Biofuels, as a renewable, eco-friendly, and cost-effective energy source, can reduce the dependence on fossil fuels. The researchers considered different approaches for obtaining high biodiesel yields from microalgae biomass. This work aims to present an overview of the feasibility of microalgae use in biodiesel production. Therefore, biodiesel production from microalgae oil via the transesterification process was explained in detail. The application of non-catalytic transesterification and catalytic transesterification was reviewed. The achievements in the application of homogenous catalysts, heterogeneous catalysts, and enzymatic catalysts for microalgae oil transesterification were discussed. The present technologies for biodiesel production from microalgae need more improvements to increase their efficiencies and reduce costs. Therefore, future research should focus on the development of effective catalysts for biodiesel production from microalgae biomass.
Rehabilitation of contaminated soils is a complex and time-consuming procedure. One of the most cost-effective and easy-to-use soil remediation approaches is the use of amendments that stabilize the potential toxic elements (PTE) in soil by reducing their mobility and bioavailability. The stabilization of Cu, Pb, Zn, Cd, Co, Cr, Ni in a contaminated soil using 5% and 10% amendment with thermally treated natural zeolite was investigated using a sequential extraction procedure, contamination and environmental risk factors. The results showed that after amendment, the PTE concentration decreased in the exchangeable and reducible fractions and increased in the oxidizable and residual fractions. The highest immobilization effect, consisting in the decrease of exchangeable fractions with 69% was obtained in case of 10% zeolite amendment and 90 days of equilibration time for Pb; also, more than half of the mobile fraction was immobilized in case of Zn, Cu, and Co and about one third in case of Ni, Cr, and Cd. Generally, the immobilization effect of the 5% and 10% amendment is comparable, but a higher equilibration time enhanced the immobilization effect, especially in the case of Cd, Co, Cu, Pb, and Zn.
30 June 2021 in Studia Universitatis Babeș-Bolyai Chemia
The paper presents the validation of a method for the determination of exchangeable cations (K+, Na+, Ca2+ and Mg2+) in zeolites by inductively coupled plasma optical emission spectrometry (ICP-OES), after extraction in ammonium chloride solution. Amongst the analytical techniques that can be used for exchangeable cations measurement, ICP-OES provides rapid, robust, multi-element analysis on a wide range of concentrations. The exchange capacity is one of the most important parameters of zeolites since it indicates their adsorption capacity in different processes. Method validation is an essential requirement for testing laboratories in order to provide trustworthy results in accordance with ISO/IEC 17025:2017 standard. The main figures of merit were studied, and the measurement uncertainty was assessed. The selectivity assay showed no significant non-spectral matrix effect. The linearity study was conducted for the calibration curves in the range of 0.02–20 mg L−1 for each exchangeable cation. Limits of quantification were 0.005 mEq 100 g-1 for Na+, 0.011 mEq 100 g-1 for Mg2+, 0.002 mEq 100 g-1 for K+, 0.003 mEq 100 g-1 for Ca2+. Relative standard deviations of repeatability (RSDr) (n=6 parallel samples) were 4.50 % for Na+, 4.43 % for Mg2+, 6.55 % for K+ and 5.53 % for Ca2+. Recoveries (%) estimated using a certified reference material (CRM BCS-CRM 375/1), for total content of cation oxides were in the range 92–103 %. Fourteen zeolite samples from Racos deposit, Romania were analysed, and according to the chemical composition and X-ray diffraction the main mineral in zeolitic tuffs is clinoptilolite-type. The obtained figures of merit demonstrate that the method has a suitable level of precision and accuracy for the intended purpose.
30 June 2021 in Studia Universitatis Babeș-Bolyai Chemia
In the present study, the use of chicken manure leachate (CML) as a nutrient source for the cultivation of Chlorella spp. at laboratory scale was investigated. The concentration of total organic carbon (TOC) and biochemical oxygen demand (BOD) was monitored during 15 days of cultivation in CML. The changes of pH, conductivity, Cl-, PO43-, SO42-, NO2- and NO3- concentrations were measured during the growth period. The BOD and TOC reduction was 96.4% and 86.1%, respectively after 15 days of cultivation in CML. The Chlorella spp. biomass cultured in CML had a high protein content compared to the biomass grown in the BG-11 medium. The obtained results suggest the potential use of CML as a nutrient source for the growth of Chlorella spp.
30 June 2021 in Studia Universitatis Babeș-Bolyai Chemia
Taguchi experimental design was used to optimize the experimental parameters for Au sorption from ammoniacal thiosulfate solutions containing 2 mg/L Cu complexed as cuprous thiosulfate [Cu(S2O3)3]5− onto anion exchange fiber (METALICAPT® MFH11). An L9 orthogonal array was chosen to study the effect of three parameters, namely Au initial concentration (10-30 mg/L), fiber quantity (0.05-0.55 g) and temperature (20-30°C). The sorption tests were carried out in batch mode at a stirring rate of 500 rpm and pH of 9.3. The experimental data were processed using signal-to-noise ratio and the analysis of variance was used to determine the most significant parameters. The optimal conditions for Au sorption were found to be 30 mg/L Au concentration, 0.05 g of fiber and temperature of 20°C. The obtained results indicated fiber quantity as the most influential parameter on Au sorption with a contribution of 66%, followed by Au initial concentration with a contribution of 33%. In the optimal conditions, the sorption capacity of the fiber was found to be 16.8 mg/g, in good agreement with the predicted result by Taguchi method (16.7 mg/g). Further investigations are necessary to examine the elution behavior of gold from the fiber.
30 June 2021 in Studia Universitatis Babeș-Bolyai Chemia
Nanotechnology is an attractive and challenging science focused on the materials at nanoscale level and their employment in a wide variety of applications. Its applications in (nano)medicine are constrained due to the main concerns in understanding and predicting the behavior of nanoparticles (NPs) in complex biological fluids. The properties of NPs can be strongly influenced by the surrounding conditions, such as pH and composition, in terms of aggregation status, chemical reactivity and surface chemistry. In this regard, this review intents to provide some insight into the performance of complex biological fluids associated with nanomaterials. In particular, the behavior of AgNPs and AuNPs in simulated biological fluids that must be addressed to develop an appropriate system for medical applications, from a chemical perspective, mostly related to the physico-chemical characteristics of NPs and simulated biological fluids and their possible interactions (mechanisms) was considered. Furthermore, the fate of AgNPs and AuNPs during the gastrointestinal transit from an in vivo experimental perspective, as well as their potential impact on gut microbiota was also systematized.