Yanwar Faza

Yanwar Faza

Auto-generated profile, based on publicly available information

Yanwar Faza

Universitas Padjadjaran

Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
9 February 2018 in AIP Conference Proceedings
Verified
Conference Paper
Closed access
PDF file
YFYanwar Faza
Yanwar Faza
ZHZulia Hasratiningsih
Zulia Hasratiningsih
AHAndrie Harmaji
Andrie Harmaji
IJI Made Joni
I Made Joni
Popularity of zirconia gained up after discovering the unique properties of zirconia called transformation toughening. Alumina is one of material used to stabilize tetragonal crystalline of zirconia in room temperature. In this study, zirconia-alumina systems have been developed in two ways mixing methods through sol-gel technique. First method was done by mixing both precursors of zirconia and alumina in the hydrolysis stage, while the second method was in the drying stage of the sol-gel technique. Phase of material was solution at hydrolisis stage and solid at drying stage. Zirconia-alumina system having the ratio 90:10 by weight (ZrO2:Al2O3). The mixture were calcined at temperature 900 °C for 2 hours. Samples were than characterized by X-Ray Diffraction to assign tetragonal crystallline of zirconia. Scanning Electron Microscope and Brunauer-Emmett-Teller characterization were conducted to observe morphology, particle size as well as surface area of samples. XRD characterization of solution phase mixing sample exhibited 94.5% tetragonal crystalline and 5.5% monoclinic crystalline. The solid phase mixing sample were 25.3% tetragonal crystalline and 74.7% monoclinic crystalline. SEM characterization showed agglomeration for both samples with particle size 8.72 µm for solution mixing method and 11.17 µm for solid mixing method. However, nano size particle were also identified. Surface area of mixed oxide are 14.164 m2/g and 13.996 m2/g respectively. As a conclusion, this results confirmed that solution mixing method was more effective to produce tetragonal crystalline of zirconia than solid phase mixing method.

1 May 2025 in Materials Research Express
Verified
Journal Article
Open access
RFRenny Febrida
Renny Febrida
SSSekar Diva Setyanagari
Sekar Diva Setyanagari
RWRevani Widjaya
Revani Widjaya
YFYanwar Faza
Yanwar Faza
FFFerry Faizal
Ferry Faizal
IJI Made Joni
I Made Joni
Natural limestone, known for its high calcium carbonate (CaCO3) content (∼95%) and safety in health applications, is widely used in science and industry. It exists in three forms: calcite, vaterite, and aragonite. Vaterite’s spherical structure, non-toxic nature, biocompatibility, and high porosity is particularly valuable for biomedical applications. However, its metastability makes it more challenging to synthesize consistently compared to calcite and aragonite. This study aimed to synthesize CaCO3 from natural limestone from Padalarang, West Java, Indonesia, using a fine-bubble carbonation method, varying HCl concentrations to assess pH’s influence on vaterite formation. The method involved converting natural limestone to CaO then to Ca(OH)2 as the primary carbonation precursor. Fine CO2 bubbles were introduced into a Ca(OH)2 solution (a mixture of 5% water and 95% methanol), with HCl concentrations of 0.02 M, 0.04 M, and 0.08 M added. The carbonation process was conducted at 300 rpm, 20 ± 3 °C, and a flow rate of 1 l min−1 for 2 h. The CaCO3 powders were characterized using x-ray diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy, scanning electronic microscopy (SEM), and a particle size analyzer (PSA). The XRD result indicated that a 0.04 M HCl concentration yielded the highest vaterite content (93%). SEM shows the spherical morphology of vaterite CaCO3 both in 00.4 M and 0.08 M HCl concentrations, while FTIR confirmed the presence of calcite (712, 872, 1087 cm−1) and vaterite (744 cm−1). PSA showed that HCl concentration influenced particle size and the calcite-vaterite ratio, with Z-average particle sizes ranging from 114.8 nm to 118.2 nm.

31 March 2023 in Padjadjaran Journal of Dentistry
Verified
Journal Article
Open access
RFRenny Febrida
Renny Febrida
DSDinda Jihan Nabillah Salma
Dinda Jihan Nabillah Salma
FAFauziah Azzahra
Fauziah Azzahra
EKElin Karlina
Elin Karlina
NANiekla Survia Andiesta
Niekla Survia Andiesta
YFYanwar Faza
Yanwar Faza
Introduction: Calcite (CaCO3) is typically used in commercial toothpaste with particle size ranges from 1-12 μm. In the latest study, calcite was synthesized by using Ca(OH)2 precursor from natural resources However, the resulting particle size does not match the size of the toothpaste filler. This study aims to prepare micro-calcite via fine-bubble assisted carbonation as toothpaste material. Methods: The calcite powder was prepared from Ca(OH)2 analytical grade powder utilizing the fine-bubble carbonation process with the Ca(OH)2 concentration and initial pH variation. The study was started by making a Ca(OH)2 suspension with a concentration of 0.25, 0.5, 0.75, 1 and 1.25 M using 2.000 ml methanol as a solvent. 0.5 M NaH2PO4 solutions were utilized to adjust the initial pH of 0.5 M Ca(OH)2 suspension into 8, 9, and 10. The suspensions were aerated using CO2 fine-bubble for two hours to produce CaCO3 samples. All precipitated CaCO3 particles were characterized by PSA, Zeta-Potential, and FTIR measurements. Results: The calcite phase was identified from the FTIR transmittance. Aragonite or vaterite phase was not observed in the samples. PSA result shows the size of CaCO3 particles from samples 0.25 M to 1.25 M are as follows 3.03, 3.23, 2.79, 3.70, 0.99 μm respectively. Meanwhile, the particle sizes of CaCO3 in samples with a pH of 8, 9 and 10 are 3.00, 2.03 and 2.50 μm respectively. The zeta potential shows the value ranges from -23.2 mV to -11.9 mV, indicating fair dispersion ability. Conclusion: The fine bubble assisted carbonation method in this study helps in producing calcite in micron size that could be used as alternative fillers for toothpaste.Keywords: calcite, fine-bubble, carbonation, particle size, toothpaste

12 December 2023 in B-Dent: Jurnal Kedokteran Gigi Universitas Baiturrahmah
Verified
Journal Article
Open access
PDF file
YFYanwar Faza
Yanwar Faza
VTVeni Takarini
Veni Takarini
RFRenny Febrida
Renny Febrida
EKElin Karlina
Elin Karlina
Background: Macro-sized and inhomogeneous distribution of ceramic filer particles make it difficult to obtain smooth surfaces of dental composite after polishing. Objective. This study aims to synthesize alumina silica (Al2O3-SiO2) fillers using sol gel method with the additives agent chitosan 5%, 10% and polyethylene glycol (PEG) 5% to produce micro particle size and evenly distributed particle as filler dental composite. Methods. The type of research is descriptive explorative. The sol-gel process was utilized to synthesize filler particles of Al2O3-SiO2. TEOS was dissolved in ethanol and mixed with acetic acid as catalyts. Al2(NO3)3 was added into the solution and mixed homogenously. Subsequently, the additive agents (Chitosan 5%, chitosan 10% and PEG) were mixed into the mixture for 30 minutes. Drying the samples for 48 hours at 60°C in the oven. The Dynamic light scattering (DLS) SZ-1 was used to evaluate the size, particle distribution and zeta potential. Result. The results showed that the addition of chitosan 10% produced a smaller size of Al2O3-SiO2 compared to other samples. A homogeneous particle distribution is shown in the sample with PEG 5%. Meanwhile, zeta potential values of the filler particles Al2O3-SiO2 with the addition of chitosan 10% shows the biggest value. Conclusion: The additive agent of chitosan 10% can modify the surface of filler Al2O3-SiO2 in order to inhibit particle growth more effectively but better particle distribution is shown in samples with PEG 5% due to the lower viscosity than chitosan thus it is easily homogenized in the solution

31 October 2021 in Padjadjaran Journal of Dental Researchers and Students
Verified
Journal Article
Open access
PDF file
NDNina Djustiana
Nina Djustiana
YFYanwar Faza
Yanwar Faza
AHAndri Hardiansyah
Andri Hardiansyah
Uji sitotoksisitas mikrofiber PMMA dan PMMA-Silika wetspinning pada kultur sel primer L-929 sebagai aplikasi penguat jembatan gigi direk Cytotoxicity test of PMMA and PMMA-Silica wet spinning microfibers in L-929 primary cell culture as a direct dental bridge reinforcement application

31 July 2022 in Padjadjaran Journal of Dentistry
Verified
Journal Article
Open access
PDF file
RFRenny Febrida
Renny Febrida
MWMadeiva Wulanhapsari
Madeiva Wulanhapsari
YFYanwar Faza
Yanwar Faza
EKElin Karlina
Elin Karlina
Arief CahyantoArief Cahyanto
Arief Cahyanto
Diana RakhmawatyDiana Rakhmawaty
Diana Rakhmawaty
Introduction: Rice husk silica has been studied as a filler in dental composite, however, the mechanical properties of the resulting composites are below the commercial due to the poor surface modification between silica and resin matrix. 3-methacryloxyprpyltrimethoxysilane (MPTS) is one of the coupling agents that are effective to modify the silica surface. The purpose of this study to analyze the effect of MPTS on the diametral tensile strength (DTS) of the self-made composite using rice husk silica. Methods: The research type of this study was an experimental research laboratory. The samples (26 samples) were divided into two groups, namely the test group (using MPTS-modified silica) and the control group (using non-modified silica). The samples were cylindrical in shape with a diameter of 6.0 ± 0.1 mm and a height of 3.0 ± 0.1 mm according to ANSI/ADAS No. 27, 1993 and ISO 4049, 1988. The Fourier Transform Infrared (FTIR), HORIBA, was used to characterize the MPTS grafting on the silica surface. The DTS value is measured by Universal Testing Machine (UTM), Lloyd LRX Plus. Results: FTIR presents the additional peak of carboxyl and methacryloyl group at 1716, 1555, and 1410 cm-1 wavenumber, respectively in MPTS-modified silica. The DTS value of the test group was 43.40 ± 4.43 MPa and the control group was 25.80 ± 2.63 MPa. The test group was significantly higher than the control group (p-value = 0.001). Conclusion: The MPTS is effective to enhance the DTS value of rice husk silica-based composite.Keywords: Rice husk silica; dental composite; diametral tensile strength; 3-methacryloxypropyltrimethoxysilane.