and numerical simulations reveal an increase in the meter coefficient of the dual-rotor turbine flow meter in high-flow cavitation zones, indicating that the displayed flow rate is slightly higher during cavitation compared to non-cavitating flows. Transient cavitation flow undergoes three stages: attachment, development, and collapse. At 323 K, the volume fractions of upstream and downstream cavities increase by 38.9% and 48.3%, respectively, with the cavitation cycle duration being 1.21 times that at 298 K. At 343 K, these increases are 75.3% and 239.2%, with the cycle duration being 2.63 times that at 298 K. Among the various sources of loss, the contribution from losses due to pulsating velocity gradients is the most significant, with maximum proportions of 81.95%, 85.1%, and 87.11% at 298 K, 323 K, and 343 K, respectively.

18 March 2026 in Applied Sciences
Verified
Journal Article
Open access
PDF file
YXYifan Xue
Yifan Xue
LTLi Tang
Li Tang
HZHao Zan
Hao Zan
CQChen Qiang
Chen Qiang
Statistical Energy Analysis (SEA) requires a physically meaningful subsystem definition, whereas manual partitioning of complex shell structures is often time-consuming and strongly dependent on engineering experience. To address this issue, this study proposes an automatic initial subsystem partitioning framework for shell FE models based on explicit prior attributes available in the model definition. The method unifies four classes of physical discontinuities—geometric discontinuity, thickness discontinuity, material/property discontinuity, and topological discontinuity—within a single adjacency evaluation procedure. The shell FE mesh is represented through element adjacencies, and adjacencies crossing any identified physical discontinuity are removed so that the remaining connected components define the partitioned subsystems. In this way, the framework generates partitioning results with explicit boundaries and traceable origins without relying on posterior response-field analysis or manually prescribed subsystem boundaries. Because the procedure operates directly on existing large-scale shell FE models and does not require additional response-feature construction or complex pre-partitioning, it provides a lightweight, repeatable, and practically executable automation path for SEA-related front-end modeling. The resulting partitions are intended as physically explicit initial partitioning results that provide a reliable boundary basis for higher-level statistical modeling objectives. When a coarser subsystem representation is required for subsequent modeling, further aggregation may be introduced as an optional enhancement according to the modeling objective, rather than as a prerequisite for the validity of the present method.