Cadmium and lead soil contamination is a widespread environmental problem that requires profound and sustainable solutions. These toxic elements can be naturally occurring on the Earth’s crust or from man-made origins. Cadmium and lead could accumulate and translocate in soil over the long term. Thus, their risk of entering the food chain is extremely elevated and their effects on the living organisms in the food web are of great concern. The main purpose of this review study is to emphasize the risk to human health of cadmium and lead as an environmental contaminant in soil and plants. Human exposure to cadmium and lead can cause severe illness; for instance, long-term exposure to cadmium can alter kidney health and cause dysfunction. Additionally, lead threatens the nervous system and causes countless diseases. Hence, the remediation of cadmium and lead from soil before they enter the food chain remains essential, and regular monitoring of their principal sources is crucially needed for a sustainable soil ecosystem.

Here, we present an innovative and creative sustainable technique for the fabrication of titania (TiO₂) using Acorus calamus (A. calamus) leaf extract as a new biogenic source, as well as a capping and reducing agent. The optical, structural, morphological, surface, and thermal characteristics of biosynthesized nanoparticles were investigated using UV, FTIR, SEM, DLS, BET, and TGA-DSC analysis. The phase formation and presence of nanocrystalline TiO₂ were revealed by the XRD pattern. FTIR analysis revealed conjugation, as well as the presence of Ti–O and O–H vibrational bands. The nanoparticles were noticed to be globular, with an average size of 15–40 nm, according to the morphological analysis, and the impact of size quantification was also investigated using DLS. The photocatalytic activity of bare, commercial P-25 and biosynthesized TiO₂ (G-TiO₂) nanoparticles in aqueous solution of rhodamine B (RhB) dye was investigated under visible light irradiation at different time intervals. The biosynthesized TiO₂ nanoparticles exhibited strong photocatalytic activity, degrading 96.59% of the RhB dye. Different kinetic representations were utilized to analyze equilibrium details. The pseudo-first-order reaction was best suited with equilibrium rate constant (K₁) and regression coefficients (R²) values 3.72 × 10⁻⁴ and 0.99, respectively. The antimicrobial efficacy of the prepared nanoparticles was investigated using the disc diffusion technique. Further, biosynthesized TiO₂ showed excellent antimicrobial activity against the selected gram-positive staining (B. subtilis, S. aureus) over gram-negative (P. aeruginosa, E. coli) pathogenic bacteria in comparison to bare TiO₂.

In this study, we aimed to observe how different operating parameters influenced the photocatalytic degradation of rhodamine B (RhB, cationic dye) and bromophenol Blue (BPB, anionic dye) over ZnO/CuO under visible light irradiation. This further corroborated the optimization study employing the response surface methodology (RSM) based on central composite design (CCD). The synthesis of the ZnO/CuO nanocomposite was carried out using the co-precipitation method. The synthesized samples were characterized via the XRD, FT-IR, FE-SEM, Raman, and BET techniques. The characterization revealed that the nanostructured ZnO/CuO formulation showed the highest surface area (83.13 m²·g⁻¹). Its surface area was much higher than that of pure ZnO and CuO, thereby inheriting the highest photocatalytic activity. To substantiate this photocatalytic action, the investigative analysis was carried out at room temperature, associating first-order kinetics at a rate constant of 0.0464 min⁻¹ for BPB and 0.07091 min⁻¹ for RhB. We examined and assessed the binary interactions of the catalyst dosage, concentration of dye, and irradiation time. The suggested equation, with a high regression R² value of 0.99701 for BPB and 0.9977 for RhB, accurately matched the experimental results. Through ANOVA we found that the most relevant individual parameter was the irradiation time, followed by catalyst dose and dye concentration. In a validation experiment, RSM based on CCD was found to be suitable for the optimization of the photocatalytic degradation of BPB and RhB over ZnO/CuO photocatalysts, with 98% degradation efficiency.

Organic–inorganic nanoparticles, which can improve and modify the mechanical and chemical properties of polymers, have been used as fillers to prepare high-performance hybrid nanocomposite membranes. In this study, we explored whether the incorporation of organic nanofillers (graphene (G), graphene oxide (GO), carbon nanotubes (CNTs), or oxidized carbon nanotubes (CNTOxi)) into polysulfone (PSF) and montmorillonite (MMt)-modified PSF membranes could enhance membrane performance for the removal of heavy metal ions from contaminated solutions. These hybrid membranes were prepared by a phase inversion method using chloroform as the solvent. The surface morphologies of the membranes revealed good dispersibility of the organoclay and carbon nanomaterials in the PSF matrix. The hybrid nanocomposite membranes showed significantly improved thermal stability and mechanical properties as compared to the pristine PSF and PSF/MMt membranes. The adsorption efficiencies of these hybrid adsorptive membranes for Hg(II), Pb(II), Sr(II), Fe(III), Zn(II), Ni(II), Al(III), Co(II), Y(III), and Cr(III) were investigated. The PSF/MMt/CNTOxi and PSF/MMt/GO membranes exhibited the highest adsorption efficiencies. In particular, these adsorptive membranes showed selectivity toward Hg(II), and the Hg(II) extraction percentage was maximized at pH 2. The maximum Hg(II) adsorption capacities of PSF/MMt/CNTOxi and PSF/MMt/GO were 151.36 and 144.89 mg/g, respectively, and the adsorption isotherm was in approval with the Langmuir model. These hybrid nanocomposites can be used in water purification application.

Polycyclic aromatic hydrocarbons are compounds with 2 or more benzene rings, and 16 of them have been classified as priority pollutants. Among them, pyrene has been found in higher concentrations than recommended, posing a threat to the ecosystem. Many bacterial strains have been identified as pyrene degraders. Most of them belong to Gram-positive strains such as Mycobacterium sp. and Rhodococcus sp. These strains were enriched and isolated from several sites contaminated with petroleum products, such as fuel stations. The bioremediation of pyrene via Mycobacterium strains is the main objective of this review. The scattered data on the degradation efficiency, formation of pyrene metabolites, bio-toxicity of pyrene and its metabolites, and proposed degradation pathways were collected in this work. The study revealed that most of the Mycobacterium strains were capable of degrading pyrene efficiently. The main metabolites of pyrene were 4,5-dihydroxy pyrene, phenanthrene-4,5-dicarboxylate, phthalic acid, and pyrene-4,5-dihydrodiol. Some metabolites showed positive results for the Ames mutagenicity prediction test, such as 1,2-phenanthrenedicarboxylic acid, 1-hydroxypyrene, 4,5-dihydropyrene, 4-phenanthrene-carboxylic acid, 3,4-dihydroxyphenanthrene, monohydroxy pyrene, and 9,10-phenanthrenequinone. However, 4-phenanthrol showed positive results for experimental and prediction tests. This study may contribute to enhancing the bioremediation of pyrene in a different matrix.

Nature has always inspired innovative minds for development of new designs. Animals and plants provide various structures with lower density, more strength and high energy sorption abilities that can incite the development of new designs with significant properties. By observing the important functions of biological structures found in nature, scientists have fabricated structures by bio-inspiration that have been proved to exhibit a significant improvement over traditional structures for their applications in the environmental and energy sector. Bio-fabricated materials have shown many advantages due to their easy synthesis, flexible nature, high performance and multiple functions as these can be used in light harvesting systems, batteries, biofuels, catalysis, purification of water, air and environmental monitoring. However, there is an urgent need for sensitive fabrication instruments that can synthesize bio-inspired structures and convert laboratory scale synthesis into large scale production. The present review highlights recent advances in synthesis of bio-inspired materials and use of hierarchical nanomaterials generated through biomolecular self-assembly for their use in removal of environmental contaminants and sustainable development.