Functional gold surfaces are of great interest in the field of biosensors, since reactions taking place at such surfaces are easily detected and can be applied in numerous applications. Nanotubes (NTs) have been explored as modifying nanostructuration agents for quartz crystal microbalance (QCM) electrodes. Two goals must be achieved in this study. First, preparation of functional NTs which are able to bind to the gold surface; second, these NTs should have an additional functional group which will bind biological markers. Functional silica nanotubes (SNTs) have great potential in various applications due to their biocompatibility and ability to bind functional groups in a covalent manner using various silica based linkers. Although many publications deal with the introduction of functional groups onto the SNT surface, at present there are no reports in the literature regarding core–shell morphology with a functional polymer shell, which is covalently linked to SNTs. Furthermore, such functional core–shell SNTs can be further modified by other functional groups like amines or thiols by a 2nd step functionalization. This fact gives rise to an orthogonal nanocomposite (NC) that can be used as the essential modification component of QCM electrodes for the detection of biological markers.
Inorganic nanotubes (INTs) and fullerene-like nanoparticles (NPs) of WS2/MoS2 penetrate and exfoliate at the contact interface and facilitate tribofilm formation. While the tribological properties are greatly improved by exfoliated NPs that shed easily, they may be diminished by agglomeration in oil. Therefore, surface functionalization is employed to improve dispersion in oil-based suspensions. Here, WS2 INTs were functionalized by polytetrafluoroethylene (PTFE) in a simple and cost-effective bath sonication method. WS2-INTs with two concentrations of added PTFE were characterized by scanning and transmission electron microscopy, micro-Raman spectroscopy, and thermogravimetric analysis. Superior distribution of WS2 was observed before and during friction experiments. Chemical analysis showed a significantly greater amount of PTFE-coated INTs on rubbed surfaces, in accordance with the improved friction and wear properties.