The article presents a concept for a new design of the well-known Transverse Flux Machine (TFM) made with the use of a flat core used in classical electrical machines. The proposed design was first analytically verified and was subsequently verified using the finite element method, which fully corroborated the results. The simulations show that a set of three single-phase TFM machines with slotted flat rotor yokes generates a torque over three times greater than that of an induction motor and twice as large as Fractional Slot Concentrated Winding—Permanent Magnet Synchronous Machines (FSCW-PMSM). The performed comparative calculations confirmed that the torque generated by machines operating on principles similar to TFM can generate a torque much greater than those currently in common use.
The paper presents the results of laboratory tests and FEM 2D calculations of the DCEFSM (Direct Current Excited Flux Switching Machine) electric motor prototype, made based on the stator ferromagnetic sheets of the induction motor. Static measurements of torques, currents, power, efficiency, electromotive forces, and voltages of the motor under various operating conditions were performed, as well as the recordings of its currents and back-EMFs waveforms. FEM calculations of measured values were also performed. The obtained results allow us to conclude that the motor has the operating properties of an under-excited synchronous cylindrical motor and can be vector controlled like the PMSM motor. The results of measurements and calculations indicate the need to redesign the magnetic circuit of the stator.