This paper presents the synthesis of metal doped Co ferrites, M_0.2Co_0.8Fe₂O₄ (M = Cu²⁺, Ni²⁺, and Zn²⁺) embedded in SiO₂ matrix by an innovative sol-gel route. The structural and morphological characterization provided information about the crystalline phases, crystallite size, and the shape of the prepared ferrites. The thermal study depicted the thermal decomposition and stability of the obtained ferrites. X-ray diffraction indicated nanocrystalline ferrites with spinel structure and the lack of crystalline phase impurities, while Fourier transform infrared spectroscopy revealed the presence of functional groups in precursors and ferrite powders. The lattice parameters showed a gradual increase indicating a uniform distribution of divalent metal ions in the Co ferrite lattice. The crystallite size, magnetic moment, super-exchange and deflection of magnetic domain were influenced by the dopant metal ion. The room temperature magnetization indicated a ferromagnetic behavior of the ferrites annealed at 1000 °C and a superparamagnetic behavior of the ferrites annealed at 700 °C.

The radionuclides of cesium (Cs) and strontium (Sr) are dangerous products of nuclear fission that can be accidentally released into wastewater. In the present work, the capacity of thermally treated natural zeolite (NZ) from Macicasu (Romania) to remove Cs⁺ and Sr²⁺ ions from aqueous solutions in batch mode was investigated by contacting different zeolite quantities (0.5, 1, and 2 g) of 0.5–1.25 mm (NZ1) and 0.1–0.5 mm (NZ2) particle size fractions with 50 mL working solutions of Cs⁺ and Sr²⁺ (10, 50, and 100 mg L⁻¹ initial concentrations) for 180 min. The concentration of Cs in the aqueous solutions was determined by inductively coupled plasma mass spectrometry (ICP-MS), whereas the Sr concentration was determined by inductively coupled plasma optical emission spectrometry (ICP-OES). The removal efficiency of Cs⁺ varied between 62.8 and 99.3%, whereas Sr²⁺ ranged between 51.3 and 94.5%, depending on the initial concentrations, the contact time, the amount, and particle size of the adsorbent material. The sorption of Cs⁺ and Sr²⁺ was analyzed using the nonlinear form of Langmuir and Freundlich isotherm models and pseudo-first-order (PFO) and pseudo-second-order (PSO) kinetic models. The results indicated that the sorption kinetics of Cs⁺ and Sr²⁺ on thermally treated natural zeolite was described by the PSO kinetic model. Chemisorption dominates the retention of both Cs⁺ and Sr²⁺ by strong coordinate bonds with an aluminosilicate zeolite skeleton.

Increased concentrations of heavy metals in the environment are of public health concern, their removal from waters receiving considerable interest. The aim of this paper was to study the simultaneous adsorption of heavy metals (Cu, Cd, Cr, Ni, Zn and Pb) from aqueous solutions using the zeolitic volcanic tuffs as adsorbents. The effect of thermal treatment temperature, particle size and initial metal concentrations on the metal ions sorption was investigated. The selectivity of used zeolite for the adsorption of studied heavy metals followed the order: Pb > Cr > Cu > Zn > Cd > Ni. The removal efficiency of the heavy metals was strongly influenced by the particle sizes, the samples with smaller particle size (0–0.05 mm) being more efficient in heavy metals removal than those with larger particle size (1–3 mm). Generally, no relevant changes were observed in heavy metals removal efficiency for the treatment temperatures of 200 °C and 350 °C. Moreover, at a higher temperature (550 °C), a decrease in the removal efficiencies was observed. The Cd, Zn, Cu, Cr, Zn and Ni sorption was best described by Langmuir model according to the high values of correlation coefficient. The pseudo-first-order kinetic model presented the best correlation of the experimental data.

Biofuels, as a renewable, eco-friendly, and cost-effective energy source, can reduce the dependence on fossil fuels. The researchers considered different approaches for obtaining high biodiesel yields from microalgae biomass. This work aims to present an overview of the feasibility of microalgae use in biodiesel production. Therefore, biodiesel production from microalgae oil via the transesterification process was explained in detail. The application of non-catalytic transesterification and catalytic transesterification was reviewed. The achievements in the application of homogenous catalysts, heterogeneous catalysts, and enzymatic catalysts for microalgae oil transesterification were discussed. The present technologies for biodiesel production from microalgae need more improvements to increase their efficiencies and reduce costs. Therefore, future research should focus on the development of effective catalysts for biodiesel production from microalgae biomass.

The objective of this study was to determine the chemical composition of five different food seeds (sunflower, poppy, hemp, flax and sesame) regarding fatty acid, mineral (Fe, Cu, Zn, Na, Mg, K, Ca, Al) and protein content. In addition, the total antioxidant capacity of the seeds was evaluated using the photochemiluminescent assay. The food seeds were subjected to lipid extraction and converted into fatty acid methyl esters before the gas chromatography analysis. In all food seeds, the saturated (SFAs), monounsaturated (MUFAs) and polyunsaturated fatty acids (PUFAs) were identified, respectively. PUFAs were the most abundant fatty acids (61.2% ± 0.07% and 84.8% ± 0.08% of total fatty acids), with the highest content in flax and hemp seed oil. Also, high amounts of omega-3 from PUFAs were determined in flax and hempseed oil. Based on the obtained results the sunflower, sesame and poppy seeds are good sources of omega-6, while flax and hemp seeds are good sources of omega-3. All samples are rich in minerals (Na, K, Ca, Mg) and have more than 20% protein content.

In the present study, the sorption behavior of iron (Fe) and manganese (Mn) from a binary metal solution system onto thermally activated natural zeolite was studied. Batch adsorption experiments were carried out to investigate the effects of zeolite quantity, particle size, and activation temperature. Equilibrium studies were carried out to evaluate the adsorption capacity of the thermally activated natural zeolite. The obtained results showed that the thermally activated natural zeolite favored the removal of Fe over Mn, due to competition between them. Elemental analysis of the activated zeolite samples obtained by energy-dispersive X-ray analysis (EDX) indicated a Si/Al ratio >4, which is specific for clinoptilolite-type zeolite. The removal of Fe and Mn was best described by the Langmuir model, indicating the formation of a monolayer on the surface of the activated natural zeolite. The kinetic results revealed that the experimental data were best fitted by the pseudo-second-order model for both metals. The results suggest that a new natural zeolite from Rupea quarry, Brașov County, Romania could be used as a potential adsorbent for removal of Fe and Mn from binary metal solution systems, addressing the lack of information about this material from this region.