Tuning Carbon Nanotube Resonances: Nanoscale resonators can be used in sensing and for processing mechanical signals. Single-walled carbon nanotubes have potential design advantages as resonators in that their oscillatory motion could be coupled to electron transport (see the Perspective by Hone and Deshpande ). Steele et al. (p. 1103 , published online 23 July) and Lassagne et al. (p. 1107 , published online 23 July) report that the resonance frequency of a suspended single-walled carbon nanotube can be excited when operated as a single-electron transistor at low temperatures. Electrostatic forces are set up when the carbon nanotubes charge and discharge. The resonance frequency depends on applied voltages, and the coupling is strong enough to drive the mechanical motion into the nonlinear response regime. Differences in the responses of the devices in the two studies reflect in part the different quality factors of the resonators and different cryogenic temperatures.

We have measured the mechanical properties of few-layer graphene and graphite flakes that are suspended over circular holes. The spatial profile of the flake’s spring constant is measured with an atomic force microscope. The bending rigidity of and the tension in the membranes are extracted by fitting a continuum model to the data. For flakes down to eight graphene layers, both parameters show a strong thickness dependence. We predict fundamental resonance frequencies of these nanodrums in the gigahertz range based on the measured bending rigidity and tension.