The parallel connection of dc–dc converters requires the development of an appropriate control strategy that regulates load voltage and shares current among participating converters. This article proposes a resilient and robust cooperative distributed control approach that simultaneously ensures voltage regulation and balanced current sharing in parallel dc–dc converters in the presence of false data injection attacks on control input channels. Based on analytical tools from network control and Lyapunov stability theory, concise stability certificates are derived. The proposed cooperative distributed control strategy guarantees resilience against unknown bounded attacks on the actuators of dc–dc converters and the robustness to uncertainties in load parameters and the physical parameters of converters. Furthermore, the control design for each converter does not require any knowledge about the number of participating converters. The detailed simulation and experimental results verify the satisfactory performance of the proposed method in voltage regulation and balanced current sharing in parallel converters, as well as resilience to bounded false data injection attacks.
This article considers a robust output set-point tracking problem for an $m$ -terminal power flow controller (PFC) for meshed dc micro-grids. The PFC is a power electronics device used to control the power flow at a node in the meshed grid and may act as a dc circuit breaker. The system is modeled by state-space bilinear dynamics coupled with a polynomial output. In the proposed design, the plant is first extended with an integral action processing the regulation error. The cascaded model composed of the plant and the integrator is then stabilized using a saturated state-feedback law, designed with a forwarding approach. An anti-windup function is added to cope with transient saturations. A tuning method is proposed to set the controller gains along the available degrees of freedom with respect to a cost function. The stability of the closed loop is guaranteed for any compact set of initial conditions and for small parametric variations around the nominal set point. Experiments have been carried out and these properties are successfully assessed on a tenth-scale experimental setup.
7 August 2020 in IEEE Transactions on Industrial Electronics
The multifunctional converter system (MFCS) is a special topology of three-phase ac motor drives, which inherently integrates a dc-voltage regulation function. First, in order to explain the mechanism of the MFCS, an average model is derived in this article. An equivalent circuit is developed, which explicitly reveals that the MFCS is equivalent to a cascaded dc/dc converter-dc motor drive system. Second, the inverter's mean duty cycle is identified as an independent control degree of freedom for the dc-bus voltage. Then, the influence of pulsewidth modulation (PWM) on the dc-bus voltage is studied. It concludes that space vector PWM is invalid for the MFCS. To address this problem, the zero-sequence voltage injection PWM (ZSVIPWM) is proposed and actually sinusoidal PWM is a special case of the ZSVIPWM. Third, an overall control strategy is proposed for the MFCS, which includes not only the vector control for the motor but also a closed-loop control for the dc-bus voltage. Finally, comparative experiments with the standard topology are carried out on a permanent magnet synchronous machine prototype to verify these theoretical analyses and the control strategy.
25 January 2018 in IEEE Transactions on Control Systems Technology
In this brief, parallel interconnection of buck (step-down) converters is considered. Classical control of such a topology uniformly distributes load current over branches. Yet, whenever nonidentical converters (having distinct characteristics) are considered, this brief demonstrates, both theoretically and experimentally, that minimizing overall losses requires nonuniform and even load-depend current distribution. In this context, a novel highly modular hierarchical control framework is proposed for arbitrary number of buck converters. Solutions for the two related design steps are given, which lead to a control law minimizing total losses as well as correcting voltage deviation for any operating point and without knowledge about load magnitude. Experimental results support our discussions.
15 January 2020 in IEEE Transactions on Control Systems Technology
In this article, parallel interconnection of dc/dc converters is considered. For this topology of converters feeding a common load, it has been recently shown that dynamics related to voltage regulation can be completely separated from the current distribution without considering frequency separation arguments, which inevitably limits achievable performance. Within the Hamiltonian framework, this article shows that this separation between current distribution and voltage regulation is linked to the energy conservative quantities: the Casimir functions. Furthermore, a robust control law is given in this framework to get around the fact that the load might be unknown. In this article, we also ensure that the system converges to the optimal current repartition, without requiring explicit expression of the optimal locus. Finally, resulting control law efficiency is assessed through experimental results.