Chandrasekaran Selvam

Dr. Chandrasekaran Selvam

Mechanical Engineering, SRM Institute of Science and Technology, Chennai, India
orcid
Associate Professor

Research Focus & Metrics

Academic Career Length

11Years (2016-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
9 September 2019 in Energies
Verified
Journal Article
Open access
PDF file
RPRajendran Prabakaran
Rajendran Prabakaran
SSSHAJI SIDNEY
SHAJI SIDNEY
MDMohan lal D
Mohan lal D
Chandrasekaran SelvamChandrasekaran Selvam
Chandrasekaran Selvam
SHSivasankaran Harish
Sivasankaran Harish
In this work, we experimentally investigated the solidification behavior of functionalized graphene-based phase change nanocomposites inside a sphere. The influence of graphene nanoplatelets on thermal transport and rheological characteristics of the such nanocomposites were also discussed. We adopted the covalent functionalization method to prepare highly stable phase change nanocomposites using commercially available phase change material (PCM) OM08 as the host matrix and graphene nanoplatelets (GnPs) with 0.1, 0.3, and 0.5 volume percentage as the nano inclusions. We report a maximum thermal conductivity enhancement of ~102 and ~46% with 0.5 vol% in the solid and liquid states, respectively. Rheological measurements show that the pure PCM shows Newtonian behavior, whereas the inclusion of GnPs leads to the transition to non-Newtonian behavior, especially at lower shear rates. Viscosity of the nanocomposite increases with an increase in the volume fraction of GnP. For 0.5 vol% of GnPs, maximum increase in viscosity was found to be ~37% at a shear rate of 1000 s−1. Time required for complete solidification decreases with the loading of GnPs. Maximum reduction in solidification time with 0.5 vol% of GnPs was ~40% for bath temperature of −10°C.

29 November 2016 in Fullerenes, Nanotubes and Carbon Nanostructures
Verified
Journal Article
Closed access
Chandrasekaran SelvamChandrasekaran Selvam
Chandrasekaran Selvam
SHSivasankaran Harish
Sivasankaran Harish
DLD. Mohan Lal
D. Mohan Lal
In this study, we report the effective thermal conductivity and rheological behavior of ethylene glycol with single-walled carbon nanohorn inclusions. The thermal conductivity and viscosity was found to increase with respect to nanohorn loading. Maximum thermal conductivity enhancement of ∼11% at a nanohorn loading of 1.5 vol% was obtained in this study. The viscosity of nanofluids increase with respect to nanohorn loading and decreases with respect to shear rate which indicates the non-Newtonian shear thinning behavior at higher nanohorn loading. Finally, the effectiveness of nanofluids was calculated for laminar and turbulent regions to predict the heat transfer performance and favorability of these nanofluids. The present nanofluids are favorable upto 0.1 vol% in the laminar region. However, these nanofluids are not favorable for turbulent region and loadings beyond 0.1 vol% due to higher viscosity enhancement.

15 March 2019 in Applied Sciences
Verified
Journal Article
Open access
PDF file
SSSHAJI SIDNEY
SHAJI SIDNEY
MDMohan lal D
Mohan lal D
Chandrasekaran SelvamChandrasekaran Selvam
Chandrasekaran Selvam
SHSivasankaran Harish
Sivasankaran Harish
In the present work, the freezing and melting characteristics of water seeded with chemically functionalized graphene nanoplatelets in a vertical cylindrical capsule were experimentally studied. The volume percentage of functionalized graphene nanoplatelets varied from 0.1% to 0.5% with an interval of 0.1%. The stability of the synthesized samples was measured using zeta potential analyzer. The thermal conductivity of the nanocomposite samples was experimentally measured using the transient hot wire method. A ~24% (maximum) increase in the thermal conductivity was observed for the 0.5% volume percentage in the liquid state, while a ~53% enhancement was observed in the solid state. The freezing and melting behavior of water dispersed with graphene nanoplatelets was assessed using a cylindrical stainless steel capsule in a constant temperature bath. The bath temperatures considered for studying the freezing characteristics were −6 °C and −10 °C, while to study the melting characteristics the bath temperature was set as 31 °C and 36 °C. The freezing and melting time decreased for all the test conditions when the volume percentage of GnP increased. The freezing rate was enhanced by ~43% and ~32% for the bath temperatures of −6 °C and −10 °C, respectively, at 0.5 vol % of graphene loading. The melting rate was enhanced by ~42% and ~63% for the bath temperatures of 31 °C and 36 °C, respectively, at 0.5 vol % of graphene loading.

Verified
Journal Article
Open access
PDF file
JPJidhesh P
Jidhesh P
BPBanumathi Munuswamy Swami Punniakodi
Banumathi Munuswamy Swami Punniakodi
Chandrasekaran SelvamChandrasekaran Selvam
Chandrasekaran Selvam
Ramalingam SenthilRamalingam Senthil
Ramalingam Senthil
Thermal energy storage systems store intermittent solar energy to supply heat during non-solar hours. However, they often exhibit poor thermal conductivity, hindering efficient energy storage and release. The purpose of this study is to enhance the phase change characteristics of a paraffin wax-based latent heat energy storage system using a hybrid nanocomposite while increasing its thermal conductivity. Present heat storage systems integrate nanomaterials into a phase change material (paraffin wax) for faster energy storage and release in the form of heat. Steatite and copper oxide are chosen as nanomaterial additives in this experimental investigation. The charging and discharging characteristics of latent heat energy storage systems are studied using four different cases involving pure paraffin wax (case 1), paraffin wax with 10 wt% steatite (case 2), paraffin wax with 10 wt% copper oxide (case 3), and 5 wt% steatite with 5 wt% copper oxide (case 4). The charging and discharging rates were studied. The solidification rate of the nanocomposite improved with the addition of nanomaterials. The paraffin wax with 10 wt% copper oxide (case 3) outperformed the other cases, showing the best heat transfer ability and achieving an overall fusion time of 90 min. Case 3 was found to be the most thermally effective among the other cases. A significant finding of this study is the enhanced thermal performance of paraffin wax-based LHS systems using CuO and steatite nanocomposites, which hold great potential for practical applications. These include solar thermal systems, where efficient energy storage is critical, and industrial heat recovery systems, where optimizing heat transfer and storage can significantly improve energy utilization and sustainability.
1

3 September 2019 in Heat Transfer Engineering
Verified
Journal Article
Closed access
ASAyyamperumal Lalitha Saravanan
Ayyamperumal Lalitha Saravanan
DLDhasan Mohan Lal
Dhasan Mohan Lal
Chandrasekaran SelvamChandrasekaran Selvam
Chandrasekaran Selvam
HC-290 is a promising alternative for HCFC-22, which is an ozone depleting substance under Montreal Protocol. However, HC-290 charge is to be reduced because of its flammability. The objective of this study was to reduce the charge quantity of HC-290 in a split air conditioner, which was originally designed for HCFC-22. The effect of charge reduction on the performance of the HC-290 split air-conditioning system was studied experimentally by varying condenser tube diameter, length of capillary tube, and condenser air face velocity. Initially, simulation study was conducted using ART simulation software. In accordance with the simulation results, a 5.25 kW split air conditioner was modified and experimentally tested with HC-290 in a psychrometric test facility under standard test conditions as per IS 1391 part 2. The condenser tube diameter was reduced from 12.7 mm to 6.35 mm, while the length of capillary tube was increased from 650 mm to 820 mm with enhanced condenser air face velocities. It was found that with 300 g of HC-290 charge, the performance parameters such as cooling capacity, power consumption, and coefficient of performance were better than the baseline test with HCFC-22 in all conditions tested.

12 March 2023 in Energies
Verified
Journal Article
Open access
PDF file
BALAJI TBALAJI T
BALAJI T
DLDhasan Mohan Lal
Dhasan Mohan Lal
Chandrasekaran SelvamChandrasekaran Selvam
Chandrasekaran Selvam
Over the past few years, considerable research work has been performed on the graphene-based nano-dispersion for improvement of the thermal conductivity and thermal characteristics of base fluid. Graphene-based dispersion shows the good stability, better enhancement in thermal conductivity, and heat transport behavior compared to the other nano-dispersions drawing significant attention among researchers. This article carries out comprehensive reviews on the heat transport behavior of graphene-based nano-dispersion over the past ten years. Some researchers have carried out the investigations on the various methods adopted for the preparation of graphene-based nano-dispersion, techniques involved in making good dispersion including stability characterizations. There needs to be a better agreement in results reported by the various researchers, which paves the way for further potential research needs. Some researchers studied thermo-physical properties and heat transport behavior of graphene nanofluids. Only a few researchers have studied the usage of graphene nanofluids in various fields of application, including automobile radiators, electronics cooling, heat exchangers, etc. This article reviews the different challenges faced during its development in broad areas of application, and this could be a referral to have explicit knowledge of graphene dispersions with their characterization. Moreover, this study explores the various parameters that influence the effective thermal conductivity and heat transport behavior of the graphene dispersions for the various heat transport applications, which could be a reference guide to find the potential benefits as well as drawbacks of the graphene-based nano-dispersion for future research works.