Renny Febrida

Mrs. Renny Febrida

orcid

Research Focus & Metrics

Academic Career Length

15Years (2012-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
8 November 2021 in Heliyon
Verified
Journal Article
Open access
RFRenny Febrida
Renny Febrida
SSSetianto Setianto
Setianto Setianto
EHEllyza Herda
Ellyza Herda
Arief CahyantoArief Cahyanto
Arief Cahyanto
IJI Made Joni
I Made Joni
This paper focused on the analysis of the crystal structure and phase transformation of CaCO3 synthesized by simple solution method from 0.5 M Ca(NO3)2 precursor and 0.5 M Na2CO3 precipitant at ambient temperature (300 K). The pH of the sample solution at various reaction times of 5, 10, 15, and 30 min were measured and correlated with the supersaturating condition in the presence of the Na2CO3 which is responsible for vaterite phase formation. The formation of the polymorph structure of obtained CaCO3 powders was characterized using powder X-ray diffraction patterns and their crystal structure and phase transformation were evaluated using the Rietveld refinement method. Moreover, the qualitative analysis of the CaCO3 powders phase was conducted by Fourier Transform Infrared (FTIR) spectroscopy to evaluate the effect of reaction time correlated with their crystal formation. The XRD analysis showed that the vaterite formation was 89 % at a reaction time of 15 min and confirmed also by FTIR that the amount of vaterite increased due to the effect of increasing reaction time. The crystallite size of vaterite was stable at 36 nm at the reaction time of 15 and 30 min. The morphology of the CaCO3 powders obtained from Scanning Electron Microscope (SEM) was spherical with sizes of 2–5 μm. It was highlighted that the supersaturating condition started occurred at a reaction time of 15 min at pH 7.88 which was responsible for vaterite formation took place. It was concluded that the amount of precipitant (Na2CO3) and reaction times play an important role to determine the saturation of carbonate source to allow vaterite phase formation of CaCO3 powders to occur.

7 August 2021 in Materials
Verified
Journal Article
Open access
PDF file
RFRenny Febrida
Renny Febrida
Arief CahyantoArief Cahyanto
Arief Cahyanto
EHEllyza Herda
Ellyza Herda
VMVanitha Muthukanan
Vanitha Muthukanan
NDNina Djustiana
Nina Djustiana
IJI Made Joni
I Made Joni
Appropriately engineered CaCO3 vaterite has interesting properties such as biodegradability, large surface area, and unique physical and chemical properties that allow a variety of uses in medical applications, mainly in dental material as the scaffold. In this paper, we report the synthesis of vaterite from Ca(NO3)2·4H2O without porogen to obtain a highly pure and porous microsphere for raw material of calcium phosphate as the scaffold in our future development. CaCO3 properties were investigated at two different temperatures (20 and 27 °C) and stirring speeds (800 and 1000 rpm) and at various reaction times (5, 10, 15, 30, and 60 min). The as-prepared porous CaCO3 powders were characterized by FTIR, XRD, SEM, TEM, and BET methods. The results showed that vaterite with purity 95.3%, crystallite size 23.91 nm, and porous microsphere with lowest pore diameter 3.5578 nm was obtained at reaction time 30 min, temperature reaction 20 °C, and stirring speed 800 rpm. It was emphasized that a more spherical microsphere with a smaller size and nanostructure contained multiple primary nanoparticles received at a lower stirring speed (800 rpm) at the reaction time of 30 min. One of the outstanding results of this study is the formation of the porous vaterite microsphere with a pore size of ~3.55 nm without any additional porogen or template by using a simple mixing method.

1 January 2025 in Brazilian Dental Journal
Verified
Journal Article
Open access
WMWilman Rante Marampa
Wilman Rante Marampa
NDNina Djustiana
Nina Djustiana
RFRenny Febrida
Renny Febrida
Craniofacial bone defects present a unique challenge due to the complex anatomical and functional demands of the region. Composite bioactive scaffolds have emerged as promising strategies for bone regeneration, combining the structural support of inorganic materials with the biological responsiveness of natural or synthetic polymers. This review discusses recent advancements in composite scaffolds tailored for alveolar and maxillofacial bone repair, with an emphasis on material selection, scaffold architecture, bioactivity, and therapeutic delivery capabilities. Key features, including porosity, mechanical strength, degradation rate, and anatomical adaptability, are evaluated for their clinical relevance. Furthermore, the roles of ion release, surface topography, and incorporation of growth factors or stem cells in modulating osteogenesis, angiogenesis, and immune responses are highlighted. Recent innovations also include dual-functional scaffolds that can promote bone formation while delivering antimicrobial or anti-inflammatory agents. Although most remain in preclinical stages, some composite scaffolds, particularly those based on hydroxyapatite, β-tricalcium phosphate (β-TCP), and bioactive glass, have progressed to clinical applications in dental implantology. The integration of biomimetic cues, 3D printing, and controlled drug release marks a significant step forward in personalized bone tissue engineering.

1 January 2018 in AIP Conference Proceedings
Verified
Conference Paper
Closed access
PDF file
EKE. Karlina
E. Karlina
SSS. Susra
S. Susra
YFY. Fatmala
Y. Fatmala
HHH. M. Hartoyo
H. M. Hartoyo
VTV. Takarini
V. Takarini
IJI Made Joni
I Made Joni
Dental composite as restorative dental materials can be reinforced using ceramic fillers. Homogeneous distribution of filler particles shall improve its mechanical properties. This paper presents the results of the preliminary study on the ZrO2-Al2O3-SiO2 ceramic fillers made from Indonesian natural sand that can increase the mechanical properties of dental composite. The synthesis was done using zirconium silicate sand (ZrSiO4) and aluminium oxide (Al2O3) precursors, which dissolved together with 70:30 weight ratios. Two types of sand were used: (1) manufactured sand (mesh #80) and (2) natural sand (mesh #400). The samples then heated in the furnace at 1100 °C for 8 hours. The morphological characterization was then evaluated using JEOL Scanning Electron Microscope (SEM) for the surface structure that analyze particles size and distribution. Ceramic fillers made from natural sand is homogenous, well distributed with average particle size of 5-10 µm. Comparably, ceramic filler made from the manufactured sand is heterogeneous, poorly distributed and appear as agglomerates with average particle size are 30-50 µm. The results suggest that ceramic fillers made from natural sand demonstrate better character to represent as a functional restorative dental material.

1 May 2025 in Materials Research Express
Verified
Journal Article
Open access
RFRenny Febrida
Renny Febrida
SSSekar Diva Setyanagari
Sekar Diva Setyanagari
RWRevani Widjaya
Revani Widjaya
YFYanwar Faza
Yanwar Faza
FFFerry Faizal
Ferry Faizal
IJI Made Joni
I Made Joni
Natural limestone, known for its high calcium carbonate (CaCO3) content (∼95%) and safety in health applications, is widely used in science and industry. It exists in three forms: calcite, vaterite, and aragonite. Vaterite’s spherical structure, non-toxic nature, biocompatibility, and high porosity is particularly valuable for biomedical applications. However, its metastability makes it more challenging to synthesize consistently compared to calcite and aragonite. This study aimed to synthesize CaCO3 from natural limestone from Padalarang, West Java, Indonesia, using a fine-bubble carbonation method, varying HCl concentrations to assess pH’s influence on vaterite formation. The method involved converting natural limestone to CaO then to Ca(OH)2 as the primary carbonation precursor. Fine CO2 bubbles were introduced into a Ca(OH)2 solution (a mixture of 5% water and 95% methanol), with HCl concentrations of 0.02 M, 0.04 M, and 0.08 M added. The carbonation process was conducted at 300 rpm, 20 ± 3 °C, and a flow rate of 1 l min−1 for 2 h. The CaCO3 powders were characterized using x-ray diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy, scanning electronic microscopy (SEM), and a particle size analyzer (PSA). The XRD result indicated that a 0.04 M HCl concentration yielded the highest vaterite content (93%). SEM shows the spherical morphology of vaterite CaCO3 both in 00.4 M and 0.08 M HCl concentrations, while FTIR confirmed the presence of calcite (712, 872, 1087 cm−1) and vaterite (744 cm−1). PSA showed that HCl concentration influenced particle size and the calcite-vaterite ratio, with Z-average particle sizes ranging from 114.8 nm to 118.2 nm.

31 March 2023 in Padjadjaran Journal of Dentistry
Verified
Journal Article
Open access
RFRenny Febrida
Renny Febrida
DSDinda Jihan Nabillah Salma
Dinda Jihan Nabillah Salma
FAFauziah Azzahra
Fauziah Azzahra
EKElin Karlina
Elin Karlina
NANiekla Survia Andiesta
Niekla Survia Andiesta
YFYanwar Faza
Yanwar Faza
Introduction: Calcite (CaCO3) is typically used in commercial toothpaste with particle size ranges from 1-12 μm. In the latest study, calcite was synthesized by using Ca(OH)2 precursor from natural resources However, the resulting particle size does not match the size of the toothpaste filler. This study aims to prepare micro-calcite via fine-bubble assisted carbonation as toothpaste material. Methods: The calcite powder was prepared from Ca(OH)2 analytical grade powder utilizing the fine-bubble carbonation process with the Ca(OH)2 concentration and initial pH variation. The study was started by making a Ca(OH)2 suspension with a concentration of 0.25, 0.5, 0.75, 1 and 1.25 M using 2.000 ml methanol as a solvent. 0.5 M NaH2PO4 solutions were utilized to adjust the initial pH of 0.5 M Ca(OH)2 suspension into 8, 9, and 10. The suspensions were aerated using CO2 fine-bubble for two hours to produce CaCO3 samples. All precipitated CaCO3 particles were characterized by PSA, Zeta-Potential, and FTIR measurements. Results: The calcite phase was identified from the FTIR transmittance. Aragonite or vaterite phase was not observed in the samples. PSA result shows the size of CaCO3 particles from samples 0.25 M to 1.25 M are as follows 3.03, 3.23, 2.79, 3.70, 0.99 μm respectively. Meanwhile, the particle sizes of CaCO3 in samples with a pH of 8, 9 and 10 are 3.00, 2.03 and 2.50 μm respectively. The zeta potential shows the value ranges from -23.2 mV to -11.9 mV, indicating fair dispersion ability. Conclusion: The fine bubble assisted carbonation method in this study helps in producing calcite in micron size that could be used as alternative fillers for toothpaste.Keywords: calcite, fine-bubble, carbonation, particle size, toothpaste