In this study, bauxite residue was directly leached using the Brønsted acidic ionic liquid 1-ethyl-3-methylimidazolium hydrogensulfate. Stirring rate, retention time, temperature, and pulp density have been studied in detail as the parameters that affect the leaching process. Their optimized combination has shown high recovery yields of Sc, nearly 80%, and Ti (90%), almost total dissolution of Fe, while Al and Na were partially extracted in the range of 30–40%. Si and rare earth element (REEs) dissolutions were found to be negligible, whereas Ca was dissolved and reprecipitated as CaSO₄. The solid residue after leaching was fully characterized, providing explanations for the destiny of REEs that remain undissolved during the leaching process. The solid residue produced after dissolution can be further treated to extract REEs, while the leachate can be subjected to metal recovery processes (i.e., liquid–liquid extraction) to extract metals and regenerate ionic liquid.

The aim of this work was to achieve an understanding of the distribution of selected bauxite trace elements (gallium (Ga), vanadium (V), arsenic (As), chromium (Cr), rare earth elements (REEs), scandium (Sc)) in the Bayer process. The assessment was designed as a case study in an alumina plant in operation to provide an overview of the trace elements behaviour in an actual industrial setup. A combination of analytical techniques was used, mainly inductively coupled plasma mass spectrometry and optical emission spectroscopy as well as instrumental neutron activation analysis. It was found that Ga, V and As as well as, to a minor extent, Cr are principally accumulated in Bayer process liquors. In addition, Ga is also fractionated to alumina at the end of the Bayer processing cycle. The rest of these elements pass to bauxite residue. REEs and Sc have the tendency to remain practically unaffected in the solid phases of the Bayer process and, therefore, at least 98% of their mass is transferred to bauxite residue. The interest in such a study originates from the fact that many of these trace constituents of bauxite ore could potentially become valuable by-products of the Bayer process; therefore, the understanding of their behaviour needs to be expanded. In fact, Ga and V are already by-products of the Bayer process, but their distribution patterns have not been provided in the existing open literature.

Experimental work has been performed to investigate the precipitation mechanism of aluminum hydroxide phases from sodium aluminate/sodium carbonate pregnant solutions by carbon dioxide gas purging. Such solutions result from leaching calcium aluminate slags with sodium carbonate solutions, in accordance with the Pedersen process, which is an alternative process for alumina production. The concentration of carbonate ions in the pregnant solution is revealed as a key factor in controlling the nature of the precipitating phase. Synthetic aluminate solutions of varying sodium carbonate concentrations, ranging from 20 to 160 g/L, were carbonated, and the resulting precipitating phases were characterized by X-ray diffraction analysis. Based on the results of the previous carbonation tests, a series of experiments were performed in which the duration of carbonation and the aging period of the precipitates varied. For this work, a synthetic aluminate solution containing 20 g/L free Na₂CO₃ was used. The precipitates were characterized with X-ray diffraction analysis and Fourier-transform infrared spectroscopy.