In this paper, an algebraic approach for the finite-time feedback control problem is provided for second-order systems where only the second-order derivative of the controlled variable is measured. In practice, it means that the acceleration is the only variable that can be used for feedback purposes. This problem appears in many mechanical systems such as positioning systems and force-position controllers in robotic systems and aerospace applications. Based on an algebraic approach, an on-line algebraic estimator is developed in order to estimate in finite time the unmeasured position and velocity variables. The obtained expressions depend solely on iterated integrals of the measured acceleration output and of the control input. The approach is shown to be robust to noisy measurements and it has the advantage to provide on-line finite-time (or non-asymptotic) state estimations. Based on these estimations, a quasi-homogeneous second-order sliding mode tracking control law including estimated position error integrals is designed illustrating the possibilities of finite-time acceleration feedback via algebraic state estimation.
7 August 2020 in IEEE Transactions on Industrial Electronics
The multifunctional converter system (MFCS) is a special topology of three-phase ac motor drives, which inherently integrates a dc-voltage regulation function. First, in order to explain the mechanism of the MFCS, an average model is derived in this article. An equivalent circuit is developed, which explicitly reveals that the MFCS is equivalent to a cascaded dc/dc converter-dc motor drive system. Second, the inverter's mean duty cycle is identified as an independent control degree of freedom for the dc-bus voltage. Then, the influence of pulsewidth modulation (PWM) on the dc-bus voltage is studied. It concludes that space vector PWM is invalid for the MFCS. To address this problem, the zero-sequence voltage injection PWM (ZSVIPWM) is proposed and actually sinusoidal PWM is a special case of the ZSVIPWM. Third, an overall control strategy is proposed for the MFCS, which includes not only the vector control for the motor but also a closed-loop control for the dc-bus voltage. Finally, comparative experiments with the standard topology are carried out on a permanent magnet synchronous machine prototype to verify these theoretical analyses and the control strategy.
25 January 2018 in IEEE Transactions on Control Systems Technology
In this brief, parallel interconnection of buck (step-down) converters is considered. Classical control of such a topology uniformly distributes load current over branches. Yet, whenever nonidentical converters (having distinct characteristics) are considered, this brief demonstrates, both theoretically and experimentally, that minimizing overall losses requires nonuniform and even load-depend current distribution. In this context, a novel highly modular hierarchical control framework is proposed for arbitrary number of buck converters. Solutions for the two related design steps are given, which lead to a control law minimizing total losses as well as correcting voltage deviation for any operating point and without knowledge about load magnitude. Experimental results support our discussions.
14 January 2021 in IEEE Journal of Emerging and Selected Topics in Industrial Electronics
In this paper, by means of a parametrization leading to a single gain, a tuning method is proposed to simplify the implementation of the well known STA. Furthermore, inspired by ideas from the high-gain observer design, and using a Lyapunov approach, the stability analysis of the closed-loop system is presented. Thanks to a simple Lyapunov function, sufficient condition are obtained to prove the finite-time convergence. Finally, the performances of the proposed strategy are illustrated experimentally on a PMSM using an industrial benchmark for generating the desired trajectories to be tracked, in presence of external disturbances.
15 January 2020 in IEEE Transactions on Control Systems Technology
In this article, parallel interconnection of dc/dc converters is considered. For this topology of converters feeding a common load, it has been recently shown that dynamics related to voltage regulation can be completely separated from the current distribution without considering frequency separation arguments, which inevitably limits achievable performance. Within the Hamiltonian framework, this article shows that this separation between current distribution and voltage regulation is linked to the energy conservative quantities: the Casimir functions. Furthermore, a robust control law is given in this framework to get around the fact that the load might be unknown. In this article, we also ensure that the system converges to the optimal current repartition, without requiring explicit expression of the optimal locus. Finally, resulting control law efficiency is assessed through experimental results.