To Address the issue of broadband perfect sound absorption failure caused by area coupling effects in acoustic metamaterials, particularly during transitions from narrowband to broadband, this study proposes a novel structure termed ‘bending channel Helmholtz coupled sound absorber’ (BCSA), which considers the area coupling effect. First, theoretical models for the bending channels and Helmholtz resonator (HR) structures are developed using the thermal viscoelastic equivalent theory. Finite element analysis is then employed to validate the accuracy of these models. Based on the aforementioned models, the influence of the geometric parameters of the HR and bending channels on acoustic absorption performance is systematically investigated. Considering both geometric parameter tuning and the area coupling effects among units, a theoretical model of the BCSA composed of multiple bending channels and HR units is constructed. An optimized design of a BCSA metastructure with a thickness of only 35 mm exhibits an absorption coefficient exceeding 0.8 within the frequency range of 288–365 Hz. Subsequently, the mechanisms underlying the high-performance low-frequency broadband absorption of the BCSA metastructure are analyzed using finite element simulations, confirming the validity of the theoretical model. Finally, a 35-mm-thick BCSA sample is fabricated using 3D printing . Impedance tube experiments demonstrate that the optimized BCSA attains an absorption coefficient above 0.8 across the frequency range of 294–364 Hz.Compared with existing bending channels or HR metamaterials, this study transforms the detrimental area coupling side effects into a design advantage. While traditional methods achieve bandwidth broadening by increasing the number or thickness of units, often causing impedance mismatches the BCSA leverages impedance increments generated by parallel non-ideal units to counterbalance each unit’s intrinsic loss. The study clarifies the role of area coupling in sound absorption, offering theoretical insights for mitigating excessive loss damage in multi-unit coupling and offering guidance for the design of low-frequency broadband perfect sound absorption metamaterials.
Traditional Helmholtz resonators are limited by their narrow bandwidth. Although a single rough neck can enhance acoustic energy loss, its ability to expand bandwidth is limited. By contrast, multi-neck structures can broaden the bandwidth but require stringent parameter matching and have complex configurations. Here, to address the issue of the narrow effective sound absorption bandwidth of traditional Helmholtz resonators, a parallel Helmholtz array structure with embedded rough necks and small back cavities (HARNB) is proposed, which achieves broadband and high-efficiency sound absorption through a weakly coupled inter-unit resonance system. Finite-element simulations are used to analyze the design principles and sound absorption mechanisms of HARNB, explore the influence of neck radius, length, relative roughness, and relative wavenumber on the sound absorption coefficient, and elucidate the physical mechanisms underlying these parameter effects. The acoustic absorption performance of HARNB is evaluated under both strong and weak coupling conditions. The results indicate that when each unit operates as an ideal absorber, the absorption coefficient of HARNB decreases significantly to ~ 0.6 under strong coupling. In the weakly coupled system, the absorption coefficient of a single unit is ~ 0.6, and its absorption performance is poor when it operates independently. However, weak coupling among units significantly improves the overall absorption efficiency, achieving high-efficiency absorption ( > 0.8) with a 56-Hz bandwidth in the 261–317 Hz range. The structure’s high-efficiency sound absorption is confirmed by replacing rough necks with smooth ones and conducting experimental tests on HARNB. The experimental results show that HARNB exhibits a high-efficiency sound absorption bandwidth of 257–323 Hz. HARNB provides broadband, high-efficiency sound absorption without requiring precise parameter matching, offering a novel approach for developing broadband acoustic absorbers. This has important implications for applications such as architectural noise reduction and industrial sound insulation.
To address low-frequency vibration and noise issues in ship grating structures, this study proposes a novel acoustic optimization design method based on modulating flexural wave bandgap characteristics. By establishing an equivalent periodic spring-mass coupled beam model to predict bandgap properties, its effectiveness is validated through numerical simulations and experimental testing. By selectively enhancing longitudinal stiffness while weakening transverse components, the bandgap characteristics are effectively tuned to target frequency bands. This approach achieves an 8.2 dB noise reduction at the 31.4 Hz natural frequency. The results demonstrate that bandgap-based design provides a numerically and experimentally validated solution for low-noise ship structures.
This study investigates the sound insulation performance of an anechoic chamber, exploring the influence patterns of different multilayer material combinations on wall sound insulation characteristics. Based on sound transmission theory, a predictive model for multilayer material wall sound insulation was established. The finite element method was employed to simulate the sound propagation characteristics of walls and glass doors with various material combinations. After validating the simulation results through a double-room method experiment, the material combination scheme for the anechoic chamber walls and glass doors was optimized. Based on this, a 1000 mm × 1000 mm × 2300 mm soundproof room prototype was designed and constructed. Its sound insulation performance under reverberant conditions was tested using the insertion loss method and compared with simulation data. Simultaneously, a hybrid calculation method combining low-frequency finite element analysis with high-frequency statistical energy analysis enabled precise and efficient prediction of the overall sound insulation performance of the soundproof room. Research revealed that single-pane glass with thicknesses between 5 and 20 mm conformed to the mass law, with sound insulation increasing by an average of 0.8 dB per additional millimeter. The 10 mm single-pane glass emerged as the optimal choice for the soundproof room’s glass door due to its ideal thickness and excellent low-to-mid-frequency sound insulation. The optimized wall structure featured compact thickness, outstanding low-frequency sound insulation, and balanced mid-to-high-frequency performance. Simulation and experimental results for the core frequency range of 63–1000 Hz showed high consistency, which validates the reliability of the theoretical model and simulation methodology within this frequency band. The deviation of simulation results from experimental data in the frequency range above 1000 Hz is mainly caused by acoustic leakage due to experimental sealing defects, and the high-frequency simulation results are only used for trend analysis rather than conclusion support. This study identifies the optimal multi-layer material combination for soundproof rooms, providing practical material strategies for acoustic design. It also reveals the sound insulation mechanisms of multi-layer composite structures. The findings offer significant reference for optimizing soundproofing materials and structures in architectural acoustics and transportation noise control.
Statistical Energy Analysis (SEA) requires a physically meaningful subsystem definition, whereas manual partitioning of complex shell structures is often time-consuming and strongly dependent on engineering experience. To address this issue, this study proposes an automatic initial subsystem partitioning framework for shell FE models based on explicit prior attributes available in the model definition. The method unifies four classes of physical discontinuities—geometric discontinuity, thickness discontinuity, material/property discontinuity, and topological discontinuity—within a single adjacency evaluation procedure. The shell FE mesh is represented through element adjacencies, and adjacencies crossing any identified physical discontinuity are removed so that the remaining connected components define the partitioned subsystems. In this way, the framework generates partitioning results with explicit boundaries and traceable origins without relying on posterior response-field analysis or manually prescribed subsystem boundaries. Because the procedure operates directly on existing large-scale shell FE models and does not require additional response-feature construction or complex pre-partitioning, it provides a lightweight, repeatable, and practically executable automation path for SEA-related front-end modeling. The resulting partitions are intended as physically explicit initial partitioning results that provide a reliable boundary basis for higher-level statistical modeling objectives. When a coarser subsystem representation is required for subsequent modeling, further aggregation may be introduced as an optional enhancement according to the modeling objective, rather than as a prerequisite for the validity of the present method.